Experimental Heat Transfer provides a forum for experimentally based high quality research articles and communications in the general area of heat-mass transfer and the related energy fields. 
In addition to the established multifaceted areas of heat transfer and the associated thermal energy conversion, transport, and storage, the journal also communicates contributions from new and emerging areas of research such as micro- and nanoscale science and technology, life sciences and biomedical engineering, manufacturing processes, materials science, and engineering. Heat transfer plays an important role in all of these areas, particularly in the form of innovative experiments and systems for direct measurements and analysis, as well as to verify or complement theoretical models.
All submitted manuscripts are subject to initial appraisal by the Editor, and, if found suitable for further consideration, to peer review by independent, anonymous expert referees. All peer reviews are single blind and submission is online via ScholarOne Manuscripts. Original, normal size articles, as well as technical notes are considered. Review articles require previous communication and approval by the Editor before submission for further consideration. 

EDITOR-IN-CHIEF
 
Dimos Poulikakos 
Department of Mechanical and Process Engineering 
Swiss Federal Institute of Technology 
Sonneggstrasse 3, Zurich, CH-8092 
Switzerland 
dimos.poulikakos@ethz.ch

FOUNDING EDITOR
C. L. Tien
EDITORS
Suresh V. Garimella - Cooling Technologies Research Center, School of Mechanical Engineering, Purdue University, 585 Purdue Mall, West Lafayette, IN 47907-2088, USA, sureshg@ecn.purdue.edu 
Joon Sik Lee - School of Mechanical & Aerospace Engineering, Seoul National University, Seoul 151-742, South Korea, jslee123@snu.ac.kr 
J. H. Lienhard V - Department of Mechanical Engineering, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Room 3-162,  Cambridge, MA 02139, USA, lienhard@mit.edu 
Shigeano Maruyama - Institute of Fluid Science, Tohoku University, Katahira 2, Aoba-ku, Sendai 980-8577, Japan, maruyama@ifs.tohoku.ac.jp 
J. P. Meyer - School of Engineering, Dept. of Mechanical & Aeronautical Engineering, University of Pretoria, Pretoria 0002, South Africa, jmeyer@up.ac.za 
Ishwar K. Puri - Dean of Engineering, McMaster University, John Hodgins Engineering Bldg. Room 261, 1280 Main St. W., Hamilton, Ontario L8S 4L7, Canada, ikpuri@mcmaster.ca 
J. W. Rose  - Department of Mechanical Engineering, Queen Mary & Westfield College, University of London, Mile End Road, London E1 4NS, United Kingdom, j.w.rose@qmw.ac.uk 
Peter Stephan - Dept. of Technical Thermodynamics, Darmstadt University of Technology, Petersenstr. 30, D-64287 Darmstadt, Germany, pstephan@ttd.tu-darmstadt.de
EDITORIAL ADVISORY BOARD
J. C. Chen  -  Department of Chemical Engineering, Lehigh University, USA 
Ping Cheng -  Department of Mechanical Engineering, Shanghai Jiao Tong University 
Yujiro Hayashi -  Kanazawa University, Japan 
Melany L. Hunt -  Division of Engineering and Applied Science, California Institute of Technology, USA 
Peixue Jiang -  Thermal Engineering Department, Tsinghua University, China 
A. I. Leontiev -  National Committee of Heat & Mass Transfer, IVT RAN, NCHMT, Russia 
Arun Majumdar -  Dept. of Mechanical Engineering, University of California at Berkeley, USA 
Per F. Peterson -  Dept. of Nuclear Engineering, University of California at Berkeley, USA 
Gary Rosengarten -  School of Aerospace, Mechanical and Manufacturing Engineering, RMIT University, Australia 
K. Vafai -  Department of Mechanical Engineering, University of California, Riverside