收稿范围 |
The International Journal of Solids and Structures has as its objective the publication and dissemination of original research in Mechanics of Solids and Structures as a field of Applied Science and Engineering. It fosters thus the exchange of ideas among workers in different parts of the world and also among workers who emphasize different aspects of the foundations and applications of the field.
Standing as it does at the cross-roads of Materials Science, Life Sciences, Mathematics, Physics and Engineering Design, the Mechanics of Solids and Structures is experiencing considerable growth as a result of recent technological advances. The Journal, by providing an international medium of communication, is encouraging this growth and is encompassing all aspects of the field from the more classical problems of structural analysis to mechanics of solids continually interacting with other media and including fracture, flow, wave propagation, heat transfer, thermal effects in solids, optimum design methods, model analysis, structural topology and numericaltechniques. Interest extends to both inorganic and organic solids and structures.
The emphasis is placed on contributions, analytical, experimental and numerical, which appear to be of permanent interest to research workers and engineers in the field. If furthering knowledge in the area of principal concern of the Journal, papers of primary interest to the constitutive disciplines of Materials Science, Mathematics, Physics and Engineering Design may be published. Papers which are merely illustrations of established principles and procedures, even though possibly containing new numerical or experimental data, will generally not be published.
When outstanding advances are made in existing areas or when new areas have been developed to a definitive stage, special review articles will be considered by the Editors.
No length limitations for contributions are set, but only concisely written papers are published. Brief articles are considered on the basis of technical merit. Discussions of previously published papers are welcome.
|
编辑信息 |
Editors Associate Editors S. ForestMaterials Research Centre, FranceC. M. LandisUniversity of Texas at Austin Department of Aerospace Engineering & Engineering Mechanics, United StatesD. MohrSwiss Federal Institute of Technology Department of Mechanical and Process Engineering, SwitzerlandAssistant Editor D. DiniImperial College London, London, United KingdomBoard of Editors R. AbeyaratneMassachusetts Institute of Technology, Cambridge, Massachusetts, United StatesE. ArrudaUniversity of Michigan, Ann Arbor, Michigan, United StatesF. BarlatPohang University of Science and Technology Graduate Institute of Ferrous Technology, Pohang, South KoreaR. BeckerUS Army Garrison Aberdeen Proving Ground, Aberdeen Proving Ground, Maryland, United StatesD. BigoniUniversity of Trento, Trento, ItalyH. ChaiTel Aviv University Iby and Aladar Fleischman Faculty of Engineering, Tel Aviv, IsraelM. ChoSeoul National University Department of Mechanical and Aerospace Engineering, Seoul, Korea, Republic ofA. CombescureNational Institute of Applied Sciences of Lyon, Villeurbanne, FranceR. S. ElliottUniversity of Minnesota, Minneapolis, Minnesota, United StatesN. A. FleckUniversity of Cambridge, Cambridge, United KingdomS. GovindjeeUniversity of California Berkeley, Berkeley, California, United StatesS. D. GuestUniversity of Cambridge, Cambridge, United KingdomY. HuangNorthwestern University, Evanston, Illinois, United StatesJ. HuberUniversity of Oxford, Oxford, United KingdomH. JensenAarhus University, Aarhus, DenmarkJ. W. KysarColumbia University, New York, New York, United StatesM. LiechtiUniversity of Texas at Austin, Austin, Texas, United StatesR. McMeekingUniversity of California Santa Barbara, Santa Barbara, California, United StatesS. NatsiavasAristotle University of Thessaloniki, Thessaloniki, GreeceC. F. NiordsonTechnical University of Denmark, Kongens(Kgs) Lyngby, DenmarkH. ObrechtTU Dortmund University, Dortmund, GermanyNobutada OhnoNagoya University, Nagoya, JapanM. PaggiIMT Institute for Advanced Studies, Lucca, ItalyG.H. PaulinoGeorgia Institute of Technology, Atlanta, Georgia, United StatesS. PellegrinoCalifornia Institute of Technology, Pasadena, California, United StatesT. J. PenceMichigan State University, East Lansing, Michigan, United StatesC. di PriscoPolytechnic University of Milan, Milano, ItalyA. Spagnoli, PhDUniversity of Parma Department of Civil Environmental Land and Architecture Engineering, Parma, ItalyD .J. SteigmannUniversity of California Berkeley, Berkeley, California, United StatesP. SteinmannFriedrich-Alexander University Erlangen-Nuremberg, Erlangen, GermanyQ.P. SunHong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong KongZ. SuoHarvard University John A Paulson School of Engineering and Applied Sciences, Cambridge, Massachusetts, United StatesP. SuquetLaboratory of Mechanics and Acoustics, Marseille, FranceY. TomitaKobe University, Kobe, JapanN. TriantafyllidisUniversity of Michigan, Ann Arbor, Michigan, United StatesQ. ZhengTsinghua University, Beijing, China
|