近期论文
查看导师最新文章
（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）
Department of Physics and Astronomy Uppsala University Web[1]徐胜利.Bayesian wavelet PCA methodology for turbomachinery damage diagnosis under uncertainty[J],MECHANICAL SYSTEMS AND SIGNAL PROCESSING,2021,80:1-18
明世朝.The energy absorption of long origami-ending tubes with geomertical imperfections[J],Thin-Walled Structures,2021,161(107415):1-15
Chen, Xudong.RESEARCH ON FAILURE OF SEMI-OPEN CENTRIFUGAL IMPELLER UNDER AERODYNAMIC LOAD[A],2021,7B-2017
赵海心.基于核密度估计的旋转机械损伤贝叶斯智能评价方法[J],风机技术,2021,62(3):69-76
姜孝谟.A Novel Orbit-based CNN Model for Automatic Fault Identification of Rotating Machines[A],2021
Yang, S.Bayesian Stochastic Neural Network Model for Turbomachinery Damage Prediction[J],International Journal of Prognostics and Health Management,2021,9(1):1-19
姜孝谟.基于贝叶斯LSTM的离心压缩机系统识别[A],2021
姜孝谟.基于深度学习的选转机械轴心轨迹自动识别方法[A],2021
杨树华.关于压缩机叶轮强度设计与健康运维典型问题的探讨[J],风机技术,2021,62(4):50-54
徐胜利,钟少伟,赵海心,徐刚.基于代理模型的混流泵多工况水力性能优化设计[J],排灌机械工程学报,2019,37(11):921-928
李玉韦,王博,徐胜利,赵振军.基于降阶模型的锥柱结合壳结构动力特性分析[A],2018,6
徐胜利,钟少伟,郭正,杨树华,孟继纲.考虑气动性能要求的离心压缩机叶轮应力优化[J],风机技术,2018,60(6):64-69
李姿琳,徐胜利,关振群.核主泵叶轮间隙的轴向振动特性研究[J],计算力学学报,2018,35(4):458-465
徐胜利,张锦,钟少伟,肖忠会.核主泵隔热装置温度场近似分析方法[J],核动力工程,2018,39(03):1-5
何曦,徐胜利,刘海涛,王晓放,陈旭东.基于谐响应分析的水环境下核主泵叶轮动应力研究[J],风机技术,2018,60(2):53-59
Wang, Bo,Zhou, Yan,Zhou, Yiming,Xu, Shengli,Niu, Bin.Diverse competitive design for topology optimization[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2018,57(2):891-902
Liu, Haitao,Xu, Shengli,Wang, Xiaofang,Yang, Shuhua,Meng, Jigang.A multi-response adaptive sampling approach for global metamodeling[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE,2018,232(1):3-16
周方明,徐胜利,王晓放,孙涛,王巍.CAP1400屏蔽电机主泵高效水力模型研发[J],机械工程学报,2018,54(7):176-183
李姿琳,徐胜利,关振群.核主泵叶轮间隙的轴向振动特性研究[J][J],计算力学学报,2018,35:458-465
赵海心,徐胜利,王正华,王博,陈钢.实-壳混合模型温度场计算方法研究[J],热力透平,2017,46(3):199-204
Ju, Wenying,Xu, Shengli,Wang, Xiaofang,Chen, Xudong,Yang, Shuhua,Meng, Jigang.Numerical study on the influence of tip clearance on rotating stall in an unshrouded centrifuga...[A],2017,2D-2017
周方明,王晓放,徐胜利,谢蓉,于洪昌,雍兴平,仲作文.错列导叶对反应堆冷却剂泵水力性能的影响[J],风机技术,2017,1:7-17
王博,徐胜利.Diverse competitive design for topology optimization[J],Structural and Multidisciplinary Optimization,2017,1:1-12
徐胜利.Optimization of pump hydraulic performance based on the response surface method[A],2017
徐胜利.基于响应面法多工况水力性能优化[A],2017
徐胜利,孙涛,王晓放.核主泵叶轮湿模态计算与实验研究[A],2017
徐胜利,孙涛,王晓放.Research of damping and dynamic stress for impeller of reactor coolant pump[A],2017
Liu, Haitao,Wang, Xiaofang,Xu, Shengli.Generalized Radial Basis Function-Based High-Dimensional Model Representation Handling Existing...[J],JOURNAL OF MECHANICAL DESIGN,2017,139(1)
Liu, Haitao,Xu, Shengli,Chen, Xudong,Wang, Xiaofang,Ma, Qingchao.Constrained global optimization via a DIRECT-type constraint-handling technique and an adaptive...[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2017,55(1):155-177
徐胜利,张博伦,程昉.基于CFD流场模拟的反应釜结构设计[J],化工进展,2016,35(z2):401-406
Liu, Haitao,Xu, Shengli,Wang, Xiaofang,Meng, Jigang,Yang, Shuhua.Optimal Weighted Pointwise Ensemble of Radial Basis Functions with Different Basis Functions[J],AIAA JOURNAL,2016,54(10):3117-3133
Liu, Haitao,Xu, Shengli,Wang, Xiaofang.SAMPLING STRATEGIES AND METAMODELING TECHNIQUES FOR ENGINEERING DESIGN: COMPARISON AND APPLICAT...[A],2016,2C-2016
Ma, Ying,Xu, Shengli,Liu, Haitao,Wang, Xiaofang.OPTIMIZATION OF REINFORCING RIBS OF A HOLLOW FAN BLADE USING METAMODEL-BASED OPTIMIZATION ALGOR...[A],2016,2C-2016
徐胜利.核主泵隔热装置内部流动的简化等效分析方法[A],2016
徐胜利,王晓放.Optimization of reinforcing ribs of a hollow blade using metamodel-based optimization algorithm[A],2016
徐胜利,王晓放.离心压缩机矩形蜗壳网格划分对内部流场的影响研究[A],2016
刘海涛,徐胜利,王晓放,孟继纲,杨树华.Optimal weighted pointwise ensemble of RBFs with different basis functions[J],AIAA Journal,2016,54(10):3117-3133
Liu, Haitao,Xu, Shengli,Ma, Ying,Chen, Xudong,Wang, Xiaofang.An Adaptive Bayesian Sequential Sampling Approach for Global Metamodeling[J],JOURNAL OF MECHANICAL DESIGN,2016,138(1)
Liu, Haitao,Xu, Shengli,Wang, Xiaofang,Wu, Junnan,Song, Yang.A global optimization algorithm for simulation-based problems via the extended DIRECT scheme[J],ENGINEERING OPTIMIZATION,2015,47(11):1441-1458
刘海涛,徐胜利,王晓放,宋洋.1种基于Kriging近似模型的叶片罩量优化设计方法[J],航空发动机,2015,41(5):24-27
京公网安备 11010802027423号