Freezing and dehydration together with interfacial failure are capable of causing the functional reduction of hydrogels for sensing applications. Herein, we develop a multifunctional bilayer that consists of a mussel-inspired adhesive layer and a functionally ionic layer that is composed of sodium p-styrene sulfonate (SSS) and an ionic liquid of [BMIM]Cl. The adhesive layer enables the strong adhesion

The transfer of heat energy in organic semiconductors (OSCs) plays an important role in advancing the applications of organic electronics, especially for lifetime issues. However, compared with crystalline inorganic semiconductors, the thermal transport of OSCs is less efficient and a relevant understanding is very limited. In this contribution, we show that the heat conduction of OSCs can be enhanced

The tumor extracellular matrix (ECM) plays a vital role in tumor progression and drug resistance. Previous studies have shown that breast tissue-derived matrices could be an important biomaterial to recreate the complexity of the tumor ECM. We have developed a method for decellularizing and delipidating a porcine breast tissue (TDM) compatible with hydrogel formation. The addition of gelatin methacrylamide

Perovskite solar cells (PSCs) are being studied and developed because of the outstanding properties of halide perovskites as photovoltaic materials and high conversion efficiencies achieved with the best PSCs. However, leaching out of lead (Pb) ions into the environment presents potential public health risks. We show that thiol-functionalized nanoparticles provide an economic way of minimizing Pb leaching

Ionogels are emerging materials for advanced electrochemical devices; however, their mechanical instability to external stresses has raised concerns about their safety. This study reports aligned bacterial nanocellulose (BC) ionogel films swelled with the model ionic liquid (IL) of 1-ethyl-3-methylimidazolium tetrafluoroborate (EMImBF4) for an unprecedented combination of high stiffness and high energy

Understanding the interfacial contacts between liquid metals and substrate materials is becoming increasingly important for the fast-rising liquid metal-enabled technologies. However, for such technologies, probing the contact behavior and interfacial charge transport has remained challenging due to the deformable nature of liquid metals and the presence of the surface oxide layer. Here, we encapsulate

Over the past few years, considerable effort has been directed toward the development and improvement of mechanoluminescence (ML)-based stress sensing as an efficient nondestructive inspection technique. One of the challenges in ML stress sensing is the limited luminescent intensity and sensitivity of the ML-epoxy composite film to the local stress field. Herein, we present a novel approach for increasing

Pressure-sensitive adhesives (PSAs) are usually made from viscoelastic, high-molecular-weight copolymers, which are fine-tuned by adjusting the comonomer ratios, molecular weights, and cross-link densities to optimize the adhesion properties for the desired end-use. To create a lightly cross-linked network, an ultraviolet (UV) photoinitiator can be incorporated. Here, we present the first use of perfluorophenylazide

The rise of solar steam generation is an effective strategy to mitigate clean water shortages. However, achieving further improvements in conversion efficiency and stability remains a challenge. Here, 1T/2H-MoS2 nanosheets were uniformly assembled on activated carbon fiber cloth (A-CFC) through a facial hydrothermal method, and a three-dimensional (3D)-artificial transpiration device (ATD) was prepared

The feature endowing atomic Ni–N–C electrocatalysts with exceptional intrinsic alkaline hydrogen evolution activity is hitherto not well-documented and remains elusive. To this end, we rationally exploited the hierarchical porous carbon microstructures as scaffolds to construct unique Ni–N2+2–S active sites to boost the sluggish Volmer reaction kinetics. Density functional theory reveals an obvious

Conductive atomic force microscopy (C-AFM) is widely used to determine the electronic conductivity of a sample surface with nanoscale spatial resolution. However, the origin of possible artifacts has not been widely researched, hindering the accurate and reliable interpretation of C-AFM imaging results. Herein, artifact-free C-AFM is used to observe the electron conduction channels in Si-based composite

Chronic and non-healing wounds pose a great challenge to clinical management and patients. Many studies have explored novel interventions against skin wounds, with bioactive peptides, nanoparticles, and hydrogels arousing considerable attention regarding their therapeutic potential. In this study, the prohealing peptide RL-QN15 was loaded into hollow silica nanoparticles (HSNs), with these HSN@RL-QN15

Plasmonic color printing has received significant attention owing to its advantages such as nonfading and nontoxic color expression, without necessitating the use of chemical dyes. Recently, color generation from laser-induced plasmonic nanostructures has been extensively explored because of its simplicity, cost-effectiveness, and large-scale processability. However, these methods usually utilize a

The development of 100% lead-free perovskite materials for photoelectrochemical applications is a hot topic in the current research scenario. Herein, by varying the preparation strategy, we have synthesized two distinct lead-free manganese halide perovskite nanocrystals (NCs), CsMnCl3(H2O)2 (1D-CMC3H) and Cs2MnCl4(H2O)2 (0D-C2MC4H), by simple ultrasonication/crystallization and a modified ligand-assisted

Solid-state batteries (SSBs) hold the potential to enhance the energy density, power density, and safety of conventional lithium-ion batteries. The theoretical promise of SSBs is predicated on the mechanistic design and comprehensive analysis of various solid–solid interfaces and microstructural features within the system. The spatial arrangement and composition of constituent phases (e.g., active

Photonic materials that enable visual detection of chemicals have shown great potential for wide applications in chemical, environmental, biotechnological, and food industries, but until now, using hydrophilic photonic materials for tracing water-soluble chemicals remains a major challenge due to the strong water interference. Here, we demonstrate a two-step co-assembly and subsequent surface coating

Microneedle (MN) patches enable simple self-administration of drugs via the skin. In this study, we sought to deliver drug-loaded microspheres (MSs) using MN patches and found that the poly(lactic-co-glycolic acid) (PLGA) MSs failed to localize in the MN tips during fabrication, thereby decreasing their delivered dose and delivery efficiency into skin. We determined that surface interactions between

Halide electrolytes are rising stars among inorganic solid-state electrolytes due to their high ionic conductivity and good compatibility with high-voltage electrodes. However, their traditional synthesis methods including ball-milling annealing are usually energy-intensive and time-consuming compared with liquid-mediated routes. What’s more, the only method in aqueous solution is not perfect considering

Perovskite solar cells (PSCs) own rapidly increasing power conversion efficiencies (PCEs), but their concentrated counterparts (i.e., PCSCs) show a much lower performance. A deeper understanding of PCSCs relies on a thorough study of the intensive energy losses of the device along with increasing the illumination intensity. Taking the low band gap Sn–Pb PCSC as an example, we realize a device-level

A self-healing coating possesses a broad application prospect in the metal corrosion protection area due to its pleasurable performance. By far, despite a great deal of research studies that have been reported in this field, it is still a challenge to construct an intrinsic self-healing surface that can repair a damaged structure and restore superhydrophobicity simultaneously. Herein, a self-healing

Trimethylamine (TMA) is one of the important chemical indexes to judge the freshness of marine fish. It is necessary to develop a low temperature TMA sensor to help the monitoring and prediction of the quality of marine fish in cold chain. Herein, a flexible low temperature TMA gas sensor featuring antifreezing and superior mechanical properties was developed based on the Au nanoparticle-modified MXene

CuGaTe2 has become a widely studied mid-temperature thermoelectric material due to the advantages of large element abundance, proper band gap, and intrinsically high Seebeck coefficient. However, the intrinsically high lattice thermal conductivity and low room-temperature electrical conductivity result in a merely moderate thermoelectric performance for pristine CuGaTe2. In this work, we found that

Molecule-based afterglow materials with ultralong-lived excited states have attracted great attention owing to their unique applications in light-emitting devices, information storage, and anticounterfeiting. Herein, a series of new types of two-component ionic crystalline materials were fabricated by the self-assembly of cytosine and different anions under ambient conditions. The multiple intermolecular

Over the past decade, advances in the colloidal syntheses of octahedral-shaped Pt–Ni alloy nanocatalysts for use in fuel cell cathodes have raised our atomic-scale control of particle morphology and surface composition, which, in turn, helped raise their catalytic activity far above that of benchmark Pt catalysts. Future fuel cell deployment in heavy-duty vehicles caused the scientific priorities to