陈军 - 上海交通大学 - 材料科学与工程学院

个人简介

1986.9-1993.7 山东工业大学材料科学与工程系本科、硕士 1993.9-1996.7 上海交通大学塑性成形工程系博士 1996.8-1998.4 上海交通大学塑性成形工程系讲师 1998.4-1999.4 美国密歇根大学访问学者 1999.4-2004.8 上海交通大学塑性成形工程系副教授 2004.9-2004.12 上海交通大学塑性成形工程系教授，2004.10起任模具CAD国家工程研究中心副主任 2004.12-2011.4 上海交通大学塑性成形工程系教授、博导，期间，2006.7-2011.4任上海交通大学塑性成形工程系副主任 2011.4- 今上海交通大学材料学院塑性成形技术与装备研究院教授、博导 2011.4- 2015.5 上海交通大学材料学院塑性成形技术与装备研究院副院长 2015.5- 今上海交通大学材料学院塑性成形技术与装备研究院院长

个人简介

研究领域

轻质高强薄板塑性成形与数控渐进成形塑性成形力学模型与数值仿真、设计优化

研究领域

专业：

研究方向：

研究领域和兴趣：

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

Zhidong Chang, Jun Chen*. Analytical model and experimental validation of surface roughness for incremental sheet metal forming parts, International Journal of Machine Tools and Manufacture, 146 (2019) 103453 Zhidong Chang, Jun Chen*. Mechanism of the twisting in incremental sheet forming process, Journal of Materials Processing Technology, 276 (2020) 116396 Renhao Wu, Qi Hu, Meng Li, Sheng Cai, Jun Chen*. Evaluation of the forming limit of incremental sheet forming based on ductile damage, Journal of Materials Processing Technology, 2019, Article in press Zhiheng Wang, Sheng Cai, Jun Chen*. Experimental investigations on friction stir assisted single point incremental forming of low-ductility aluminum alloy sheet for higher formability with reasonable surface quality, Journal of Materials Processing Technology, 2019, Article in press Xifeng Li, Xin Chen, Baoyong Li, Nannan Chen, Jun Chen*. Grain refinement mechanism of Ti-55 titanium alloy by hydrogenation and dehydrogenation treatment, Materials Characterization, 157 (2019) 109919 Zhidong Chang, Meng Li Ming Li, Jun Chen*. Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes, 2019, International Journal of Machine Tools and Manufacture 140: 62-76 Qi Hu, Li Zhang, Qiubao Ouyang, Xifeng Li, Xinhai Zhu, Jun Chen*. Prediction of forming limits for anisotropic materials with nonlinear strain paths by an instability approach,2018, International Journal of Plasticity,103:143-167 Qi Hu, Xifeng Li, Jun Chen*. New robust algorithms for Marciniak-Kuczynski model to calculate the forming limit diagrams, 2018, International Journal of Mechanical Sciences, 148: 293-306 Huan Zhang, Zixuan Zhang, Huaqing Ren, Jian Cao, Jun Chen*. Deformation mechanics and failure mode in stretch and shrink flanging by double-sided incremental forming, 2018, International Journal of Mechanical Sciences, 144: 216-222 Xifeng Li, Nanan Chen, H Wu, Jun Chen*, F Qu. Low-temperature superplastic gas bulging of Ti-55 alloy by hydrogen addition, 2018, International Journal of Hydrogen Energy, 43(27): 12455-12459 Qi Hu, Xifeng Li, Jun Chen*. On the calculation of plastic strain by simple method under non-associated flow rule, 2018, European Journal of Mechanics, A/Solids, 67: 45-57 Qi Hu, Xifeng Li, Xianhong Han, Heng Li, Jun Chen*. A normalized stress invariant-based yield criterion: modeling and validation, 2017, International Journal of Plasticity 99: 248-273 Qi Hu, Xifeng Li, Jun Chen*. On the calculation of plastic strain by simple method under nonassociated flow rule, 2018, European Journal of Mechanics A/Solids 67: 45-57 Xianhong Han, Yaoyao Zhong, Shulin Tan, Yanan Ding, Jun Chen*. Microstructure and performance evaluations on Q&P hot stamping parts of several UHSS sheet metals, Science China Technological Sciences, 2017, doi: 10.1007/s11431-016-9111-y Qi Hu, Xifeng Li, Xianhong Han, Jun Chen*. A new shear and tension based ductile fracture criterion: modeling and validation, 2017, European Journal of Mechanics A/Solids, 66: 370-386 Xifeng Li, Nannan Chen, Jun Chen*, Qiongfeng Mei, Li Wan, CL Jia, H Liu. Superplastic deformation behavior of Ti-55 alloy without and with 0.1wt%H addition, Materials Science & Engineering A, 2017 Xifeng Li, Jun Jiang, Shen Wang, Jun Chen*,YQ Wang. Effect of hydrogen on the microstructure and superplasticity of Ti-55 alloy, International Journal of Hydrogen Energy, 2017 (42): 6338-6349 Tingting Cao, Bin Lu, Hengan Ou, Hui Long, Jun Chen*. Investigation on a new hole-flanging approach by incremental sheet forming though a featured tool. International journal of Machine Tools and Manufacture, 2016, 110:1-17 Xiangyu Yu, Jun Chen*, Jieshi Chen. Interaction effect of cracks and anisotropic influence on degradation of edge stretchability in hole-expansion of advanced high-strength steel, International Journal of Mechanical Sciences, 2016(105):348-359 Bin Lu Yang Fang, Dongkai Xu, Jun Chen*, Sheng Ai, Hui Long, Hengan Ou, Jian Cao. Investigation of material deformation mechanism in double side incremental sheet forming. International Journal of Machine Tools and Manufacture, 2015 (93): 37-48

近期论文

Zhidong Chang, Jun Chen*. Analytical model and experimental validation of surface roughness for incremental sheet metal forming parts, International Journal of Machine Tools and Manufacture, 146 (2019) 103453

Zhidong Chang, Jun Chen*. Mechanism of the twisting in incremental sheet forming process, Journal of Materials Processing Technology, 276 (2020) 116396

Renhao Wu, Qi Hu, Meng Li, Sheng Cai, Jun Chen*. Evaluation of the forming limit of incremental sheet forming based on ductile damage, Journal of Materials Processing Technology, 2019, Article in press

Zhiheng Wang, Sheng Cai, Jun Chen*. Experimental investigations on friction stir assisted single point incremental forming of low-ductility aluminum alloy sheet for higher formability with reasonable surface quality, Journal of Materials Processing Technology, 2019, Article in press

Xifeng Li, Xin Chen, Baoyong Li, Nannan Chen, Jun Chen*. Grain refinement mechanism of Ti-55 titanium alloy by hydrogenation and dehydrogenation treatment, Materials Characterization, 157 (2019) 109919

Zhidong Chang, Meng Li Ming Li, Jun Chen*. Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes, 2019, International Journal of Machine Tools and Manufacture 140: 62-76

Qi Hu, Li Zhang, Qiubao Ouyang, Xifeng Li, Xinhai Zhu, Jun Chen*. Prediction of forming limits for anisotropic materials with nonlinear strain paths by an instability approach,2018, International Journal of Plasticity,103:143-167

Qi Hu, Xifeng Li, Jun Chen*. New robust algorithms for Marciniak-Kuczynski model to calculate the forming limit diagrams, 2018, International Journal of Mechanical Sciences, 148: 293-306

Huan Zhang, Zixuan Zhang, Huaqing Ren, Jian Cao, Jun Chen*. Deformation mechanics and failure mode in stretch and shrink flanging by double-sided incremental forming, 2018, International Journal of Mechanical Sciences, 144: 216-222

Xifeng Li, Nanan Chen, H Wu, Jun Chen*, F Qu. Low-temperature superplastic gas bulging of Ti-55 alloy by hydrogen addition, 2018, International Journal of Hydrogen Energy, 43(27): 12455-12459

Qi Hu, Xifeng Li, Jun Chen*. On the calculation of plastic strain by simple method under non-associated flow rule, 2018, European Journal of Mechanics, A/Solids, 67: 45-57

Qi Hu, Xifeng Li, Xianhong Han, Heng Li, Jun Chen*. A normalized stress invariant-based yield criterion: modeling and validation, 2017, International Journal of Plasticity 99: 248-273

Qi Hu, Xifeng Li, Jun Chen*. On the calculation of plastic strain by simple method under nonassociated flow rule, 2018, European Journal of Mechanics A/Solids 67: 45-57

Xianhong Han, Yaoyao Zhong, Shulin Tan, Yanan Ding, Jun Chen*. Microstructure and performance evaluations on Q&P hot stamping parts of several UHSS sheet metals, Science China Technological Sciences, 2017, doi: 10.1007/s11431-016-9111-y

Qi Hu, Xifeng Li, Xianhong Han, Jun Chen*. A new shear and tension based ductile fracture criterion: modeling and validation, 2017, European Journal of Mechanics A/Solids, 66: 370-386

Xifeng Li, Nannan Chen, Jun Chen*, Qiongfeng Mei, Li Wan, CL Jia, H Liu. Superplastic deformation behavior of Ti-55 alloy without and with 0.1wt%H addition, Materials Science & Engineering A, 2017

Xifeng Li, Jun Jiang, Shen Wang, Jun Chen*,YQ Wang. Effect of hydrogen on the microstructure and superplasticity of Ti-55 alloy, International Journal of Hydrogen Energy, 2017 (42): 6338-6349

Tingting Cao, Bin Lu, Hengan Ou, Hui Long, Jun Chen*. Investigation on a new hole-flanging approach by incremental sheet forming though a featured tool. International journal of Machine Tools and Manufacture, 2016, 110:1-17

Xiangyu Yu, Jun Chen*, Jieshi Chen. Interaction effect of cracks and anisotropic influence on degradation of edge stretchability in hole-expansion of advanced high-strength steel, International Journal of Mechanical Sciences, 2016(105):348-359

Bin Lu Yang Fang, Dongkai Xu, Jun Chen*, Sheng Ai, Hui Long, Hengan Ou, Jian Cao. Investigation of material deformation mechanism in double side incremental sheet forming. International Journal of Machine Tools and Manufacture, 2015 (93): 37-48