近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Zhang, Yang,Jia, Zhenyuan,Yang, Fan,Wang, Wenqi,Lu, Yongkang,Wang, Fuji,Liu, Wei.Improved separated-parameter calibration method for binocular vision measurements with a large fie[J],OPTICS EXPRESS,2020,28(3):2956-2974
Zhou, Mengde,Liu, Wei,Yao, Zhuang,Wen, Zhengquan,Tang, Linlin,Liang, Bing,Li, Xiao,Jia, Zhenyuan.Active Vibration Suppression of the Cantilever Sting for Wind Tunnel Models with Piezoelectric Con[A],2019,2019-July:1323-1328
Liang, Bing,Liu, Wei,Jiang, Xintong,Feng, Di,Liu, Kun,Zhou, Mengde,Li, Xiao,Jia, Zhenyuan.A Novel Automatic Calibration Method for Displacement Sensors Based on the Spatial Transformation [A],2019,2019-July:1244-1249
刘巍,李肖,李辉,潘翼,贾振元.基于双目视觉的数控机床动态轮廓误差三维测量方法[J],机械工程学报,2019,55(10):1-9
姜雨丰,温正权,姚壮,刘巍.基于视觉的风洞支杆主动抑振方法[J],新技术新工艺,2019,6:67-70
李辉,刘巍,张洋,张仁伟,周志龙,贾振元.激光跟踪仪多基站转站精度模型与误差补偿[J],光学精密工程,2019,27(4):771-783
Li Xiao,Liu Wei,Pan Yi,Ma Jianwei,Wang Fuji.A Knowledge-Driven Approach for 3D High Temporal-Spatial Measurement of an Arbitrary Contouring Erro[J],Sensors (Basel, Switzerland),2019,19(3)
Jia, Zhenyuan,Jin, Lei,Liu, Wei,Ren, Zongjin.Influence of sheet roughness on the sensitivity of piezoelectric force sensors[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2019,233(1):243-250
Li, Xiao,Liu, Wei,Pan, Yi,Liang, Bing,Zhou, Mengde,Li, Hui,Wang, Fuji,Jia, Zhenyuan.Monocular-vision-based contouring error detection and compensation for CNC machine tools[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2019,55:447-463
Wang, Fuji,Yin, Junwei,Jia, Zhenyuan,Niu, Bin,Liu, Wei.A novel approach to evaluate the delamination extent after edge trimming of carbon-fiber-reinforce[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2018,232(14):2523-2532
Liu, Wei,Ma, Xin,Li, Xiao,Pan, Yi,Wang, Fuji,Jia, Zhenyuan.A Novel Vision-Based Pose Measurement Method Considering the Refraction of Light[J],SENSORS,2018,18(12)
刘昱,王世红,袁晓晶,刘巍.风洞模型振动抑制技术研究[J],测控技术,2018,S2:201-203
张家昆,姜雨丰,鲁继文,贾振元,刘昱,刘巍,刘惟肖.基于时滞LQR算法的风洞模型振动控制试验研究[J],新技术新工艺,2018,9:32-37
Liu, Wei,Feng, Di,Zhou, Mengde,Li, Xiao,Jiang, Xintong,Jia, Zhenyuan,Liang, Bing.High-Accuracy Calibration Based on Linearity Adjustment for Eddy Current Displacement Sensor[J],SENSORS,2018,18(9)
鲁继文,刘巍,刘昱,贾振元,刘惟肖,张家昆,姜雨丰.风洞模型支杆系统设计及振动主动控制[J],计测技术,2018,38(4):10-16
刘惟肖,贾振元,刘昱,刘巍,姜雨丰,鲁继文,张家昆.一种基于模糊自适应的速度反馈主动抑振方法[J],新技术新工艺,2018,8:31-35
张致远,刘巍,张洋,逯永康,邸宏图,叶帆,贾振元.基于非度量校正的大视场图像匹配参数标定法[J],光学学报,2018,08:68-75
李士杰,刘巍,杨景豪,刘阳,贾振元.基于三目极线约束的高精度基础矩阵求解方法[J],中国科技信息,2018,12:114-116
刘巍,严洪悦,李肖,李辉,马建伟.机床动态检测中的高速图像运动去模糊还原[J],仪器仪表学报,2018,39(05):224-232
司立坤,马建伟,王福吉,刘巍.慕课在实验室管理中的应用探索[J],实验室科学,2018,21(2):180-182
Yang, Jinghao,Liu, Wei,Zhang, Renwei,Jia, Zhenyuan,Wang, Fuji,Li, Shijie.A method for measuring the thermal geometric parameters of large hot rectangular forgings based on[J],MACHINE VISION AND APPLICATIONS,2018,29(3):467-476
兰志广,张洋,张致远,李汝鹏,刘巍,邢宏文.基于柔性控制点的三维数据拼接方法[J],计测技术,2018,38(1):32-37
Liu, Wei,Lan, Zhiguang,Zhang, Yang,Zhang, Zhiyuan,Zhao, Haiyang,Ye, Fan,Li, Xiaodong.Global Data Registration Technology Based on Dynamic Coded Points[J],IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT,2018,67(2):394-405
Zhang Yang,Zhao Haiyang,Liu Wei,Zhang Zhiyuan,Di Hongtu,Liang Bing,Xing Hongwen,Jia Zhenyuan.High-precision binocular measuring method considering three-dimensional distortion[A],2018,10710
Ye, Fan,Zhang, Yang,Liu, Wei,Gao, Peng,Zhao, Haiyang,Lan, ZhiGuang,Yang, Fan,Jia, Zhenyuan.Profile Measurement Method of Aviation Part Based on Step Boundary Model[A],2018,10806
Liu, Wei,Ma, Xin,Chen, Ling,Jia, Zhenyuan,Liu, Weixiao,Li, Xiao,Zhang, Jiakun,Lu, Jiwen.Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel[J],CHINESE JOURNAL OF AERONAUTICS,2018,31(1):89-98
Liu, Wei,Li, Xiao,Jia, Zhenyuan,Li, Hui,Ma, Xin,Yan, Hongyue,Ma, Jianwei.Binocular-vision-based error detection system and identification method for PIGEs of rotary axis i[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2018,51:208-222
Tian, Yu,Zhang, Jun,Ren, Zong-jin,Liu, Wei,Jia, Zhenyuan,Qi, Yazhou.A novel piezoelectric dynamometer based on double-sensor for thermal compensation[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2017,231(23):4479-4491
徐鹏涛,刘阳,贾振元,樊超楠,刘巍.激光器阵列调节装置及其控制系统设计[J],中南大学学报（自然科学版）,2017,48(11):2918-2925
刘巍,张洋,高鹏,杨帆,兰志广,李晓东,贾振元,高航.结合分层处理的激光光条亚像素中心提取方法[J],红外与激光工程,2017,46(10):225-232
Liu, Wei,Li, Xiao,Jia, Zhenyuan,Yan, Hongyue,Ma, Xin.A three-dimensional triangular vision-based contouring error detection system and method for machi[J],PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY,2017,50:85-98
叶帆,张洋,兰志广,李汝鹏,刘巍,邢宏文,葛恩德,王福吉.基于曲率自适应的航空零件法矢量测量研究[J],计测技术,2017,37(4):13-19
丁立超,刘巍,高鹏,贾振元.应用显微视觉的跨尺度几何参数测量方法[J],机械设计与制造,2017,7:9-13
赵海洋,张洋,兰志广,李汝鹏,刘巍,肖睿恒,贾振元,邢宏文.基于点云三维重构的配合面装配间隙分析方法研究[J],计测技术,2017,37(3):20-23
Zhang, Yang,Yang, Fan,Liu, Wei,Zhang, Zhiyuan,Zhao, Haiyang,Lan, Zhiguang,Gao, Peng,Jia, Zhenyuan.An Improved Measurement Method for Large Aviation Part based on Spatial Constraint Calibration and[A],2017,10420
刘巍,高鹏,张洋,杨帆,李晓东,兰志广,贾振元,高航.面向大型零部件的三维形面高精度测量方法[J],红外与激光工程,2017,46(3):244-252
Liu Wei,Ma Xin,Jia Zhenyuan,Lu Wenbo,Wang Zhengqu,Chen Ling,Liu Weixiao,Lu Jiwen.An experimental system for release simulation of internal stores in a supersonic wind tunnel[J],CHINESE JOURNAL OF AERONAUTICS,2017,30(1):186-195
王一奇,刘学术,鲍永杰,刘巍,高航.The Development of Bearing Response on the Single-lap Bolted Composite Joints by Shimming Method[A],2017
Liu, Wei,Zhang, Yang,Yang, Fan,Gao, Peng,Lan, Zhiguang,Jia, Zhenyuan,Gao, Hang.A Measurement Method for Large Parts Combining with Feature Compression Extraction and Directed Ed[J],SENSORS,2017,17(1)
Wei Liu,Ma Xin,Liang Bing,Yang Zaihua,Yi Wangmin,Long Changyu,Jia Zhenyuan.A monocular vision 3D measurement method based on rotating lens[A],2017,1717-1721
Zhang, Yang,Liu, Wei,Lan, Zhiguang,Zhang, Zhiyuan,Ye, Fan,Zhao, Haiyang,Li, Xiaodong,Jia, Zhenyuan.Global Measurement Method for Large-Scale Components Based on a Multiple Field of View Combination[J],JOURNAL OF SENSORS,2017,2017
樊超楠,刘阳,王灵丽,贾振元,刘巍.激光辅助的大型回转类零件直径实时测量方法[J],红外与激光工程,2016,45(11):106-112
刘巍,王亮,樊超楠,杨景豪,徐鹏涛,贾振元.大型高温锻件在线视觉测量图像匹配方法[J],激光与红外,2016,46(11):1414-1418
金雷,贾振元,刘巍.压电力传感器晶片与电极接触刚度影响研究[J],机械工程学报,2016,52(22):15-23,30
Yang, Jinghao,Jia, Zhenyuan,Liu, Wei,Fan, Chaonan,Xu, Pengtao,Wang, Fuji,Liu, Yang.Precision calibration method for binocular vision measurement systems based on arbitrary translati[J],MEASUREMENT SCIENCE AND TECHNOLOGY,2016,27(10)
钱宝伟,刘巍,贾振元,何春伶,付饶,白玉.双顶角钻头钻削CFRP复合材料的刀具磨损机制[J],复合材料学报,2016,34(4):749-757
Liu, Wei,Wang, Liang,Jia, Zhenyuan,Fan, Chaonan,Yang, Jinghao,Xu, Pengtao,Wang, Lingli,Liu, Yang.A suppression method of image noise for cylindrical objects based on vision sensors[J],SENSORS AND ACTUATORS A-PHYSICAL,2016,247:403-414
刘巍,李肖,马鑫,贾振元,陈玲,刘惟肖.采用复合式靶标的近景大视场相机标定方法[J],红外与激光工程,2016,45(7):0717005-1-0717005-7
贾振元,樊超楠,刘巍,杨景豪,徐鹏涛.双目视觉测量中等匹配点的光条中心提取[J],光学精密工程,2016,24(7):1582-1591
Jia, Zhenyuan,Jin, Lei,Liu, Wei,Ren, Zongjin.A Novel Strategy to Eliminate the Influence of Water Adsorption on Quartz Surfaces on Piezoelectri[J],SENSORS,2016,16(7)
李晓东,刘巍,杨帆,张洋,高鹏,贾振元.视觉测量中动态编码点的设计与检测[J],计测技术,2016,36(3):5-9
Fu, Rao,Jia, Zhenyuan,Wang, Fuji,Su, Youliang,Yin, Junwei,Niu, Bin,Liu, Wei.Design of a new tool with intermittent-sawtooth structure for damage reduction in drilling of CFRP c[A],2016
Su, Youliang,Wang, Fuji,Jia, Zhenyuan,Yin, Junwei,Fu, Rao,Niu, Bin,Liu, Wei.Effect of the ratio of cutting depth to edge diameter on chip formation mechanism in machining of CF[A],2016
Liu, Yang,Liu, Wei,Wang, Lingli,Xu, Pengtao,Fan, Chaonan,Ding, Lichao,Jia, Zhenyuan.An Improved Measurement Method of Large Hot Forgings Based on Laser-aided Multi-view Stereo Vision[A],2016,2016-November:890-894
Yang, Jinghao,Liu, Wei,Fan, Chaonan,Li, Shijie,Wang, Fuji,Jia, Zhenyuan,Yan, Hongyue,Li, Xiao.Improved calibration method of binocular vision measurement system for large hot forging[A],2016,2016-November:918-922
Liu, Wei,Jia, Zhenyuan,Yang, Jinghao,Chen, Ling,Ma, Xin.A monocular vision 3D measurement method based on refraction of light[A],2016,2016-November:880-884
Ma Xin,Liu Wei,Chen Ling,Li Xiao,Jia Zhenyuan,Shang Zhiliang.Simulative technology for auxiliary fuel tank separation in a wind tunnel[J],CHINESE JOURNAL OF AERONAUTICS,2016,29(3):608-616
Ma, Xin,Yi Wangmin,Liu, Wei,Chen, Ling,Lu, Jiwen,Liu, Weixiao,Zhang, Jiakun,Jia, Zhenyuan,Long Changyu,Yang Zaihua.A Photogrammetry Pose Measurement Method for Moving Targets in a Wind Tunnel[A],2016,2016-July:529-533
Fan, Chaonan,Liu, Wei,Xu, Pengtao,Liu, Yang,Yang, Jinghao,Wang, Lingli,Jia, Zhenyuan.Image Processing in Dimensional Measurement for Hot Large Forgings Based on Laser-aided Binocular [A],2016,10033
刘阳,刘巍,徐鹏涛,王灵丽,贾振元.基于纯平移两视图几何的镜头畸变参数标定[J],光学精密工程,2016,24(4):922-929
Zhao, Kai,Jia, Zhenyuan,Liu, Wei,Ma, Jianwei,Ding, Lichao.Burr Control for Removal of Metal Coating from Plastics Substrate by Micro-Milling[J],MATERIALS AND MANUFACTURING PROCESSES,2016,31(5):641-647
刘巍,陈玲,马鑫,李肖,贾振元.基于彩色图像的高速目标单目位姿测量方法[J],仪器仪表学报,2016,37(3):675-682
杨景豪,贾振元,刘巍,刘阳,王福吉.双目立体视觉测量系统的标定[J],光学精密工程,2016,24(2):300-308
Liu, Yang,Fan, Chaonan,Xu, Pengtao,Yang, Jinghao,Zhao, Kai,Jia, Zhenyuan,Liu, Wei,Wang, Lingli.An improved image acquisition method for measuring hot forgings using machine vision[J],SENSORS AND ACTUATORS A-PHYSICAL,2016,238:369-378
贾振元,赵凯,刘巍,丁立超.工程塑料表面金属覆层的激光定域精细去除[J],光学精密工程,2016,24(1):94-101
杨帆,刘巍,张洋,高鹏,贾振元.结合四角共线约束的大视场双目相机标定方法[J],光学学报,2016,36(7):0715001
刘巍.采用复合式靶标的近景大市场相机标定方法[J],红外与激光工程,2016,45(7):230-236
Jia, Zhenyuan,Chen, Yuqin,Liu, Wei,Zhao, Kai,Wang, Ling,Tu, Xianming.The control system for precise five-axis laser/micro-milling machine tool[J],International Journal of Industrial and Systems Engineering,2016,22(2):145-160
Jia, Zhenyuan,Liu, Yang,Liu, Wei,Zhang, Chi,Yang, Jinghao,Wang, Lingli,Zhao, Kai.A spectrum selection method based on SNR for the machine vision measurement of large hot forgings[J],OPTIK,2015,126(24):5527-5533
刘巍,毕晓丹,刘伟国.用于空腔振荡控制的压电激励器设计与试验[J],新技术新工艺,2015,11:24-27
刘巍,张驰,刘阳,王灵丽,樊超楠,贾振元.高斯混合分布激光中心线提取方法[J],激光与红外,2015,45(11):1397-1402
贾振元,王灵丽,刘巍,刘阳,樊超楠.互参考激光光条图像质量评价[J],光学精密工程,2015,23(11):3041-3050
刘巍,毕晓丹,贾振元,刘伟国.风洞模型主动抑振器的设计与实验[J],光学精密工程,2015,23(10):2895-2901
Jia, Zhenyuan,Wang, Lingli,Liu, Wei,Yang, Jinghao,Liu, Yang,Fan, Chaonan,Zhao, Kai.A field measurement method for large objects based on a multi-view stereo vision system[J],SENSORS AND ACTUATORS A-PHYSICAL,2015,234:120-132
Zhang, Yang,Liu, Wei,Li, Xiaodong,Yang, Fan,Gao, Peng,Jia, Zhenyuan.Accuracy improvement in laser stripe extraction for large-scale triangulation scanning measurement[J],OPTICAL ENGINEERING,2015,54(10)
Liu, Wei,Ding, Lichao,Zhao, Kai,Li, Xiao,Wang, Ling,Jia, Zhenyuan.Precise Positioning Method for Multi-process Connecting Based on Binocular Vision[A],2015,9903
Liu Wei,Ma Xin,Li Xiao,Chen Ling,Zhang Yang,Li Xiaodong,Shang Zhiliang,Jia Zhenyuan.High-precision pose measurement method in wind tunnels based on laser-aided vision technology[J],CHINESE JOURNAL OF AERONAUTICS,2015,28(4):1121-1130
Jia, Zhenyuan,Yang, Jinghao,Liu, Wei,Wang, Lingli,Fan, Chaonan,Zhao, Kai,Wang, Fuji,Liu, Yang.Improved camera calibration method based on perpendicularity compensation for binocular stereo vis[J],OPTICS EXPRESS,2015,23(12):15205-15223
Zhao, Kai,Jia, Zhenyuan,Liu, Wei,Ma, Jianwei,Wang, Ling.Material removal with constant depth in CNC laser milling based on adaptive control of laser fluen[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,77(5-8):797-806
Liu, Wei,Ma, Xin,Jia, Zhenyuan,Zhang, Yang,Shang, Zhiliang,Li, Xiao.Position and attitude measurement of high-speed isolates for hypersonic facilities[J],MEASUREMENT,2015,62:63-73
京公网安备 11010802027423号