Issue 5, 2020

The high thermoelectric performance of slightly Sb doped PbTe alloys

Abstract

Simple chemical compositions are more suitable for practical applications of thermoelectric materials due to the high success rates of their syntheses and their higher stabilities. Here, n-type PbTe alloys doped with a small amount of Sb were synthesized, and the effects of slight doping on the thermoelectric properties were investigated. All samples have single-phase microstructures, uniform composition distributions, and non-uniform grain sizes on the micro- and nano-scales. A higher power factor of 22.5 μW K−2 cm−1 has been obtained for the composition Pb0.995Sb0.005Te, which was attributed to a reduction in resistivity and to the preservation of a relatively high Seebeck coefficient though tuning the carrier concentrations. In addition, the highly heterogeneous grain size distribution strengthens the grain boundary scattering, and the Sb doped and Te vacancies result in an enhancement in point defect scattering. These two main factors lead to a lower lattice thermal conductivity of 0.68 W m−1 K−1 for the Pb0.988Sb0.012Te alloy at 723 K. In the end, a maximum zT value of about 1.1 has been achieved for the Pb0.995Sb0.005Te alloy, which is comparable to that of Sb doped PbTe alloys with a high doping concentration.

Graphical abstract: The high thermoelectric performance of slightly Sb doped PbTe alloys

Supplementary files

Article information

Article type
Paper
Submitted
08 Nov 2019
Accepted
29 Dec 2019
First published
30 Dec 2019

J. Mater. Chem. C, 2020,8, 1679-1685

The high thermoelectric performance of slightly Sb doped PbTe alloys

T. Chen, K. Zhang, H. Wang, W. Su, F. Mehmood, T. Wang, J. Zhai, X. Wang, T. Huo and C. Wang, J. Mater. Chem. C, 2020, 8, 1679 DOI: 10.1039/C9TC06124J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements