近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
[1] 朱一超.Role of Grain Boundaries under Long-Time Radiation[J],PHYSICAL REVIEW LETTERS,2022,120(22):222501
[2] 张维声.Structural complexity control in topology optimization via moving morphable component (MMC) approa[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2022,56(3):535-552
[3] Xue, Dingchuan.On speeding up an asymptotic-analysis-based homogenisation scheme for designing gradient porous st[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2022,62(2):457-473
[4] 刘畅.Optimal design of shell-graded-infill structures by a hybrid MMC-MMV approach[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,369
[5] Gu, Yejun.Point defect sink efficiency of low-angle tilt grain boundaries[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2022,101:166-179
[6] 张维声.Explicit control of structural complexity in topology optimization[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,324:149-169
[7] 朱一超.Gurtin-Murdoch surface elasticity theory revisit: An orbital-free density functional theory perspe[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2022,109:178-197
[8] Luo, Jing.Formulation of voids and bubbles as biased sinks to crystalline point defects[J],SCRIPTA MATERIALIA,2022,197
[9] Xue, Dingchuan.Generation of smoothly-varying infill configurations from a continuous menu of cell patterns and t[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2022,366
[10] 朱一超.Homognenisation of a row of dislocation dipoles from discrete dislocation dynamics[J],SIAM JOURNAL ON APPLIED MATHEMATICS,2022,76(2):750-775
[11] Xue, Riye.Kirigami pattern design of mechanically driven formation of complex 3D structures through topology[J],Extreme Mechanics Letters,2022,15:139-144
[12] 孙直.The mechanical principles behind the golden ratio distribution of veins in plant leaves[J],Scientific Reports,2022,8(1):13859
[13] 朱一超.The role of dislocation pile-up in flow stress determination and strain hardening[J],SCRIPTA MATERIALIA,2022,116(1):53-56
[14] 张维声.Topology optimization with multiple materials via moving morphable component (MMC) method[J],INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING,2022,113(11):1653-1675
[15] Niu, Xiaohua.A CONTINUUM MODEL FOR DISTRIBUTIONS OF DISLOCATIONS INCORPORATING SHORT-RANGE INTERACTIONS[J],Communications in Mathematical Sciences,2022,16(2):491-522
[16] 刘畅.Additive Manufacturing-Oriented Design of Graded Lattice Structures Through Explicit Topology Opti[J],JOURNAL OF APPLIED MECHANICS TRANSACTIONS OF THE ASME,2022,84(8)
[17] Ma, Benben.A lightweight optimal design model for bolted flange joints without gaskets considering its sealin[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E JOURNAL OF PR,2022,232(2):234-255
[18] 郭旭.A magnification-based multi-asperity (MBMA) model of rough contact without adhesion[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2022,133
[19] 张维声.A Moving Morphable Component Based Topology Optimization Approach for Rib-Stiffened Structures Con[J],JOURNAL OF MECHANICAL DESIGN,2022,140(11,SI)
[20] 刘畅.An efficient moving morphable component (MMC)-based approach for multi-resolution topology optimiz[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2022,58(6):2455-2479
[21] 朱一超.A Novel Asymptotic-Analysis-Based Homogenisation Approach towards Fast Design of Infill Graded Micro[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2022
[22] 罗静.Attempts on representing sink strengths with machine learning formulations and the long-term role of[J],JOURNAL OF NUCLEAR MATERIALS,2022,544:152676-
[23] 朱一超.A three-scale homogenisation approach to the prediction of long-time absorption of radiation induc[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2022,105:1-20
[24] Zhou, Zhengcheng.Characterisation of dislocation patterning behaviour with a continuum dislocation dynamics model o[J],INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,2022,198:57-71
[25] 朱一超.Continuum dynamics of the formation, migration and dissociation of self-locked dislocation structure[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2022,96(1):369-387
[26] 马奔奔.无垫圈螺栓连接系统优化设计和泄漏率预测[J],强度与环境,2022,45(4):38-46
[27] 朱一超.有限变形下微纳尺度表面效应基于电子云密度泛函视角的建模[A],2018年全国固体力学学术会议,2022,1
[28] Xue, Riye.Explicit structural topology optimization under finite deformation via Moving Morphable Void (MMV)[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2019,344:798-818
[29] 罗静.Attempts on representing sink strengths with machine learning formulations and the long-term role of[J],JOURNAL OF NUCLEAR MATERIALS,2021,544:152676-
[30] Xue, Dingchuan,Zhu, Yichao,Li, Shaoshuai,Liu, Chang,Zhang, Weisheng,Guo, Xu.On speeding up an asymptotic-analysis-based homogenisation scheme for designing gradient porous st[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2020,62(2):457-473
[31] Zhou, Zhengcheng,Zhu, Yichao,Luo, Jing,Yang, Xiang,Guo, Xu.Characterisation of dislocation patterning behaviour with a continuum dislocation dynamics model o[J],INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES,2020,198:57-71
[32] Xue, Dingchuan,Zhu, Yichao,Guo, Xu.Generation of smoothly-varying infill configurations from a continuous menu of cell patterns and t[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2020,366
[33] 朱一超,郭旭,张维声.A Novel Asymptotic-Analysis-Based Homogenisation Approach towards Fast Design of Infill Graded Micro[J],Journal of the Mechanics and Physics of Solids,2019
[34] Zhang, Weisheng,Song, Junfu,Zhou, Jianhua,Du, Zongliang,Zhu, Yichao,Sun, Zhi,Guo, Xu.Topology optimization with multiple materials via moving morphable component (MMC) method[J],INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING,2018,113(11):1653-1675
[35] Zhu, Yichao,Wei, Yihai,Guo, Xu.Gurtin-Murdoch surface elasticity theory revisit: An orbital-free density functional theory perspe[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2017,109:178-197
[36] Zhang, Weisheng,Liu, Ying,Wei, Peng,Zhu, Yichao,Guo, Xu.Explicit control of structural complexity in topology optimization[J],COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING,2017,324:149-169
[37] Zhang, Weisheng,Zhou, Jianhua,Zhu, Yichao,Guo, Xu.Structural complexity control in topology optimization via moving morphable component (MMC) approa[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,56(3):535-552
[38] Zhu, Yichao,Wang, Jian,Xiang, Yang,Guo, Xu.A three-scale homogenisation approach to the prediction of long-time absorption of radiation induc[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2017,105:1-20
[39] Liu, Chang,Du, Zongliang,Zhang, Weisheng,Zhu, Yichao,Guo, Xu.Additive Manufacturing-Oriented Design of Graded Lattice Structures Through Explicit Topology Opti[J],JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME,2017,84(8)
[40] Gu, Yejun,Han, Jian,Dai, Shuyang,Zhu, Yichao,Xiang, Yang,Srolovitz, David J..Point defect sink efficiency of low-angle tilt grain boundaries[J],JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS,2017,101:166-179
[41] 朱一超.Homognenisation of a row of dislocation dipoles from discrete dislocation dynamics[J],SIAM Journal on Applied Mathematics,2016,76(2):750-775
[42] 朱一超.The role of dislocation pile-up in flow stress determination and strain hardening[J],Scripta Materialia,2016,116(1):53-56
[43] 朱一超.Continuum dynamics of the formation, migration and dissociation of self-locked dislocation structure[J],Journal of the Mechanics and Physics of Solids,2016,96(1):369-387
[44] D. J. Srolovitz, Y. Xiang, Y.C. Zhu, S.Y. Dai, J. Han,Y.J. Gu.Point defect sink efficiency of low-angle tilt grain boundaries,J. Mech. Phys. Solids,2017,101:166-179
[45] K. Schulz, Y. Xiang,Y. C. Zhu,K. Schulz, Y. Xiang,Y. C. Zhu.The role of dislocation pile-up in flow stress determination and strain hardening[J],Scr. Mater.,2016,116:53 - 56
[46] X. Guo, Y. Xiang, J. Wang,Y. C. Zhu.A three-scale homogenisation approach to the prediction of long-time absorption of radiation induced,J. Mech. Phys. Solids,2017,105:1-20
[47] Y. Xiang,Y. C. Zhu X. H. Niu,Y. Xiang,Y. C. Zhu X. H. Niu.Continuum dynamics of the formation, migration and dissociation of self-locked dislocation structure[J],J. Mech. Phys. Solids,2016,96:369 - 387
[48] X. Guo, Y. H. Wei,Y. C. Zhu.Gurtin-Murdoch surface elasticity theory revisit: An orbital-free density functional theory perspect,J. Mech. Phys. Solids,2017,109:178-197
[49] Y. Xiang,Y. C. Zhu,Y. Xiang,Y. C. Zhu.A continuum model for dislocation dynamics in three dimensions using the dislocation density potenti[J],J. Mech. Phys. Solids,2015,84:230-253
[50] S. J. Chapman,Y. C. Zhu,S. J. Chapman,Y. C. Zhu.Motion of screw segments in the early stage of fatigue testing,Mater. Sci. Eng. A - Struct.,2014,589:132 - 139
[51] Y. Xiang, X. H. Zhu, H. Q. Wang,Y. C. Zhu,Y. Xiang, X. H. Zhu, H. Q. Wang,Y. C. Zhu.A continuum model for dislocation dynamics incorporating Frank-Read sources and Hall-Petch relation [J],Int. J. Plast.,2014,60:19 - 39
[52] S. J. Chapman,Y. C. Zhu,S. J. Chapman,Y. C. Zhu.A natural transition between equilibrium patterns of dislocation dipoles[J],J. Elast.,2014,117:51 - 61
[53] A. Acharya, S. J. Chapman,Y. C. Zhu, A. Acharya, S. J. Chapman,Y. C. Zhu.Dislocaiton motion and instability,J. Mech. Phys. Solids,2013,61:1835–1853
[54] Y. C. Zhu, Y. Xiang,S. J. Chapman,Y. C. Zhu, Y. Xiang,S. J. Chapman.Homogenization of a row of dislocation dipoles from discrete dislocation dynamics[J],SIAM J. Appl. Math.,2016,76(2):750 - 775
京公网安备 11010802027423号