宋刚 - 大连理工大学 - 材料科学与工程学院

个人简介

教育经历 1994.91997.6 辽宁省新民市高级中学无 2001.92006.10 大连理工大学材料加工博士 1997.92001.7 沈阳工业大学焊接学士工作经历 2006.11至今大连理工大学

研究领域

激光诱导电弧复合焊接机理及形性控制机制大型构件焊接过程在线检测与智能调控技术中厚板全位置智能化焊接技术及控制系统开发高强铝合金焊接接头强塑性协同提升机理及方法镁合金及其与异质材料高强韧界面设计与调控激光诱导电弧复合焊接智能调控系统及装备

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

[1]宋刚.Research on joining mechanism of Mg alloy/steel butt joints with Cu-Zn interlayer by hybrid laser...[J],钢铁研究学报,2022,25:221-227 [2]Cheng, Jiwen.Review of techniques for improvement of softening behavior of age-hardening aluminum alloy welded...[J],Materials,2022,14(19) [3]宋刚.Simulation and Analysis of Magnesium Alloy/Steel by Laser-Induced Arc Hybrid Welding[J],CHINESE JOURNAL OF LASERS-ZHONGGUO JIGUANG,2022,47(6) [4]Hao, Xinfeng.Spectral Analysis of the Plasma in Low-Power Laser/Arc Hybrid Welding of Magnesium Alloy[J],IEEE TRANSACTIONS ON PLASMA SCIENCE,2022,37(1):76-82 [5]宋刚.Study of the characteristic of droplet transfer in laser-MIG hybrid welding based on the phase ma...[A],Proceedings of the International Conference on Computational Methods,2022,2:679-686 [6]宋刚.Study on ac-PMIG welding of AZ(31)B magnesium alloy[J],SCIENCE AND TECHNOLOGY OF WELDING AND JOINING,2022,15(3):219-225 [7]宋刚.Study on butt fusion welding characteristics of AZ31B magnesium alloy to steel by hybrid laser-TI...[J],Hanjie Xuebao/Transactions of the China Welding Institution,2022,36(1):43-46 [8]刘黎明.Study on corrosion resistance properties of hydrothermal sealed arc sprayed aluminium coating[J],SURFACE ENGINEERING,2022,26(6):399-406 [9]Shi, Jipeng.Study on weld formation and its mechanism in laser-TIG hybrid welding with filler wire of a tit...[J],JOURNAL OF LASER APPLICATIONS,2022,30(3) [10]徐荣正.铝合金表面电弧喷涂铝涂层工艺与性能[J],焊接学报,2022,6:109-112 [11]依龙.钛合金激光-电弧复合热源焊接工艺[J],焊接,2011,2:48-51 [12]王鹏.铝合金激光-电弧复合增材制造工艺分析[J],焊接技术,2016,10:10-13 [13]王真.铝合金电弧喷涂铝涂层导电封孔工艺研究[A],2008轻金属与高强材料焊接国际论坛,2008,211-215 [14]宋刚.铝-镁金属间化合物涂层的制备与分析[J],焊接学报,2011,6:9-12 [15]张兆栋.铸造镁合金A-TIG补焊工艺分析[J],焊接学报,2017,3:87-90 [16]王鹏.镁合金MIG焊接工艺及焊接接头组织性能分析[J],焊接学报,2009,12:109-112 [17]宋刚.镁合金与钢异质材料焊接的研究进展[J],Jixie Gongcheng Xuebao/Journal of Mechanical Engineering,2020,56(8):1-12 [18]宋刚.镁合金与钢的激光-TIG复合热源斜对接焊[A],2011年全国计算机辅助焊接工程学术研讨会,2011,115-119 [19]刘黎明.镁合金激光胶接焊接头微观及力学性能[J],中国机械工程,2007,3:352-356 [20]宋刚.镁合金焊接技术探索[A],海峡两岸及香港镁合金应用研讨会及广东省铸造压铸新技术交流会,2004,39-42