近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] 金士杰.Profile reconstruction and quantitative detection of planar defects with composite-mode total focusi[J],NDT & E INTERNATIONAL,2022,123
[2] 罗忠兵.Influences of mechanical contact on damage evaluation with electro-mechanical impedance technique[J],JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES,2022,12(12):12-18
[3] 罗忠兵.Gain-scale ultrasonic properties measurement of cast austenitic stainless steel[J],MEASUREMENT,2022,151
[4] 罗忠兵.Revisiting mechanisms to inhibit Ag3Sn plates in Sn-Ag-Cu solders with 1 wt.% Zn addition[J],JOURNAL OF ALLOYS AND COMPOUNDS,2022,500(1):39-45
[5] 苏慧敏.提高碳纤维增强树脂基复合材料弹性常数超声表征精度的方法[J],复合材料学报,2022,11:2510-2516
[6] 罗忠兵.定向凝固镍基合金DZ444声学特性的各向异性[J],材料工程,2022,47(4):120-126
[7] 林莉.Dijkstra's algorithm-based ray tracing method for total focusing method imaging of CFRP laminates[J],COMPOSITE STRUCTURES,2022,215:298-304
[8] 罗忠兵.Grain-scale Ultrasonic Properties Measurement of Cast Austenitic Stainless Steel[J],MEASUREMENT,2022,151:107231-
[9] 罗忠兵.Influences of mechanical contact on damage evaluation with electromechanical impedance technique[J],JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES,2022,25(3):321-331
[10] 林莉.Total focusing method imaging of multidirectional CFRP laminate with model-based time delay correc[J],NDT E INTERNATIONAL,2022,97:51-58
[11] 罗忠兵.Combined quantitative evaluation on early-stage fatigue damage of coarse-grained austenite stainle[J],ULTRASONICS,2022,103:106090
[12] 罗忠兵.纯铁低周疲劳表面/亚表面损伤临界折射纵波评价[J],材料保护,2022,52(9):67-71
[13] 罗忠兵.航空复材构件R区相控阵超声检测研究进展[J],航空制造技术,2022,62(14):67-75
[14] Chen, Yao.Modeling of ultrasonic propagation in heavy-walled centrifugally cast austenitic Stainless steel b[J],ULTRASONICS,2022,59:31-39
[15] 罗忠兵.铸造奥氏体不锈钢中铁素体与奥氏体位向关系及其对声衰减的影响[J],物理学报,2022,67(23):233-241
[16] 陈尧.厚壁粗晶铸造奥氏体不锈钢相位相干成像模拟[J],无损探伤,2022,03:14-17
[17] 陈尧.基于EBSD技术构建弹性各向异性粗晶材料超声仿真模型的研究[J],机械工程学报,2022,18:24-30
[18] 金士杰.Quantitative detection of shallow subsurface cracks in pipeline with Time-of-Flight diffraction tech[J],NDT & E International,2021,118:102397-
[19] 金士杰.Profile reconstruction and quantitative detection of planar defects with composite-mode total focusi[J],NDT & E International,2021,123:102518-
[20] 史思琪.Resolution Enhancement of Ultrasonic Imaging at Oblique Incidence by using WTFM based on FMC-AR[J],Measurement,2021,183:109798-
[21] 马志远.Ultrasonic characterization of thermal barrier coatings porosity through BP neural network optimizin[J],Ultrasonics,2021,100:105981-105981
[22] 罗忠兵.Numerical modeling of ultrasonic wave propagation in CFRP radii[A],2021,38:45031-
[23] 林莉.Characterization and Optimization of Acoustic Field for Curved Array Probe[J],ACOUSTICAL PHYSICS,2021,66(5):469-476
[24] Jin, Shi-jie,Liu, Chen-fei,Shi, Si-qi,Luo, Zhong-bing,Wang, Chu,Lin, Li.Comparison of Morphology Characterization for Regular Cracks with Multi-mode Total Focusing Method[A],2019,21-25
[25] Luo, Zhongbing,Wang, Xinyu,Ma, Zhiyuan,Zou, Longjiang,Zhu, Xiaolei,Lin, Li.Combined quantitative evaluation on early-stage fatigue damage of coarse-grained austenite stainle[J],ULTRASONICS,2020,103:106090
[26] 罗忠兵,曹欢庆,林莉.航空复材构件R区相控阵超声检测研究进展[J],航空制造技术,2019,62(14):67-75
[27] 罗忠兵,张嘉宁,金士杰,林莉.定向凝固镍基合金DZ444声学特性的各向异性[J],材料工程,2019,47(4):120-126
[28] 罗忠兵,董慧君,马志远,邹龙江,朱效磊,林莉.铸造奥氏体不锈钢中铁素体与奥氏体位向关系及其对声衰减的影响[J],物理学报,2018,67(23):233-241
[29] 陈军,刘国彩,林莉,罗忠兵.铁素体不锈钢晶粒度的非线性超声表征[J],无损检测,2018,40(7):15-18,81
[30] Ma, Z. Y.,Zhang, W.,Luo, Z. B.,Lin, L.,Krishnaswamy, S..Thickness determination of dual-layer coatings based on ultrasonic spectral filtering[J],INSIGHT,2018,60(4):200-205
[31] 罗忠兵,李飞龙,曹欢庆,金士杰,林莉.Focal Law Optimization and Acoustic Field Simulation of PAUT on CFRP Radii[A],2018
[32] 丁珊珊,金士杰,何晓晨,罗忠兵,林莉.基于仿真方法的CFRP复合材料孔隙率与超声衰减系数的关系[J],复合材料学报,2018,35(1):89-94
[33] Ding, S. S.,Jin, S. J.,Luo, Z. B.,Lin, L.,Chen, J..Researches on the Ultrasonic Scattering Attenuation of Carbon Fibre Reinforced Plastics with 2D Re[J],ACOUSTICAL PHYSICS,2017,63(4):490-495
[34] 陈军,杨孟哲,林莉,罗忠兵.珠光体组织转变的非线性超声表征[J],无损检测,2017,39(2):1-4
[35] 金士杰,罗忠兵.Research on TFM imaging of Main pipe weld of Compound steel based on FMC/SMC[A],2017
[36] 金士杰,罗忠兵,陈军,林莉.Researches on the ultrasonic scattering attenuation of CFRP with 2D real morphology void model[J],Acoustical Physics,2017,63(4):490-495
[37] 苏慧敏,罗忠兵,曹欢庆,周伯堃,林莉.提高碳纤维增强树脂基复合材料弹性常数超声表征精度的方法[J],复合材料学报,2016,33(11):2510-2516
[38] 陈尧,罗忠兵,张东辉,周全,刘丽丽,杨会敏,林莉.基于EBSD技术构建弹性各向异性粗晶材料超声仿真模型的研究[J],机械工程学报,2016,52(18):24-30
[39] 陈尧,罗忠兵,金士杰,张东辉,郭彦辉,房云龙,杨会敏,林莉.厚壁粗晶铸造奥氏体不锈钢相位相干成像模拟[J],无损探伤,2016,03:14-17
[40] 康达,房云龙,张树潇,金士杰,刘丽丽,张侃,张东辉,杨会敏,林莉,罗忠兵.基于几何方法的焊缝倾斜裂纹TOFD定量检测[J],无损检测,2016,38(4):1-5,48
京公网安备 11010802027423号