19105
当前位置: 首页   >  成果及论文
成果及论文

2022

49) T. Xu,Y. Luo,S. Wu, B. Deng, S. Chen, Y. Zhong, S. Wang, G. Lévêque, R. Bachelot, F. ZhuHigh-Performance Semitransparent Organic Solar Cells: From Competing Indexes of Transparency and Efficiency Perspectives. Advanced Science 2022, 2202150. doi: 10.1002/advs.202202150.

48) Tian Lu, Hongyu Li, Minjie Li, Shenghao Wang, and Wencong Lu. Inverse Design of Hybrid Organic–Inorganic Perovskites with Suitable Bandgaps via Proactive Searching ProgressACS Omega 2022, 7, 25, 21583–21594. doi: 10.1021/acsomega.2c01380.

47) J. Ning, L. Zheng,W. Lei, S. Wang, J. Xi,J. Yang. Temperature-dependence of the band gap in the all-inorganic perovskite CsPbI3 from room to high temperaturesPhysical Chemistry Chemical Physics, 24 (2022): 16003-16010. doi: 10.1039/D2CP00940D.

46) H. Guo, R. Meng, G. Wang, S. Wang, L. Wu, J. Li, Z. Wang, J. Dong, X. Hao, Y. Zhang. Band-gap-graded Cu2ZnSn(S,Se)4 drives highly efficient solar cells. Energy & Environmental Science, 15 (2022), 693-704, doi: 10.1039/D1EE03134A. 

45) T. Lu, H. Li, M. Li*S. Wang*, W. Lu*Predicting Experimental Formability of Hybrid Organic-Inorganic Perovskites via Imbalanced LearningThe Journal of Physical Chemistry Letters, 13, 3032–3038 (2022), doi:10.1021/acs.jpclett.2c00603. 

2021

44) L. Huang, L. Zhang, J. Zhou, M. Li, C. Li, C. Li, J. Zhang, S. Wang, and H. Zeng. Surface plasmon enhanced THz emission with nanoporous gold supported CdTe. Optics Express, 29, 19853-19861 (2021), doi: 10.1364/OE.424230

43) Z. Feng, J. Si, H. Dong, C. Xu, J. Yang, Z. Zhang, K. Wang, H. Wu, Q. Hou, J. Xing, S. Wan, S. Li, W. Deng, J. Feng, A. Pal, F. Chen, S. Hu, J.-Y. Ge, C. Dong, S. Wang, W. Ren, S. Cao, Y. Liu, X. Xu, J. Zhang, B. Chen, N-C.Yeh. Evidences for pressure-induced two-phase superconductivity and mixed structures of  NiTe2  and NiTe in type-II Dirac semimetal NiTe2-x (x=0.38± 0.09) single crystals. Materials Today Physics, 17, 100339 (2021), doi: 10.1016/j.mtphys.2020.100339. 

42) J. Xi, L. Zheng, S. Wang, J. Yang, W. Zhang. Temperature-dependent structural fluctuation and its effect on the electronic structure and charge transport in hybrid perovskite CH3NH3PbI3Journal of Computational Chemistry, 42 (2021), 2213-2220, doi: 10.1002/jcc.26750. 

41) Z. Lu, H. Zhou, C. Ye, S. Chen, J. Ning, M. AHalim, S. B. Donaev, S. Wang* Fabrication of Iron Pyrite Thin Films and Photovoltaic Devices by Sulfurization in Electrodeposition Method. Nanomaterials, 11, 2844 (2021), doi: 10.3390/nano11112844.

40)  H. Sun, P. Dai, X. Li, J. Ning, S. Wang, Y. B. Qi. Strategies and methods for fabricating high performance metal halide perovskite solar cells. Journal of Energy Chemistry, 60 (2021) 300–333doi: 10.1016/j.jechem.2021.01.001.

39)  A. Lafuente-Sampietro, K. Yoshida, S. Wang, S. Ishizuka, H. Shibata, N. Sano, K. Akimoto, T. Sakurai. Effect of the double grading on the internal electric field and on the carrier collection in CIGS solar cells. Solar Energy Materials and Solar Cells, 223, 110948 (2021). doi:10.1016/j.solmat.2020.110948.

38)  F. Yang, S. Wang, P. Dai, L. Chen, A. Wakamiya, K. Matsuda. Progress in recycling organic-inorganic perovskite solar cells for eco-friendly fabricationJournal of Materials Chemistry A, 9, 2612-2627 (2021), doi: 10.1039/D0TA07495K.

2020

37)  I. Maeng, S. Lee, H. Tanaka, J.-H. Yun, S. Wang, M. Nakamura, Y.-K. Kwon, and M.-C. Jung. Unique phonon modes of CH3NH3PbBr3 hybrid perovskite without the influence of defect structure: an attempt toward a novel THz-based application. NPG Asia Materials, 12, 53 (2020)doi: 10.1038/s41427-020-0235-6.

36)     J. Yu, X. Kuang, J. Zhong, L. Cao, C. Zeng, J. Ding, C. Cong, S. Wang, P. Dai, X. Yue, Z. Liu, and Y. Liu. Observation of double indirect interlayer exciton in WSe2/WS2 heterostructure. Optics Express, 28, 13260-13268 (2020), doi: 10.1364/OE.392052.

35)    J. Cheng(#), S. Wang(#), Y. Tang, R. Hu, X. Yan, Z. Zhang, L. Li, and Q. Pei Intensification of Vertical Phase Separation for Efficient Polymer Solar Cell via Piecewise Spray Assisted by a Solvent Driving ForceSolar RRL ,1900458 (2020), doi: 10.1002/solr.201900458.

34)    F. Yang, J. Liu, Z. Lu, P. Dai, T. Nakamura, S. Wang, L. Chen, A. Wakamiya, and K. Matsuda. Recycled Utilization of a Nanoporous Au Electrode for Reduced Fabrication Cost of Perovskite Solar Cells. Advanced Science, 1902474 (2020), doi: 10.1002/advs.201902474.

33)    I. Maeng, A. Matsuyama, J.-H. Yun, S. Wang, C. Kang, C.-S. Kee, M. Nakamura, M.-C. Jung. Strong Linear Correlation between CH3NH2 Molecular Defect and THz-Wave Absorption in CH3NH3PbI3 Hybrid Perovskite Thin Film. Nanomaterials ,10, 721 (2020), doi: 10.3390/nano10040721.


2019

32)   A. L.-Sampietro, J. Chen, S. Wang, X. Hao, M. M. Islam, T. Kato, H. Sugimoto, K. Akimoto and T. Sakurai. Wavelength-dependent J–V characteristics of CuIn1-xGax(S,Se)2 solar cells and carrier recombination. Applied Physics Express, 12, 061001 (2019)doi: 10.7567/1882-0786/ab1ad8.

31)   Y. M. Lee, J.-H. Yun, A. Matsuyama, S. Kobori, I. Maeng, M.g Lyu, S. Wang, L. Wang, M.-C. Jung and M. Nakamura. Significant THz-wave absorption property in mixed δ- and α-FAPbI3 hybrid perovskite flexible thin film formed by sequential vacuum evaporation. Applied Physics Express, 12, 051003 (2019), doi: 10.7567/1882-0786/ab0eec.

30)      X. Li J. WuS. Wang, and Y. B. Qi.  Progress of all-inorganic cesium lead-free perovskite solar cells. Chemistry Letters, 48, 989,(2019), doi: 10.1246/cl.190270.


2018

29)      S. Wang, T. Sakurai, W. Wen, and Y. B. Qi. Energy level alignment at interfaces in metal halide perovskite solar cells. Advanced Materials Interfaces, 5, 1800260 (2018), doi: 10.1002/admi.201800260.

28)      S. Wang, X. Li, J. Wu, W. Wen, and Y. B. Qi. Fabrication of efficient metal halide perovskite solar cells by vacuum thermal evaporation: A progress review. Current Opinion in Electrochemistry, 11, 130, (2018), doi: 10.1016/j.coelec.2018.10.006.

27)      S. Wang, H. Hagiya, T. Nazuka, Y. Takabayashi, S. Ishizuka, H. Shibata, S. Niki, M. M. Islam, K. Akimoto, and T. Sakurai. Depth Profile of Impurity Phase in Wide-Bandgap Cu(In1-x,Gax)Se2 Film Fabricated by Three-stage Process. Journal of Electronic Materials, 47, 4944, (2018), doi: 10.1007/s11664-018-6120-1.

26)      S. Wang, X. Hao, M. M. Islam, T. Kato, H. Sugimoto, K. Akimoto and T. Sakurai. Influence of potassium treatment on electronic properties of Cu(In1-xGax)(Se1-ySy)2 solar cells studied by steady state photo-capacitance and admittance spectroscopy. Japanese Journal of Applied Physics, 57, 08RC13 (2018), doi: 10.7567/JJAP.57.08RC13.

25)      Y. Ando, S. Ishizuka, S. Wang*, J. Chen, M. M. Islam, H. Shibata, K. Akimoto, and T. Sakurai. Relationship between bandgap grading and carrier recombination for Cu(In,Ga)Se2-based solar cells. Japanese Journal of Applied Physics, 57, 08RC08 (2018), doi: 10.7567/JJAP.57.08RC08.

24)      L. Qiu, L. K. Ono, Y. Jiang, M. R. Leyden, S. R. Raga, S. Wang, and Y. B. Qi. Engineering Interface Structure to Improve Efficiency and Stability of Organometal Halide Perovskite Solar Cells. Journal of Physical Chemistry B, 122, 511 (2018), doi: 10.1021/acs.jpcb.7b03921.

23)   M. M. Islam, S. Wang, S. Ishizuka, H. Shibata, S. Niki, K. Akimoto, and T. Sakurai. Deep level emission in polycrystalline CuGaSe2 thin-films observed by micro-photoluminescence. Japanese Journal of Applied Physics, 57, 08RC02 (2018), doi: 10.7567/JJAP.57.08RC02.


2017

22)   Y. Jiang, M. R. Leyden, L. Qiu, S. Wang, L. K. Ono, Z. Wu, E. J. Juarez-Perez, Y. B. Qi. Combination of Hybrid CVD and Cation Exchange for Upscaling Cs-Substituted Mixed Cation Perovskite Solar Cells with High Efficiency and Stability. Advanced Functional Materials, 28, 1703835, (2017), doi: 10.1002/adfm.201703835.

21)   X. Hao, S. Wang*, K. Akimoto, T. Kato, H. Sugimoto, and T. Sakurai. An optimized photolithography recipe for Cu(In1-x,Gax)(Sy,Se1-y)2 (CIGSSe) solar cells. Proceeding of The 44th IEEE Photovoltaic Specialists Conference, Washington, D.C, June 25-30, 2017, doi: 10.1109/PVSC.2017.8366118.

20)   S. Wang, Y. Jiang, E. J. Juarez-Perez, L. K. Ono, and Y. B. Qi. Accelerated degradation of methylammonium lead iodide perovskites  induced by exposure to iodine vapour. Nature Energy, 2, 16195 (2017), doi: 10.1038/nenergy.2016.195.


2016

19)   Y. Jiang, E.J. Juarez-Perez, Q. Ge, S. Wang, M. R. Leyden, L. K. Ono, S. R. Raga, J. Hu, Y. B. Qi. Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells. Materials Horizons, 3, 548 (2016), doi: 10.1039/C6MH00160B.

18)   E.J. Juarez-Perez, M. R. Leyden, S. Wang, L. K. Ono, Z. Hawash, Y. B. Qi. Role of the dopants on the morphological and transport properties of spiro-MeOTAD hole transport layer. Chemistry of Materials, 28, 5702 (2016), doi: 10.1021/acs.chemmater.6b01777.

17)   L. K. Ono, M. R. Leyden, S. Wang, and Y. B. Qi. Organometal halide perovskite thin films and solar cells by vapor deposition. Journal of Materials Chemistry A, 4, 6693 (2016)doi: 10.1039/C5TA08963H.

16)   M. V. Lee, S. R. Raga, Y. Kato, M. R. Leyden, L. K. Ono, S. Wang, and Y. B. Qi. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells. Journal of Materials Research, 32, 45 (2016), doi: 10.1557/jmr.2016.272.

15)   M.-C. Jung, Y. M. Lee, J. Park, L. K. Ono, S. R. Raga, S. Wang, M. R. Leyden, B. D. Yu, S. Hong, H.-K. Lee, and Y.  B. Qi. The presence of CH3NH2 neutral species in organometal halide perovskite films. Applied Physics Letters, 108, 073901 (2016), doi: 10.1063/1.4941994.

14)   L. K. Ono, S. R. Raga, S. Wang, Y. Kato, and Y. B. Qi. Temperature-dependent hysteresis effects in perovskite-based solar cells. Journal of Materials Chemistry A, 3, 9074 (2015), doi: 10.1039/C4TA04969A.

13)   Y. Kato, L. K. Ono, M. V. Lee, S. Wang, S. R. Raga and Y. B. Qi. Silver iodide formation in methyl ammonium lead iodide perovskite solar cells with silver top electrodes. Advanced Materials Interfaces, 2, 1500195 (2015), doi: 10.1002/admi.201500195.

12)   X. Hao, S. Wang *, T. Sakurai, and K. Akimoto. Improvement of stability for small molecule organic solar cells by suppressing the trap mediated recombination. ACS Applied Materials & Interfaces, 7, 18379 (2015), doi: 10.1021/acsami.5b04334.

11)   X. Hao, S. Wang*, T. Sakurai, and K. Akimoto. Effect of bathocuproine buffer layer in small molecule organic solar cells with inverted structure. Japanese Journal of Applied Physics, 54, 04DK06 (2015), doi: 10.7567/JJAP.54.04DK06.


2010-2015

10)   S. Wang, L. K. Ono, M. R. Leyden, Y. Kato, S. R. Raga, M. V. Lee and Y. B. Qi. Smooth perovskite thin films and efficient perovskite solar cells prepared by the hybrid deposition method. Journal of Materials Chemistry A, 3, 14631 (2015), doi: 10.1039/C5TA03593G.

9)   L. K. Ono#, S. Wang#, Y. Kato, and Y. B. Qi. Fabrication of semi-transparent perovskite films with centimeter-scale superior uniformity by the hybrid deposition method. Energy & Environmental Science, 7, 3989 (2014), doi: 10.1039/C4EE02539C.

8)   X. Hao, S. Wang*, W. Fu, T. Sakurai, S. Masuda, and K. Akimoto. Novel cathode buffer layer of Ag-doped bathocuproine for small molecule organic solar cell with inverted structure. Organic Electronics, 15, 1773 (2014). doi: 10.1016/j.orgel.2014.04.030.

7)   M. R. Leyden, L. K. Ono, S. R. Raga, Y. Kato, S. Wang, and Y. B. Qi. High Performance Perovskite Solar Cells by Hybrid Chemical Vapor Deposition. Journal of Materials Chemistry A, 2, 18742 (2014), doi: 10.1039/C4TA04385E.

6)   T. Sakurai, S. Wang, S. Toyoshima, and K. Akimoto. Role of electrode buffer layers in organic solar cells.  Proceeding of the International Renewable and Sustainable Energy Conference (IRSEC’13), page 46-48, 2013, doi: 10.1109/IRSEC.2013.6529640.

5)   S. Wang, T. Sakurai, X. Hao, W. Fu, S. Toyoshima, and K. Akimoto. Favorable electronic structure for organic solar cells induced by strong interaction at interface. Journal of Applied Physics, 114, 183707 (2013), doi: 10.1063/1.4829905.

4)   S. Wang, T. Sakurai, K. Komatsu, and K. Akimoto. Effect of Ag-doped bathocuproine on the recombination properties of exciton in fullerene. Journal of Crystal Growth, 378, 415 (2013), doi: 10.1016/j.jcrysgro.2012.12.126.

3)   S. Wang, T. Sakurai, R. Kuroda, and K. Akimoto. Energy level alignment of C60/Ca interface with bathocuproine as an interlayer studied by ultraviolet photoelectron spectroscopy. Japanese Journal of Applied Physics, 51, 10NE32 (2012), doi: 10.1143/JJAP.51.10NE32.

2)   S. Wang, T. Sakurai, R. Kuroda, and K. Akimoto. Energy band bending induced charge accumulation at fullerene/bathocuproine heterojunction interface. Applied Physics Letters, 100, 243301 (2012), doi: 10.1063/1.4728996.

1)   S. Wang, J. Zhang, B. Wang, et al. The effect of post-annealing under CdCl2 atmosphere on the properties of ITO thin films deposited by DC magnetron sputtering. Journal of Materials Science: Materials in Electronics, 21, 441 (2010), doi: 10.1007/s10854-009-9932-1.