近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1]卢晓红.Prediction of three-dimensional coordinate measurement of space points based on BP neural network[J],International Journal of Manufacturing Research,2021,15(3):218-233
[2]贾振元.Stability of micro-milling thin-walled part process[J],International Journal of Advanced Manufacturing Technology,2021,112(5-6):1529-1544
[3]卢晓红,刘海波,刘阔,任宗金,江一波.新工科机电课程项目引导式改革必要性及改革方向[J],教育教学论坛,2019,46:96-98
[4]Lu, Xiaohong,Wang, FuRui,Xue, Liang,Feng, Yixuan,Liang, Steven Y..Investigation of material removal rate and surface roughness using multi-objective optimization...[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2019,71(6):787-794
[5]Lu, Xiaohong,Jia, Zhenyuan,Wang, Xinxin,Liu, Yubo,Liu, Mingyang,Feng, Yixuan,Liang, Steven Y..Measurement and prediction of vibration displacement in micro-milling of nickel-based superallo...[J],MEASUREMENT,2019,145:254-263
[6]Jia Zhenyuan,Wang Xinxin,Lu Xiaohong,Ren Zongjin.Research on Vibration Measurement System for Micro-milling Machine[J],INTERNATIONAL JOURNAL OF ACOUSTICS AND VIBRATION,2018,23(4):454-460
[7]Feng, Yixuan,Hung, Tsung-Pin,Lu, Yu-Ting,Lin, Yu-Fu,Hsu, Fu-Chuan,Lin, Chiu-Feng,Lu, Ying-Cheng,Lu, Xiaohong,Liang, Steven Y..Inverse Analysis of Inconel 718 Laser-Assisted Milling to Achieve Machined Surface Roughness[J],INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING,2018,19(11):1611-1618
[8]Lu, Xiaohong,Jia, Zhenyuan,Yang, Kun,Shao, Peilin,Ruan, Feixiang,Feng, Yixuan,Liang, Steven Y..Analytical model of work hardening and simulation of the distribution of hardening in micro-mil...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,97(9-12):3915-3923
[9]Lu, Xiaohong,Zhang, Haixing,Jia, Zhenyuan,Feng, Yixuan,Liang, Steven Y..Cutting parameters optimization for MRR under the constraints of surface roughness and cutter b...[J],JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY,2018,32(7):3379-3388
[10]Lu, Xiaohong,Zhang, Haixing,Jia, Zhenyuan,Feng, Yixuan,Liang, Steven Y..Floor surface roughness model considering tool vibration in the process of micro-milling[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(9-12,SI):4415-4425
[11]Lu, Xiaohong,Hu, Xiaochen,Jia, Zhenyuan,Liu, Mingyang,Gao, Song,Qu, Chenglin,Liang, Steven Y..Model for the prediction of 3D surface topography and surface roughness in micro-milling Incone...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2018,94(5-8):2043-2056
[12]卢晓红,贾振元.Strain hardening properties and the relationship between strain and hardness of Inconel 718[J],International Journal of Manufacturing Research,2018,13(4):330-341
[13]卢晓红,贾振元.Effects of cutting parameters on temperature and temperature prediction in micro-milling of Incon...[J],International Journal of Nanomanufacturing,2018,14(4):377-386
[14]卢晓红,司立坤.The process flow optimisation of crankshaft machining considering production logistics[J],International Journal of Industrial and Systems Engineering,2018,30(2):125-137
[15]Lu, Xiaohong,Wang, Furui,Li, Guangjun,Si, Likun,Gao, Lusi,Jia, Zhenyuan.Model of the instantaneous undeformed chip thickness in micro-milling based on tooth trajectory[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2018,232(2):226-239
[16]Wang, Shasha,Jia, Zhenyuan,Lu, Xiaohong,Zhang, Haixing,Zhang, Chi,Liang, Steven Y..Simultaneous optimization of fixture and cutting parameters of thin-walled workpieces based on ...[J],SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL,2018,94(1):67-76
[17]卢晓红.The influence factors and prediction of curve surface roughness in micro-milling nickelbased supe...[A],ASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 2018,2018,4
[18]Lu, Xiaohong,Wang, Xinxin,Sun, Jing,Zhang, Hong,Feng, Yixuan.The influence factors and prediction of curve surface roughness in micro-milling nickel-based s...[A],2018
[19]Feng, Yixuan,Pan, Zhipeng,Lu, Xiaohong,Liang, Steven Y..ANALYTICAL AND NUMERICAL PREDICTIONS OF MACHINING-INDUCED RESIDUAL STRESS IN MILLING OF INCONEL...[A],2018
[20]Lu, Xiaohong,Wang, FuRui,Jia, Zhenyuan,Liang, Steven Y..The flank wear prediction in micro-milling Inconel 718[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2018,70(8):1374-1380
[21]Lu, Xiaohong,Jia, Zhenyuan,Feng, Yixuan,Liang, Steven Y.,Lu, Yanjun.Predicting the surface hardness of micro-milled nickel-base superalloy Inconel 718[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,93(1-4):1283-1292
[22]Lu, Xiaohong,Wang, Furui,Jia, Zhenyuan,Si, Likun,Zhang, Chi,Liang, Steven Y..A modified analytical cutting force prediction model under the tool flank wear effect in micro-...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2017,91(9-12):3709-3716
[23]Lu Xiaohong,Jia Zhenyuan,Zhang Haixing,Liu Shengqian,Feng Yixuan,Liang, Steven Y..Tool Point Frequency Response Prediction for Micromilling by Receptance Coupling Substructure A...[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(7)
[24]Lu, Xiaohong,Zhang, Haixing,Jia, Zhenyuan,Feng, Yixuan,Liang, Steven Y..A New Method for the Prediction of Micro-milling Tool Breakage[A],2017,1
[25]Lu, Xiaohong,Wang, Hua,Jia, Zhenyuan,Si, Likun,Liang, Steven Y..Effects of tool nose corner radius & main cutting-edge radius on cutting temperature in micro-mil...[A],2017,1
[26]Yang, Xiaolong,Song, Jinlong,Zheng, Huanxi,Deng, Xu,Liu, Xin,Lu, Xiaohong,Sun, Jing,Zhao, Danyang.Anisotropic sliding on dual-rail hydrophilic tracks[J],LAB ON A CHIP,2017,17(6):1041-1050
[27]卢晓红,刘冲,宋满仓,段春争.机械工程领域全日制工程硕士研究生《机械工程标准体系》课程的构建[J],教育教学论坛,2017,3:180-182
[28]卢晓红,贾振元.Tool Point Frequency Response Prediction for Micro-milling by RCSA[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME,2017,139(7):1-13
[29]卢晓红,高路斯.Inconel718微铣削加工表面残余应力有限元仿真[J],东北大学学报,2017,38(2):12-12
[30]卢晓红,贾振元. Double PSDs based Measurement System of Trajectory Tracking of a Moving Target[J],Engineering Computations,2017,34(3):781-799
[31]Lu, Xiaohong,Wang, Hua,Hu, Xiaochen,Li, Guangjun,Si, Likun,Jia, Zhenyuan.Measurement-based modelling of cutting forces in micro-milling of Inconel 718[J],International Journal of Nanomanufacturing,2017,13(1):1-11
[32]Lu X.,Wang F.,Wang X.,Lu Y.,Si L..A surface roughness prediction model using response surface methodology in micro-milling Inconel ...[J],International Journal of Machining and Machinability of Materials,2017,19(3):230-245
[33]卢晓红,刘冲,宋满仓,段春争.机械工程领域全日制工程硕士研究生《机械工程标准体系》课程的构建—以大连理工大学为例[J],教育教学论坛,2017,3:180-183
[34]Xiaohong, Lu,Zhenyuan, Jia,Xiaochen, Hu,Shasha, Wang,Likun, Si.Design of Double PSDs mounting plate on the tracing measurement system[J],JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING,2017,11(1):1-10
[35]Lu, Xiaohong,Jia, Zhenyuan,Hu, Xiaochen,Wang, Wentao.Double position sensitive detectors (PSDs) based measurement system of trajectory tracking of a...[J],ENGINEERING COMPUTATIONS,2017,34(3):781-799
[36]Lu, Xiaohong,Weng, Yongqiang,Si, Likun,Jia, Zhenyuan,Wang, FuRui.Influence of feed per tooth on tool wear based on 3D finite element simulation in micro-milling...[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2017,69(4):585-590
[37]卢晓红,王华,路彦君,司立坤,高路斯,曲成林.切削加工表面机械性能研究现状[J],大连交通大学学报,2016,37(6):15-20
[38]Yang, Xiaolong,Liu, Xin,Song, Jinlong,Sun, Jing,Lu, Xiaohong,Huang, Shuai,Chen, Faze,Xu, Wenji.Patterning of water traps using close-loop hydrophilic micro grooves[J],APPLIED SURFACE SCIENCE,2016,389:447-454
[39]Lu, XiaoHong,Jia, Zhenyuan,Wang, Hua,Wang, XinXin,Si, LiKun,Gao, Lusi.Stability analysis for micro-milling nickel-based superalloy process[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2016,86(9-12):2503-2515
[40]卢晓红,路彦君,王福瑞,高路斯,王振宇,刘永云.镍基高温合金Inconel718微铣削加工硬化研究[J],组合机床与自动化加工技术,2016,7:4-7
[41]Lu, Xiaohong,Hu, Xiaochen,Wang, Hua,Si, Likun,Liu, Yongyun,Gao, Lusi.Research on the prediction model of micro-milling surface roughness of Inconel718 based on SVM[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2016,68(2):206-211
[42]Lu, Xiaohong,Jia, Zhenyuan,Wang, Hua,Si, Likun,Liu, Yongyun,Wu, Wenyi.Tool wear appearance and failure mechanism of coated carbide tools in micro-milling of Inconel ...[J],INDUSTRIAL LUBRICATION AND TRIBOLOGY,2016,68(2):267-277
[43]卢晓红,王殿龙,陈星,任宗金.机械专业"自动控制系统"教学体系改革研究[J],教育教学论坛,2016,3:84-85
[44]卢晓红,王凤晨,王华,司立坤,王鑫鑫.铣削过程颤振稳定性分析的研究进展[J],振动与冲击,2016,35(1):74-82
[45]Lu, Xiaohong,Lu, Yanjun,Wang, Furui,Zhao, Chunyu,Gao, Lusi,Si, Likun.Research on surface residual stress of micro-milling nickel-based superalloy Inconel 718[J],International Journal of Nanomanufacturing,2016,12(1):82-92
[46]卢晓红,路彦君,王福瑞,赵春宇,高路斯,司立坤.Research on Research on surface residual stress of micro-milling nickel-based superalloy Inconel ...[J],International Journal of Nanomanufacturing,2016,12(1):82-92
[47]Lu, Xiaohong,Jia, Zhenyuan,Wang, Hua,Si, Likun,Wang, Xinxin,Jia.Surface roughness prediction model of micro-milling Inconel 718 with consideration of tool wear[J],International Journal of Nanomanufacturing,2016,12(1):93-108
[48]Lu, Xiaohong,Jia, Zhenyuan,Wang, Xinxin,Li, Guangjun,Ren, Zongjin.Three-dimensional dynamic cutting forces prediction model during micro-milling nickel-based sup...[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,81(9-12):2067-2086
[49]卢晓红,王福瑞,王鑫鑫,司立坤,高路斯,刘永云.基于碳排放定量分析的低能耗切削加工研究进展[J],组合机床与自动化加工技术,2015,10:1-4
[50]卢晓红,王文韬,司立坤,韩鹏卓,任宗金.基于双PSD的机械手运动轨迹跟踪测量装置[J],制造技术与机床,2015,6:61-66
[51]卢晓红,武文毅,王文韬,裴兴林,路彦君,司立坤.镍基高温合金Inconel718微铣削毛刺试验研究?[J],组合机床与自动化加工技术,2015,1:1-3
[52]Wang X.,Lu X.,Jia Z.,Wang W.,Wang F..Control system for micro milling machine[J],International Journal of Industrial and Systems Engineering,2015,21(1):83-98
[53]Wang, Xinxin,Wu, Wenyi,Lu, Xiaohong,Jia, Zhenyuan,Li, Guangjun.The application of micro-milling technology in the processing of micro-strip antenna[J],INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY,2015,51(1):44-59
[54]卢晓红,王福吉,陈星.兴趣导向的《微机原理与控制技术》课程教学改革探讨[J],教育教学论坛,2014,53:128-129
[55]Yao, Baozhen,Hu, Ping,Lu, Xiaohong,Gao, Junjie,Zhang, Mingheng.Transit network design based on travel time reliability[J],TRANSPORTATION RESEARCH PART C-EMERGING TECHNOLOGIES,2014,43(,SI):233-248
[56]卢晓红.The finite element analysis of the stress and deformation of the micro-milling cutter based on AN...[A],2014,494(495):345-348
[57]贾振元,卢晓红,任宗金.Design and dynamic deformation analysis for elastic cutter fixture of tool grasper mechanism on d...[A],2014,494(495):341-344
[58]卢晓红,贾振元,任宗金,司立坤.Reliability Oriented Performance Testing System of Chain-type Magazine and ATC[J],Sensors & Transducers,2014,177(8):113-121
[59]Jia, Z.Y.,Zou, J.,Lu, X.H.,Ren, Z.J..Design and dynamic deformation analysis for elastic cutter fixture of tool grasper mechanism on d...[J],Applied Mechanics and Materials,2013,494-495:341-344
[60]Lu, Xiaohong,Jia, Zhenyuan,Gao, Shengnan,Han, Pengzhuo.Failure mode effects and criticality analysis (FMECA) of circular tool magazine and ATC[J],Journal of Failure Analysis and Prevention,2013,13(2):207-216
京公网安备 11010802027423号