Correction to: npj Materials Degradation https://doi.org/10.1038/s41529-019-0071-8, published online 19 February 2019
In the title of the original version of this Article “probe” was incorrectly spelt as “prove”. This has now been corrected in both the HTML and PDF versions.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Örnek, C., Leygraf, C. & Pan, J. Author Correction: Passive film characterisation of duplex stainless steel using scanning Kelvin probe force microscopy in combination with electrochemical measurements. npj Mater Degrad 3, 13 (2019). https://doi.org/10.1038/s41529-019-0077-2
Published:
DOI: https://doi.org/10.1038/s41529-019-0077-2
This article is cited by
-
The Effects of Strain on Stability of Passivation in Austenitic Stainless Steels: Comparison with Heat Treatment
Experimental Techniques (2021)
-
Volta potential mapping of the gradient strengthened layer in 20CrMnTi by using SKPFM
Journal of Materials Science (2020)
