收稿范围 |
Surface and Coatings Technology is an international archival journal publishing scientific papers on surface and interface engineering to modify and improve the surface properties of materials for protection in demanding contact conditions or aggressive environments, or for enhanced functional performance. Contributions range from original scientific articles concerned with applied research or direct applications of coatings, to invited reviews of current technology in specific areas. Papers submitted to this journal are expected to be in line with the following aspects in processes, and properties/performance: A. Processes: Physical and chemical vapour deposition techniques, thermal and plasma spraying, surface modification by directed energy techniques such as ion, electron and laser beams, thermo-chemical treatment, wet chemical and electrochemical processes such as plating, sol-gel coating, anodization, plasma electrolytic oxidation, etc., but excluding painting. B. Properties/performance: friction performance, wear resistance (e.g., abrasion, erosion, fretting, etc), corrosion and oxidation resistance, thermal protection, diffusion resistance, hydrophilicity/hydrophobicity, and properties relevant to enhanced functional performance for environmental, energy and medical applications, but excluding device aspects. Articles must go beyond the technical recipe format and gain new understanding and insight based on detailed characterization of coatings and processes. Experimental papers should provide complete information on the process parameters and an appropriate microstructural characterization. Also, papers which include test data should provide full details of the test equipment and parameters. Such papers should report on the synthesis-characterization-properties-performance relationships. Manuscripts must be written in good English and contain a balanced and up-to-date reference list formatted according to the guide-for-authors.
|
编辑信息 |
Editor-in-Chief Professor A. MatthewsThe University of Manchester School of Materials, Sackville Street Building, M1 3BB, Manchester, United Kingdom Email Professor A. MatthewsEditors Professor G. Abadias Pprime Institute, 43 rue de l' Aerodrome, 86036, Futuroscope, France Phone +33 5 49 49 67 48 Email Professor G. Abadias Thin film growth; Stress evolution and stress measurement in thin films; Multilayer and nanocomposite films; Mechanical Properties; Nitrides; Hard coatings; Structure and properties of Interfaces Professor S. AouadiUniversity of North Texas Department of Materials Science and Engineering, 1155 Union Circle #305310, Denton, Texas, 76203-5017, United States Email Professor S. AouadiSputtering; Atomic Layer Deposition; Surface Engineering; Self-healing; Tribology, Biomaterials; Oxides; Nitrides; CarbidesProfessor L. LusvarghiUniversity of Modena and Reggio Emilia Department of Engineering Enzo Ferrari, Via Vignolese, 905/B, 41100, Modena, Italy Phone +393356750725 Email Professor L. Lusvarghi Thermal spraying; Low friction films/solid lubricants by vacuum processes; Tribology; Corrosion protection; Microscopic characterization (FEG-SEM, FIB)Professor H.C. ManThe Hong Kong Polytechnic University Department of Industrial and Systems Engineering, Hung Hom, Kowloon, Hong Kong Phone + 852 2766 6629 Email Professor H.C. ManDr. P.J. MartinCSIRO Australian Manufacturing and Materials Precinct, Normandy Road, Clayton, 3168, Australia Phone +61 2 9413 7126 Email Dr. P.J. MartinEvatec Process Systems AG, CH-9477, Trübbach, Switzerland Phone +41 81 403 86 09Email Dr. J. Patscheider Thin Films; nitrides, carbides, DLC, oxides; Low -pressure plasmas; Nanostructured thin films; Optically transparent coatings, thin films for electronic applications; Surface and structural analysis (XPS, AES, XRD, TEM) Professor I. PetrovUniversity of Illinois at Urbana-Champaign Department of Materials Science and Engineering, 104 S. Goodwin, Urbana, Illinois, 61801-2920, United States Phone +1 217 333 8396 Email Professor I. Petrov Sputter deposition; Materials characterization; Epitaxy; Transition metal nitrides; Hard coatingsProfessor C. RebholzUniversity of Cyprus Department of Mechanical & Manufacturing Engineering, 75 Kallipoleos Street, 1678, Lefkosia, Cyprus Phone +357 22 892282 Email Professor C. Rebholz Surface engieering technologies; Thin films and coatings; Tribological coatings; Nanostructured materials; Nanoscale manufacturing technologies; Laster materials processingProfessor S.M.A. ShibliUniversity of Kerala Department of Chemistry, 695 581, Trivandrum, India Phone +91 471 2308682 Email Professor S.M.A. Shibli Hot-dip and galvanised coatings; Electroless and composite coatings; Electrocatalytic coatings; Soft metal / alloy coatings including Al and Zn alloyManaging Editor Editorial Board A. AgarwalFlorida International University, Miami, Florida, United StatesH. BaránkováUppsala University, Uppsala, SwedenUniversity of Cambridge Department of Materials Science and Metallurgy, Cambridge, England, United Kingdom K. BobzinRWTH Aachen University Institute of Surface Engineering, Aachen, GermanyL.B. BoinovichFrumkin Institute of Physical Chemistry and Electrochemistry RAS, Moskva, Russian FederationG. BolelliUniversity of Modena and Reggio Emilia, Modena, ItalyS.P. BrühlNational Technological University Conception of Uruguay Regional Faculty, Concepción del Uruguay, ArgentinaI.E. Campos SilvaNational Polytechnic Institute Zacatenco Unit Surface Engineering Group, Ciudad de México, MexicoR.R. ChromikMcGill University, Montréal, Quebec, CanadaP.K. ChuCity University of Hong Kong, Kowloon, Hong KongY.W. ChungNorthwestern University, Evanston, Illinois, United StatesUniversity of Groningen Zernike Institute for Advanced Materials, Groningen, Netherlands M. Fenkerfem Research Institute for Precious Metals and Metal Chemistry, Schwabisch Gmund, GermanyC.A. FigueroaUniversity of Caxias do Sul, CAXIAS DO SUL, BrazilV. de Freitas Cunha LinsFederal University of Minas Gerais Department of Chemical Engineering, BELO HORIZONTE, BrazilM. GuaglianoPolytechnic University of Milan, Milano, ItalyR.B. HeimannGoerlitz, GermanyC.T. KwokUniversity of Macau, Taipa, MacaoJ.-W. LeeMing Chi University of Technology Department of Materials Engineering, Taipei, TaiwanX.P. LuNortheastern University, Shenyang, ChinaD. ManovaLeibniz Institute of Surface Engineering, Leipzig, GermanyTU Wien University, Wien, Austria C. MittererUniversity of Mining, Leoben, AustriaM.F. MontemorUniversity of Lisbon Higher Technical Institute, Lisboa, PortugalA.S.C.M. d'OliveiraFederal University of Parana, Curitiba, BrazilLimoges University, Limoges, France Institute of metals and technology, Ljubljana, Slovenia N. SchalkUniversity of Mining, Leoben, AustriaRWTH Aachen University, Aachen, Germany S.Z. ShanyongNanyang Technological University, Singapore, SingaporeW.D. SproulGencoa Ltd, Liverpool, United KingdomM. StueberKarlsruhe Institute of Technology Institute for Applied Materials, Eggenstein-Leopoldshafen, GermanyX.B TianHarbin Institute of Technology, Haerbin, ChinaA. VeselJozef Stefan Institute, Ljubljana, SloveniaV. VitryUniversity of Mons, Mons, BelgiumF.C. WalshUniversity of Southampton, Southampton, United KingdomS.G. WaltonUS Naval Research Laboratory, Washington, District of Columbia, United StatesM.S. WongNational Dong Hwa University - Meilun Campus, Hualien, TaiwanA. YerokhinThe University of Manchester, Manchester, United KingdomY. ZuoBeijing University of Chemical Technology, Beijing, China
|