雒晓涛 - 西安交通大学 - 材料科学与工程学院

个人简介

雒晓涛，男，现为西安交通大学材料学院副教授，2007年开始从事和冷喷涂和热喷涂表面改性及器件制造方面的研究工作。2016/12-至今，西安交通大学，材料科学与工程学院，副教授； 2015/12-2017/08，美国纽约州立大学，热喷涂研究中心，博士后研究员 2013/11-2016/12，西安交通大学，材料科学与工程学院，讲师；教育经历 2009/10-2013/10，西安交通大学，材料科学与工程学院，博士； 2011/03-2011/07，日本大阪大学，接合与焊接研究所，国际研究员； 2010/05-2010/07，新加坡南洋理工大学，工学院，实习研究生； 2007/09-2009/09，西安交通大学，材料科学与工程学院，硕士； 2003/09-2007/07，西安交通大学，材料科学与工程学院，学士；

研究领域

热喷涂/冷喷涂沉积机理及涂层结构设计研究； 2. 冷喷涂金属及复合材料增材制造； 3. 基于热喷涂/冷喷涂的仿生特殊功能涂层（超疏水、高导热等）构筑及损伤机理研究。

近期论文

查看导师最新文章（温馨提示：请注意重名现象，建议点开原文通过作者单位确认）

u Luo XT, Wei YK, Wang Y, Li CJ. Microstructure and mechanical property of Ti and Ti6Al4V prepared by an in-situ shot peening assisted cold spraying, Materials & Design, 85 (2015)527-533 u Luo XT, Li CJ. Large sized cubic BN reinforced nanocomposite with improved abrasive wear resistance deposited by cold spray, Materials & Design, 83, (2015)249-256 u Yang EJ, Luo XT, Yang GJ, Li CX, Li CJ, Takahashi M. Epitaxial grain growth during 8YSZ splat formation on polycrystalline YSZ substrates by plasma spraying, Surface and Coatings Technology, 274(2015)37-43 u Luo XT, Li CX, Yang GJ, Li CJ. WC-Co composite coating deposited by cold spraying of a core-shell structured WC-Co powder, Journal of Thermal Spray Technology, 24 (2015) 100- 107 u Liu T, Luo XT, Chen, Xu, Li CJ. Morphology and Size Evolution of Interlamellar Two-Dimensional Pores in Plasma-Sprayed La2Zr2O7 Coatings During Thermal Exposure at 1300oC, Journal of Thermal Spray Technology, 24(2015)739-748 u Luo X-T, Yang Er-Juan, Shang Fu-Lin, Li C-J. Microstructure, Mechanical Properties, and Two-Body Abrasive Wear Behavior of Cold-Sprayed 20 vol.% Cubic BN-NiCrAl Nanocomposite Coating, Journal of Thermal Spray Technology, 23(2014)1181-1190 u Luo X-T, Li C-J. High velocity impact induced microstructure evolution during deposition of cold spraycoatings: A review, Surface & Coatings Technology, 254 (2014) 11-20 u Dong H, Yang, G-J, Luo X-T, Li Cheng-Xin, Li C-J. Effect of TGO Thickness on Thermal Cyclic Lifetime and Failure Mode of Plasma- SprayedTBCs, Journal of the American Ceramic Society 97 (2014) 1226-1232 u Luo XT, Yang GJ, Li C-J. Kondoh Katsuyoshi, High strain rate induced localized amorphization in cubic BN/NiCrAl nanocomposite through high velocity impact, Scripta Materials, 65 (2011) 581–584 u Luo XT, Yang GJ, Li C-J. Multiple strengthening mechanisms of cold sprayed cBNp/NiCrAl composite coating，Surface & Coatings Technology, 205 (2011) 4808-4813 u Luo XT, Yang GJ, Li C-J.Preparation of cBNp/NiCrAl nanostructured composite powders by a step-fashion mechanical alloying process, Powder Technology, 217 (2012) 591–598 u Luo XT, Li C-J. Thermal Stability of Microstructure and Hardness of Cold-Sprayed cBN/NiCrAl Nanocomposite Coating, Journal of Thermal Spray Technology, 21(2012), 578–585 u Luo XT, Yang GJ, Li C-J. Dual-scale oxide dispersoids reinforcement of Fe40at.%Al intermetallic coating for both high hardness and high fracture toughness, Materials Science and Engineering A, 555 (2012) 85– 92 u Luo XT, Li C-J. Yang GJ. Correlations between milling conditions and iron contamination, microstructure and hardness of mechanically alloyed cubic BN particle reinforced NiCrAl matrix composite powders, Journal of Alloys and Compounds，548 (2013 ) 180-187 u Luo XT, Yang EJ, Yang GJ, Li C-J, Microstructure, mechanical properties and two body abrasive wear behavior of cold-sprayed 20vol.% cubic BN-NiCrAl nanocomposite coating, Journal of Thermal Spray Technology, In press u Luo XT, Yang EJ, Yang GJ, Li C-J, Cold spraying deposition of cBN/NiCrAl nanocomposite coatings; Materials Engineering; S1 (2009) 43-47 u Yang EJ, Yang GJ, Luo XT, Li CJ, Takahashi M. Epitaxial Grain Growth During Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying[J]. Journal of Thermal Spray Technology, In press.