Issue 4, 2020

Interfacial engineering of a ZnO electron transporting layer using self-assembled monolayers for high performance and stable perovskite solar cells

Abstract

We developed perovskite solar cells (PSCs) with a ZnO electron-transporting layer (ETL) of which the surface was passivated with methoxybenzoic acid self-assembled monolayers (SAMs). The self-assembled monolayer (SAM) simultaneously improved the photovoltaic performance and device stability. First, the methoxybenzoic acid, which is noncovalently bonded to the methylammonium of the perovskite layer, effectively induced dipole moments; in particular, 3,4,5-trimethoxybenzoic acid (TMBA) gave a larger workfunction shift of ZnO ETL compared with 4-methoxybenzoic acid (MBA) and 3,4-dimethoxybenzoic acid (DMBA) owing to its strong dipole moment and hydrogen-bonding between the methoxy group and ammonium. This effectively enhanced the built-in voltage of the perovskite solar cell (PSC) device, which resulted in an improved electron transfer from the active layer to the ETL and a higher open-circuit voltage. Secondly, the SAM layer controlled the wettability of the perovskite precursor solution on the ZnO ETL and significantly improved the crystalline properties of the perovskite layer. Moreover, the ZnO/SAM ETL remarkably increased the PSC device stability under ambient conditions by preventing the proton transfer reaction between the perovskite layer and the ZnO ETL. As a result, the TMBA-SAM based PSC device achieved a significantly enhanced efficiency of 13.75% compared to 1.44% for the bare ZnO with high long-term stability.

Graphical abstract: Interfacial engineering of a ZnO electron transporting layer using self-assembled monolayers for high performance and stable perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
21 Nov 2019
Accepted
21 Dec 2019
First published
24 Dec 2019

J. Mater. Chem. A, 2020,8, 2105-2113

Interfacial engineering of a ZnO electron transporting layer using self-assembled monolayers for high performance and stable perovskite solar cells

J. Han, H. Kwon, E. Kim, D. Kim, H. J. Son and D. H. Kim, J. Mater. Chem. A, 2020, 8, 2105 DOI: 10.1039/C9TA12750J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements