17761
当前位置: 首页   >  成果及论文
成果及论文

已发表论文

  • 已发表文献可查阅谷歌学术Google Scholar. 引用8000+; H-index=59; i10-index=150.

  • 此处仅列举2019-至今:

2021

[182] G Sun*, L Li, J Fang, Q Li. On lower confidence bound improvement matrix-based approaches for multiobjective Bayesian optimization and its applications to thin-walled structures, Thin-Walled Structures 161, 107248, 2021

[181] B Wan, A Entezari, Z Zhang, T Wilson, N Yoda, K Zheng, C Wu, G Sun*,K Sasaki, M Swain, Q Li. On fatigue failure prediction of prosthetic devices through XFEM analysis, International Journal of Fatigue, 106160, 2021

[180] Z Wang, H Xie, Q Luo, Q Li, G Sun*. Optimizaition for formability of plain woven carbon fiber fabrics, International Journal of Mechanical Sciences, 106318, 2021

[179] G Sun*, X Kong, Z Wang, Q Luo, Q Li. Experimental investigation into stamping of woven CF/PP laminates: influences of molding temperature on thermal, mesoscopic and macroscopic properties, Composite Structures, 113507, 2021

[178] X Liu, G Zheng, Q Luo, Q Li, G Sun*. Fatigue behavior of carbon fibre reinforced plastic and aluminum single-lap adhesive joints after the transverse pre-impact , international Journal of Fatigue 144,105973, 2021

2020

[177] Z Wang, W Zhang, Q Luo, G Zheng, Q Li, G Sun*. A novel failure criterion based upon forming limit curve for thermoplastic composites, Composites Part B: Engineering 202, 108320, 2020

[176] E Wang, G Sun*, G Zheng, Q Li.Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings, Composites Part B: Engineering 202, 108247, 2020

[175] C Hu, J Dong, J Luo, QH Qin, G Sun*. 3D printing of chiral carbon fiber reinforced polylactic acid composites with negative Poisson's ratios, Composites Part B: Engineering 201, 108400, 2020

[174] J Fang, C Wu, T Rabczuk, C Wu, G Sun*, Q Li. Phase field fracture in elasto-plastic solids: a length-scale insensitive model for quasi-brittle materials, Computational Mechanics 66 (4), 931-961, 2020

[173] X Huo, H Liu, Q Luo, G Sun*, Q Li. On low-velocity impact response of foam-core sandwich panels, International Journal of Mechanical Sciences 181, 105681, 2020

[172] S Li, X Guo, J Liao, Q Li, G Sun*. Crushing analysis and design optimization for foam-filled aluminum/CFRP hybrid tube against transverse impact, Composites Part B: Engineering 196, 108029, 2020

[171] S Li, X Guo, Q Li, G Sun*. On lateral crashworthiness of aluminum/composite hybrid structures, Composite Structures 245, 112334, 2020

[170] C Wu, J Fang, S Zhou, Z Zhang, G Sun*, GP Steven, Q Li. Level‐set topology optimization for maximizing fracture resistance of brittle materials using phasefield fracture model, International Journal for Numerical Methods in Engineering 121 (13), 2929-2945, 2020

[169] F Lei, X Lv, J Fang, G Sun*, Q Li. Multiobjective discrete optimization using the TOPSIS and entropy method for protection of pedestrian lower extremity ,Thin-Walled Structures 152, 106349, 2020

[168] G Sun*, X Guo, S Li, D Ruan, Q Li. Comparative study on aluminum/GFRP/CFRP tubes for oblique lateral crushing, Thin-Walled Structures 152, 106420, 2020

[167] G Zhu, J Liao, G Sun*, Q Li. Comparative study on metal/CFRP hybrid structures under static and dynamic loading, International Journal of Impact Engineering 141, 103509, 2020

[166] G Sun*, E Wang, T Zhao, G Zheng, Q Li. Inverse identification of cell-wall material properties of closed-cell aluminum foams based upon Vickers nano-indentation tests, International Journal of Mechanical Sciences 176, 105524, 2020

[165] G Sun*, L Wang, D Chen, Q Luo. Tensile performance of basalt fiber composites with open circular holes and straight notches, International Journal of Mechanical Sciences 176, 105517, 2020

[164] D Chen, G Sun*, X Jin, Q Li. Quasi-static bending and transverse crushing behaviors for hat-shaped composite tubes made of CFRP, GFRP and their hybrid structures, Composite Structures 239, 111842, 2020

[163] Z Wang, X Jin, Q Li, G Sun*.On crashworthiness design of hybrid metal-composite structures, International Journal of Mechanical Sciences 171, 105380, 2020

[162] G Sun*, W Zhang, Z Wang, H Yin, G Zheng, Q Li. A novel specimen design to establish the forming limit diagram (FLD) for GFRP through stamping test, Composites Part A: Applied Science and Manufacturing 130, 105737, 2020

[161] E Wang, Q Li, G Sun*. Computational analysis and optimization of sandwich panels with homogeneous and graded foam cores for blast resistance, Thin-Walled Structures 147, 106494, 2020

[160] C Wu, J Fang, Z Zhang, A Entezari, G Sun*, MV Swain, Q Li. Fracture modeling of brittle biomaterials by the phase-field method, Engineering Fracture Mechanics 224, 106752, 2020

[159] J Zhong, M Guazzato, J Chen, Z Zhang, G Sun*, X Huo, X Liu, R Ahmad, Q Li. Effect of different implant configurations on biomechanical behavior of full-arch implant-supported mandibular monolithic zirconia fixed prostheses, Journal of the mechanical behavior of biomedical materials 102, 103490, 2020

[158] S Li, X Guo, Q Li, D Ruan, G Sun*. On lateral compression of circular aluminum, CFRP and GFRP tubes, Composite Structures 232, 111534, 2020

[157] G Zheng, Z He, K Wang, X Liu, Q Luo, Q Li, G Sun*. On failure mechanisms in CFRP/Al adhesive joints after hygrothermal aging degradation following by mechanical tests, Thin-Walled Structures 158, 107184, 2020

[156] G Sun*, Y Tian, R Wang, J Fang, Q Li. Parallelized multiobjective efficient global optimization algorithm and its applications, Structural and Multidisciplinary Optimization, 1-24, 2020

[155] G Sun*, E Wang, J Zhang, S Li, Y Zhang, Q Li. Experimental study on the dynamic responses of foam sandwich panels with different facesheets and core gradients subjected to blast impulse, International Journal of Impact Engineering 135, 103327, 2020

2019

[154] D Chen, Q Luo, M Meng, G Sun*. Low velocity impact behavior of interlayer hybrid composite laminates with carbon/glass/basalt fibres, Composites Part B: Engineering 176, 107191, 2019

[153] L Yao, G Sun*, W He, X Meng, D Xie. Investigation on impact behavior of FMLs under multiple impacts with the same total energy: Experimental characterization and numerical simulation, Composite Structures 226, 111218, 2019

[152] W He, S Lu, K Yi, S Wang, G Sun*, Z Hu. Residual flexural properties of CFRP sandwich structures with aluminum honeycomb cores after low-velocity impact, International Journal of Mechanical Sciences 161, 105026, 2019

[151] T Pang, G Zheng, J Fang, D Ruan, G Sun*. Energy absorption mechanism of axially-varying thickness (AVT) multicell thin walled structures under out-of-plane loading, Engineering Structures 196, 109130, 2019

[150] J Fang, C Wu, T Rabczuk, C Wu, C Ma, G Sun*, Q Li. Phase field fracture in elasto-plastic solids: Abaqus implementation and case studies, Theoretical and Applied Fracture Mechanics 103, 102252, 2019

[149] G Sun*, J Zhang, S Li, J Fang, E Wang, Q Li. Dynamic response of sandwich panel with hierarchical honeycomb cores subject to blast loading, Thin-Walled Structures 142, 499-515, 2019

[148] D Chen, G Sun*, M Meng, X Jin, Q Li. Flexural performance and cost efficiency of carbon/basalt/glass hybrid FRP composite laminates, Thin-Walled Structures 142, 516-531, 2019

[147] X Huo, G Sun*, H Zhang, X Lv, Q Li. Experimental study on low-velocity impact responses and residual properties of composite sandwiches with metallic foam core, Composite Structures 223, 110835, 2019

[146] X Liu, X Shao, Q Li, G Sun*. Experimental study on residual properties of carbon fibre reinforced plastic (CFRP) and aluminum single-lap adhesive joints at different strain rates after transverse pre-impact, Composites Part A: Applied Science and Manufacturing 124, 105372, 2019

[145] J Fang, C Wu, Q Liu, G Sun*, Q Li. Implicit integration of the unified yield criterion in the principal stress space, Journal of Engineering Mechanics 145 (7), 04019041, 2019

[144] J Fang, C Wu, J Li, Q Liu, C Wu, G Sun*, Q Li. Phase field fracture in elasto-plastic solids: Variational formulation for multisurface plasticity and effects of plastic yield surfaces and hardening, International Journal of Mechanical Sciences 156, 382-396, 2019

[143] W He, L Yao, X Meng, G Sun*, D Xie, J Liu. Effect of structural parameters on low-velocity impact behavior of aluminum honeycomb sandwich structures with CFRP face sheets, Thin-Walled Structures 137, 411-432, 2019

[142] G Sun*, Z Wang, H Yu, Z Gong, Q Li. Experimental and numerical investigation into the crashworthiness of metalfoam-composite hybrid structures, Composite Structures 209, 535-547, 2019

[141] X Liu, X Shao, Q Li, G Sun*. Failure mechanisms in carbon fiber reinforced plastics (CFRP)/aluminum (Al) adhesive bonds subjected to low-velocity transverse pre-impact following by axial post-tension, Composites Part B: Engineering 172, 339-351, 2019

[140] T Liu, G Sun*, J Fang, J Zhang, Q Li. Topographical design of stiffener layout for plates against blast loading using a modified ant colony optimization algorithm, Structural and Multidisciplinary Optimization, 1-16, 2019

[139] G Sun*, M Deng, G Zheng, Q Li. Design for cost performance of crashworthy structures made of high strength steel, Thin-Walled Structures, 2019

[138] G Sun*, H Yu, Z Wang, Z Xiao, Q Li. Energy absorption mechanics and design optimization of CFRP/aluminium hybrid structures for transverse loading, International Journal of Mechanical Sciences 150, 767-783, 2019

[137] A Entezari, Z Zhang, A Sue, G Sun*, X Huo, CC Chang, S Zhou, MV Swain, Q Li. Nondestructive characterization of bone tissue scaffolds for clinical scenarios, Journal of the mechanical behavior of biomedical materials 89, 150-161, 2019



专利信息


孙光永; 李光耀; 徐峰祥; 付磊; 一种识别焊点不同区域材料静态力学性能参数的检测方法, 中国ZL201110251932.X

孙光永李光耀徐峰祥付磊一种识别焊点不同区域材料动态力学性能参数的检测方法中国ZL201110251933.4

孙光永李光耀毛丽臣田建辉一种拼焊式车门防撞梁中国ZL201210158742.8

孙光永李光耀毛丽臣陈水生一种大型薄板局部特征成形类零件翘曲回弹的控制方法中国ZL201210218188.8

李光耀孙光永张哲硕谭坚手压自旋式螺丝刀中国ZL201310175078.2

孙光永李光耀毛丽臣郭瑞泉确定板料多步成形的中间构型的几何参数的优化设计方法中国ZL201210217161.7

孙光永李光耀龚志辉付磊徐峰祥一种焊缝材料参数识别方法中国ZL201210159850.7

孙光永李光耀龚志辉徐峰祥陈刚强一种拼焊板车门的优化设计方法中国ZL201210158392.5

孙光永李光耀毛丽臣龚志辉一种背板类零件强化压痕布局优化设计方法中国ZL201210158814.9

龚志辉孙光永周顺峰杨继涛; 汪日超一种确定冲压形成汽车覆盖件的零件的材料利用率方法, 中国ZL201210183234.5

龚志辉孙光永周顺峰杨继涛; 汪日超一种确定拉伸件的修边冲剪模压力中心的方法, 中国ZL201210183366.8

龚志辉孙光永李伟平王琥; 王伏林一种凸包式防弹头盔成形方法授权书, 中国ZL201210124098.2

李光耀李洪周孙光永陈响军一种超高强度钢的热成形瞬态成形极限的模拟预测方法中国ZL201210192708.2

李光耀谭坚孙光永唐春红一种制造吸能装置的方法中国ZL201310081677.8

孙光永李光耀谭坚徐峰祥一种吸能装置中国ZL201310082195.4

孙光永李光耀徐峰祥方剑光一种缓冲吸能结构中国ZL201210192659.2

孙光永李光耀田轩屹谭坚一种基于多目标连续正交方法的稳健性汽车车身材料匹配方法中国ZL201310175079.7

孙光永李光耀谭坚一种带窗式薄壁方管吸能方法中国ZL201310669460.9

崔俊佳孙光永李光耀; 康贺贺一种基于电磁成形技术的复合波纹管及其成形装置, 中国ZL201410128175.0

孙光永崔俊佳李光耀; 康贺贺一种复合吸能管的加工装置及加工方法, 中国ZL201410128228.9

孙光永崔俊佳李光耀; 刘翔一种金属板材热成形极限实验装置及测试方法, 中国ZL201410076406.8

孙光永崔俊佳李光耀单业奇一种热塑性玻璃纤维增强铝合金层板的成形装置与方法, 中国ZL201410128520.0

孙光永崔俊佳李光耀康贺贺一种波纹管成形装置及用该装置加工的波纹管, 中国ZL201410128556.9

孙光永李光耀崔俊佳耿辉辉; 唐春红一种霍普金森拉杆测试方法, 中国ZL201410128230.6

郑刚; 杨博达; 孙光永; 刘兴隆; 李光耀; 一种用于三维结构内部裂纹扩展试验测试系统, 中国ZL201710935038.1

李光耀孙光永田轩屹徐峰祥一种适用于连接结构的离散优化设计方法中国ZL201310175749.5

李光耀孙光永崔俊佳王涛一种变厚板(VRB)三维热成形极限图的构建和使用方法中国ZL201410076398.7

崔俊佳孙光永李光耀刘翔一种高强钢板热成形极限图的建立方法中国ZL201410076641.5

孙光永李光耀崔俊佳张哲硕一种梯度化分配的薄壁吸能结构的加工方法中国ZL201410128373.7

崔俊佳; 孙光永; 李光耀; 单业奇; 一种基于电液成形的层合板的成型装置和方法, 中国ZL201410128254.1

崔俊佳李光耀孙光永蒋浩; 单业奇一种手持式电磁铆枪的减震隔振系统, 中国ZL201510004467.8

李光耀孙光永崔俊佳王涛一种变厚板等截面积单向拉伸实验试样的制备方法中国ZL201510067636.2

孙光永李光耀崔俊佳唐春红刘强徐峰祥一种识别复合材料参数的方法中国ZL201410128251.8

孙光永李光耀崔俊佳庞通康贺贺段利斌一种检测汽车零部件耐撞性的动态冲击试验方法及装置中国ZL201510004473.3

孙光永李光耀崔俊佳庞通耿辉辉段利斌检测汽车零部件抗弯刚度及吸能特性的试验方法及装置中国ZL201510004519.1

孙光永李光耀崔俊佳康贺贺一种落锤试验机的储能及复位装置中国ZL201510004805.8

孙光永朱国华李光耀一种梯度蜂窝复合体及其制作方法和应用结构中国ZL201510700009.8

郑刚孙光永李光耀庞通一种多胞汽车缓冲吸能装置中国ZL201510349661.X

崔俊佳柳泉潇潇李光耀孙光永一种用于磁脉冲焊接的圆管对心柔性夹具中国ZL201610266199.1

郑刚刘兴隆费文杰孙光永; 用于胶粘接头内部疲劳裂纹扩展试验测试系统的测试方法中国ZL201710274648.1

孙光永童少尉陈东东霍新涛余航一种能够无级调节复合材料板料厚度的可视RTM模具中国ZL201710356088.4

孙光永田野霍新涛王二冬刘兴隆一种用于固定下颌骨模型可无级调整空间位置和姿态夹具中国ZL201810262703.X

孙光永; 刘昊; 霍新涛; 殷浩; 王振; 用于固定不同尺寸的下颌骨模型可调整空间位置的夹具, 中国ZL201810262685.5