Skip to main content
SpringerLink
Log in

Study of the Incorporation of SiC Microfibers and Their Effect on Adherence at the Interface of a NiCoCrAlY-7YSZ Thermal Barrier Coating

  • Original Paper
  • Published:
High Temperature Corrosion of Materials Aims and scope Submit manuscript

Abstract

The present work studied the effect of the addition of SiC microfibers and their influence on interfacial adherence of NiCoCrAlY-7YSZ thermal barrier coatings (TBCs) systems. Two different coatings were fabricated (with and without the addition of SiC microfibers) and exposed to isothermal oxidation heat treatments (OHT) at 950 °C from 50 to 200 h. The microstructure and pull-off test evaluations showed that coatings reinforced with SiC possess a thinner thermally grown oxide (TGO) layer, suggesting an improvement in the oxidation resistance of these samples. In this sense, the coating with SiC also displayed better adherence resistance after 50 and 200 h of exposure. On the other hand, after the pull-off tests, reinforced samples showed a lower percentage of fracture. The above indicates that SiC microfibers enhance the interfacial adherence between the TGO and the ceramic layer (TC) by forming complex oxides resulting from the self-healing reaction mechanism.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Committee AIH. Asm specialty handbook: nickel, cobalt, and their alloys (Asm specialty handbook) (Asm specialty handbook). 2001.

  2. M. Daroonparvar, M. A. M. Yajid, N. M. Yusof, et al., Trans. Nonferrous Met. Soc. China 23, 2013 (1322).

    Article  CAS  Google Scholar 

  3. S. M. Aouadi, J. Gu, and D. Berman, J. Vac. Sci. Technol. A. 38, 2020 050802.

    Article  CAS  Google Scholar 

  4. V. Kumar and B. Kandasubramanian, Particuology 27, 2016 (11).

    Article  Google Scholar 

  5. T. Ouyang, X. Fang, Y. Zhang, et al., Surf. Coatings Technol. 286, 2016 (365).

    Article  CAS  Google Scholar 

  6. M. N. Task, B. Gleeson, F. S. Pettit, and G. H. Meier, Oxid. Met. 80, 2013 (125).

    Article  CAS  Google Scholar 

  7. J. A. Cabral-Miramontes, C. Gaona-Tiburcio, F. Almeraya-Calderón, F. H. Estupiñan-Lopez, G. K. Pedraza-Basulto, and C. A. Poblano-Salas, International Journal of Corrosion 1, 2014 (20).

    Google Scholar 

  8. S. Saeidi, K. T. Voisey, and D. G. McCartney, Journal of Thermal Spray Technology 20, 2011 (1231).

    Article  CAS  Google Scholar 

  9. T. Mori, S. Kuroda, H. Murakami, H. Katanoda, Y. Sakamoto, and S. Newman, Surf. Coatings Technol. 221, 2013 (59).

    Article  CAS  Google Scholar 

  10. R. Eriksson, H. Brodin, S. Johansson, L. Östergren, and X. H. Li, Surface and Coatings Technology 205, 2011 (5422).

    Article  CAS  Google Scholar 

  11. J. Cai, Q. Guan, P. Lv, X. Hou, Z. Wang, and Z. Han, Journal of Thermal Spray Technology 24, 2015 (798).

    Article  CAS  Google Scholar 

  12. L. Wei, H. Peng, F. Jia, L. Zheng, S. Gong, and H. Guo, Surface and Coatings Technology 276, 2015 (721).

    Article  CAS  Google Scholar 

  13. C. Wang, K. Li, X. Shi, J. Sun, Q. He, and C. Huo, Composites Part B: Engineering 125, 2017 (181).

    Article  CAS  Google Scholar 

  14. B. Liu, J. Zhou, L. Wang, and Y. Wang, Coatings 12, 2022 (1).

    CAS  Google Scholar 

  15. Z. Derelioglu, A. L. Carabat, G. M. Song, S. van der Zwaag, and W. G. Sloof, Journal of the European Ceramic Society 35, 2015 (4507).

    Article  CAS  Google Scholar 

  16. R. Ma, X. Cheng, and W. Ye, Applied Surface Science 357, 2015 (407).

    Article  CAS  Google Scholar 

  17. ASTM International, Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings13, 1 (2017)

  18. S. H. Leigh and C. C. Berndt, Journal of Thermal Spray Technology 3, 1994 (184–190).

    Article  CAS  Google Scholar 

  19. A. G. Evans and E. A. Charles, Journal of the American Ceramic Society 59, 1976 (371–372).

    Article  CAS  Google Scholar 

  20. L. Swadźba, G. Moskal, T. Gancarczyk, and B. Mendala, Archives of Materials Science and Engineering 28, 2007 (757).

    Google Scholar 

  21. J. Pourasad and N. Ehsani, Ceramics International 42, 2016 (14730).

    Article  CAS  Google Scholar 

  22. Y. C. Ge, Y. Q. Liu, S. Wu, H. Wu, P. L. Mao, and M. Z. Yi, The Transactions of Nonferrous Metals Society of China 25, 2015 (3258).

    Article  CAS  Google Scholar 

  23. J. C. Pereira, J. C. Zambrano, E. Rayón, A. Yañez, and V. Amigó, Surface Coatings Technology 338, 2018 (22).

    Article  CAS  Google Scholar 

  24. A. Ganvir, N. Markocsan, and S. Joshi, Coatings 7, 2016 (4).

    Article  Google Scholar 

  25. M. Bai, H. Maher, Z. Pala, and T. Hussain, Journal of the European Ceramic Society 38, 2018 (1878).

    Article  CAS  Google Scholar 

  26. G. Di Girolamo, F. Marra, C. Blasi, E. Serra, and T. Valente, Ceramics International 37, 2011 (2711).

    Article  Google Scholar 

  27. D. Zhang, J. Liu, Z. Xue, and X. Mao, Sufrace and Coatings Technology 252, 2014 (179).

    Article  CAS  Google Scholar 

  28. X. Ren and W. Pan, Acta Materialia 69, 2014 (397–406).

    Article  CAS  Google Scholar 

  29. Z. Lu, S. W. Myoung, E. H. Kim, J. H. Lee, and Y. G. Jung, Materials Today: Proceedings 1, 2014 (35).

    Google Scholar 

  30. Z. Y. Pan, Y. Wang, C. H. Wang, X. G. Sun, and L. Wang, Surface and Coatings Technology 206, 2012 (2484).

    Article  CAS  Google Scholar 

  31. K. Messaoudi, A. M. Huntz, and B. Lesage, Materials Science and Engineering: A 247, 1998 (248).

    Article  Google Scholar 

  32. M. Martena, D. Botto, P. Fino, S. Sabbadini, M. M. Gola, and C. Badini, Engineering Failure Analysis 13, 2006 (409).

    Article  CAS  Google Scholar 

  33. S. Nath, I. Manna, and J. D. Majumdar, Corrosion Science 88, 2014 (10).

    Article  CAS  Google Scholar 

  34. W. R. Chen, E. Irissou, X. Wu, J. G. Legoux, and B. R. Marple, Journal of Thermal Spray Technology 20, 2011 (132).

    Article  CAS  Google Scholar 

  35. J. J. Liang, H. Wei, Y. L. Zhu, et al., Journal of Materials Science 46, 2011 (500).

    Article  CAS  Google Scholar 

  36. W. Beele, N. Czech, W. J. Quadakkers, and W. Stamm, Surface and Coatings Technology 94–95, 1997 (41).

    Article  Google Scholar 

  37. R. Eriksson, H. Brodin, S. Johansson, L. Östergren, and X. H. Li, Procedia Engineering 10, 2011 (195).

    Article  CAS  Google Scholar 

  38. M. Daroonparvar, M. S. Hussain, and M. A. M. Yajid, Applied Surface Science 261, 2012 (287).

    Article  CAS  Google Scholar 

  39. C. Veytizou, J. F. Quinson, O. Valfort, and G. Thomas, Solid State Ionics 139, 2001 (315).

    Article  CAS  Google Scholar 

  40. F. J. Torres, E. Ruiz de Sola, and J. Alarcón, Journal of Non-Crystalline Solids 352, 2006 (2159).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors thank CONACYT Mexico for their financial support (CB2015-256128 and CVU-706258) and the Universidad de Guadalajara and SURESA for their technical support.

Author information

Authors and Affiliations

  1. TecNM/Instituto Tecnológico Superior de Jalisco José Mario Molina Pasquel y Henríquez, Unidad, C.P. 45019, Zapopan, Jalisco, Mexico

    Gabriel Israel Vásquez Hernández & José de Jesús Ibarra Montalvo

  2. Departamento de Ingeniería de Proyectos/CUCEI, CONAHCyT - Universidad de Guadalajara, Ciudad Universitaria, Blvd. Marcelino García Barragán 1421, C.P. 44430, Guadalajara, Jalisco, Mexico

    Marco Aurelio González Albarrán

  3. Departamento de Ingeniería de Proyectos/CUCEI, Universidad de Guadalajara, Ciudad Universitaria, Blvd. Marcelino García Barragán 1421, C.P. 44430, Guadalajara, Jalisco, Mexico

    Marco Aurelio González Albarrán & Eduardo Rodríguez de Anda

  4. CONAHCyT - Corporación Mexicana de Investigación en Materiales, 25290, Saltillo, Coahuila, Mexico

    J. C. Díaz Guillén

  5. Departamento de Ingeniería Mecánica Eléctrica, CUCEI, Universidad de Guadalajara, Blvd. Marcelino García Barragán #1421, C.P. 44430, Guadalajara, Mexico

    Jorge Manuel Chávez Aguilar

Authors
  1. Gabriel Israel Vásquez Hernández
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Marco Aurelio González Albarrán
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Eduardo Rodríguez de Anda
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. José de Jesús Ibarra Montalvo
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. J. C. Díaz Guillén
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Jorge Manuel Chávez Aguilar
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

G.I. Vásquez was involved in Investigation, Methodology, Writing – original draft, Visualization. M.A. González contributed to Project administration, Supervision, Funding acquisition. E. Rodríguez was involved in Supervision, Funding acquisition. J. Ibarra, J. Chávez and J. C. Díaz-Guillén contributed to Investigation. All authors reviewed the manuscript.

Corresponding author

Correspondence to Marco Aurelio González Albarrán.

Ethics declarations

Conflict of interest

The authors declare they have no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Vásquez Hernández, G.I., González Albarrán, M.A., Rodríguez de Anda, E. et al. Study of the Incorporation of SiC Microfibers and Their Effect on Adherence at the Interface of a NiCoCrAlY-7YSZ Thermal Barrier Coating. High Temperature Corrosion of mater. 101, 105–124 (2024). https://doi.org/10.1007/s11085-023-10177-z

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11085-023-10177-z

Keywords

Search

Navigation