Skip to main content
Log in

A Practical Approach of Measurement Uncertainty Evaluation for Gravimetrically Prepared Binary Component Calibration Gas Mixture

  • Case Report
  • Published:
MAPAN Aims and scope Submit manuscript

Abstract

Measurement uncertainty is the prime requirement of any calibration standard which is indented to use for the calibration of any instrument. In this study, uncertainty evaluation for the gravimetric prepared binary component calibration gas mixtures (CGMs) of propane in nitrogen has been performed in a practical way. CGMs are the key for accurate and consistent results in gas analysis. Three CGMs of propane in nitrogen in the range of 5000–11,000 µmol/mol were prepared using gravimetric method according to ISO 6142. Uncertainty estimation of these prepared gas mixture standards is done following the bottom up approach of ISO Guide to the Expression of Uncertainty in Measurement” (ISO/GUM) in which individual contribution of every step of preparation process contributes to the overall uncertainty estimation. According to ISO/GUM guidelines, four main stages are involved for the estimation of uncertainty in any method such as specification of measurand, identification of sources of uncertainty, quantification of these sources of uncertainty and then combining all uncertainty estimates. In this paper, magnitude of all probable uncertainty components is evaluated for the preparation of CGMs. The uncertainty component of the gravimetrically prepared CGMs of propane is found to be 0.34% relative (k = 2) at 95% confidence interval. The purity of components gas and weighing process are found to be the major sources in uncertainty contribution of preparation of calibration gas mixture. The composition of gravimetrically prepared calibration gas mixtures is verified by gas chromatography technique following ISO 6143 standard. The final estimated uncertainty associated with the certified value of CGM is found to be 0.68% relative, which includes both gravimetric and analytical uncertainty components out of which the gravimetric component of measurement uncertainly is estimated in detail in this paper.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4

References

  1. E. Amico di Meane, M. Plassa, F. Rolle and M. Sega, Metrological traceability in gas analysis at INRiM: gravimetric primary gas mixtures, Accredit. Qual. Assur., 14 (2009) 607-611.

    Article  Google Scholar 

  2. M.J.T. Milton and T.J. Quinn, Primary methods for the measurement of amount of substance, Metrologia, 38 (2001) 289-296.

    Article  ADS  Google Scholar 

  3. M.J.T. Milton, G.M. Vargha and A.S. Brown, Gravimetric methods for the preparation of standard gas mixtures, Metrologia, 48 (2011) 1-9.

    Article  ADS  Google Scholar 

  4. A.Y. Watson, R.R. Bates and D. Kennedy, Air pollution, the automobile, and public health, D.C.National Academies Press, Washington (1988).

    Google Scholar 

  5. J.G. Calvert, Hydrocarbon involvement in photochemical smog formation in Los Angeles atmosphere, Environ. Sci. Technol., 10 (2002) 256-262.

    Article  ADS  Google Scholar 

  6. L.S. Jaffe, The biological effects of photochemical air pollutants on human and animals.

  7. I. Colbeck, Measuring hydrocarbons in the atmosphere, handbook hydrocarbon, Lipid Microbiology, (2010).

  8. I.A. Platonov, O.V. Rodinkov, A.R. Gorbacheva, L.N. Moskvin and I.N. Kolesnichenko, Methods and devices for the preparation of standard gas mixtures, J. Anal. Chem., 73 (2018) 109-127.

    Article  Google Scholar 

  9. C. Fijało, T. Dymerski, J. Gębicki and J Namieśnik, Devices for the production of reference gas mixtures, 46 (2016) 361-373.

  10. M. Słomińska, P. Konieczka and J. Namieśnik, New developments in preparation and use of standard gas mixtures, TrAC Trends Anal. Chem., 62 (2014) 135-143.

    Article  Google Scholar 

  11. M. Słomińska, P. Konieczka and J. Namieśnik, Standard gas mixtures—indispensable reference materials in the analysis of gaseous media, TrAC Trends Anal. Chem., 29 (2010) 419-429.

    Article  Google Scholar 

  12. P. Konieczka, A. Świtaj-Zawadka and J. Namieśnik, Gaseous standard mixtures—the challenge of obtaining small amounts of measurands, Trends Anal. Chem., 6 (2004) 450-458.

    Article  Google Scholar 

  13. K. Hong, B.M. Kim, H.K. Bae, S. Lee, J. Tshilongo, D. Mogale, P. Seemane, T. Mphamo, H.A. Kadir, M.F. Ahmad, N.H.A. Nasir, N. Baharom, D. Soni, K. Singh, S. Bhat, S.G. Aggarwal and P. Johri, Final report of supplementary comparison for APMP.QM-S7.1: methane in nitrogen at 2000 μmol/mol, Metrologia, 57 (2020).

  14. J. Lee, J. Lee, J. Lim, D. Moon, S.G. Aggarwal, P. Johri, D. Soni, L. Hui, K.F. Ming, R. Sinweeruthai, S. Rattanasombat, O. Zuas, H. Budiman, M. Rizky Mulyana and V. Alexandrov, Final report for supplementary comparison APMP. QM-S9. 2017: 100 μmol/mol of carbon monoxide in nitrogen, Metrologia, 58 (2021).

  15. ISO 6142, Gas analysis -Preparation of calibration gas mixtures—Gravimetric method (2001).

  16. ISO 6142-1, Gas analysis—Preparation of calibration gas mixtures—Part 1: gravimetric method for Class 1 mixtures (2015).

  17. ISO 6143:2001, Gas analysis—Comparison methods for determining and checking the composition of calibration gas mixtures (2001).

  18. H. Budiman and O. Zuas, Comparison between GC-TCD and GC-FID for the determination of propane in gas mixture, Procedia Chem., 16 (2015) 465-472.

    Article  Google Scholar 

  19. M.J.T. Milton, F. Guenther, W.R. Miller and A.S. Brown, Validation of the gravimetric values and uncertainties of independently prepared primary standard gas mixtures, Metrologia, 43 (2006) 7-10.

    Article  ADS  Google Scholar 

  20. JCGM 100:2008, Evaluation of measurement data-Guide to the expression of uncertainty in measurement, GUM 1995 with minor corrections, Published by International Bureau of Weights and Measures (BIPM), France (2008).

  21. R.S. Davis, Equation for the determination of the density of moist air (1981/91), Metrologia, 29 (1992) 67-70.

    Article  ADS  Google Scholar 

  22. F.E. Jones, The air density equation and the transfer of the mass unit, J. Res. Natl. Bur. Stand., 83 (1978) 419.

    Article  Google Scholar 

  23. S.H. Oh, B.M. Kim and N. Kang, Evaluation of changes in cylinder volume due to gas filling and subsequent release, Metrologia, 50 (2013) 318-324.

    Article  ADS  Google Scholar 

  24. A.M. van der Veen*, J. Meija, A. Possolo and D.B. Hibbert, Interpretation and use of standard atomic weights (IUPAC Technical Report), Pure Appl. Chem., 93(2021) 629-646.

  25. EURACHEM/CITAC Guide CG4, Quantifying uncertainty in analytical measurement, 3rd Ed.; QUAM, (2012).

Download references

Acknowledgments

The authors, Komal, Poonam and Gazal are thankful to Council of Scientific and Industrial Research (CSIR) for providing the fellowship under CSIR-SRF scheme (P 81101). Authors are thankful to the Director, CSIR-NPL for providing all support to carry out gas metrology work, and further extend their thanks to Head of ESBM Division and Ex-Head of Gas Metrology group for their help and support.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Daya Soni.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Komal, Soni, D., Kumari, P. et al. A Practical Approach of Measurement Uncertainty Evaluation for Gravimetrically Prepared Binary Component Calibration Gas Mixture. MAPAN 37, 653–664 (2022). https://doi.org/10.1007/s12647-022-00600-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12647-022-00600-2

Keywords

Navigation