Machining Science and Technology publishes original scientific and technical papers and review articles on topics related to traditional and nontraditional machining processes performed on all materials—metals and advanced alloys, polymers, ceramics, composites, and biomaterials.
Topics covered include:
machining performance of all materials, including lightweight materials
coated and special cutting tools: design and machining performance evaluation
predictive models for machining performance and optimization, including machining dynamics
measurement and analysis of machined surfaces
sustainable machining: dry, near-dry, or Minimum Quantity Lubrication (MQL) and cryogenic machining processes
precision and micro/nano machining
design and implementation of in-process sensors for monitoring and control of machining performance
surface integrity in machining processes, including detection and characterization of machining damage
new and advanced abrasive machining processes: design and performance analysis
cutting fluids and special coolants/lubricants
nontraditional and hybrid machining processes, including EDM, ECM, laser and plasma-assisted machining, waterjet and abrasive waterjet machining
All submitted manuscripts are subject to initial appraisal by the Editor, and, if found suitable for further consideration, to peer review by independent, anonymous expert referees. All peer review is single blind and submission is online via ScholareOne Manuscripts. 

EXECUTIVE EDITOR:
S. Jahanmir 
Boston Tribology Associates 
955 Massachusetts Ave., #410 
Cambridge, MA 02139, USA 
Said@BostonTribology.com
EDITORIAL OFFICE 
University of Kentucky 
Department of mechanical Engineering 425
CRMS Building 
Lexington, KY 40506-0108
TECHNICAL EDITOR:
I. S. Jawahir 
University of Kentucky 
Department of Mechanical Engineering 
414C, CRMS Building 
Lexington, KY 40506-0108, USA 
is.jawahir@uky.edu
SPECIAL ISSUES EDITOR: 

Professor Philip Koshy 
McMaster University
Department of Mechanical Engineering
326E John Hodgins Engineering Building 
Hamilton, Ontario L8S 4L7 
Canada 
koshy@mcmaster.ca
  
EDITORIAL ASSISTANTS
 
James Caudill 
mst.editorial.assistant@gmail.com
 
ASSOCIATE TECHNICAL EDITORS: 
P. Arrazola - University of Mondragon, Mondragon, Spain 
C. Guo -  United Technologies Research Center, East Hartford, CT, USA 
Y. Guo – The University of Alabama, Tuscaloosa, AL USA 
V.K. Jain - Department of Mechanical Engineering, Indian Institute of Technology, Kanpur, India 
S. Joshi -  Indian Institute of Technology Bombay, Mumbai, India 
Y. Kaynak - Marmara University, Istanbul, Turkey
H. A. Kishawy - University of Ontario Institute of Technology, Oshawa, Ontario, Canada 
B. Linke  - Uuniversity of California at Davis, Davis, CA, USA 
J.C. Outeiro – Portuguese Catholic University, Sintra, Portugal 
J. Samuel - Rensselaer Polytechnic Institute, Troy, NY 
S. Sharif - Universiti Teknologi Malaysia, Johor, Malaysia 
S.L. Soo - University of Birmingham, Birmingham, United Kingdom.
D. Umbrello - University of Calabria, Cosenza, Italy 
J. Wang - The University of New South Wales, Sydney, Australia

INTERNATIONAL EDITORIAL ADVISORY BOARD
 
Y. Altintas - University of British Columbia , Vancouver, BC, Canada 
V. Astakhov – General Motors Business Unit of PSMi, MI, USA 
H. Attia - National Research Council of Canada, Montreal, QC, Canada 
C. D. Bouzakis - Aristoteles University of Thessaloniki, Greece 
E. Brinksmeier - University of Bremen, Bremen, Germany 
G. Byrne - University College Dublin, Dublin, Ireland 
T. H. C. Childs - University of Leeds, Leeds, United Kingdom 
B. Denkena - Technical University of Hannover, Hannover, Germany 
M. A. Elbestawi - McMaster University, Hamilton, ON,  Canada 
J. F. Gomes De Oliveira  -  Universidade de Sao Paulo, San Carlos, Brazil 
H. Hocheng - National Tsinghua University, China 
W. Hung - Texas A&M University, College Station, TX, USA 
F. Klocke - Fraunhofer Institut fur Produktionstechnologie, Germany 
P. Mathew - The University of New South Wales, Sydney, Australia 
K. P. Rajurkar -  University of Nebraska-Lincoln, USA 
M. Ramulu - University of Washington, USA