Assessing the utility of NAIP digital aerial photogrammetric point clouds for estimating canopy height of managed loblolly pine plantations in the southeastern United States

https://doi.org/10.1016/j.jag.2022.103012Get rights and content
Under a Creative Commons license
open access

Highlights

  • A model was derived that adjusts NAIP heights to better align with field heights.

  • NAIP point clouds can be used to produce canopy height on a state-wide scale.

  • Stands that have had recent thinning cannot be reliably measured.

Abstract

Remote sensing offers many advantages to supplement traditional, ground-based forest measurements, such as limiting time in the field and fast spatial coverage. Data from airborne laser scanning (lidar) have provided accurate estimates of forest height, where, and when available. However, lidar is expensive to collect, and wall-to-wall coverage in the United States is lacking. Recent studies have investigated whether point clouds derived from digital aerial photogrammetry (DAP) can supplement lidar data for estimating forest height due to DAP’s lower costs and more frequent acquisitions. We estimated forest heights using point clouds derived from the National Agricultural Imagery Program (NAIP) DAP program in the United States to create a predicted height map for managed loblolly pine stands. For 534 plots in Virginia and North Carolina, with stand age ranging from 1 year to 42 years old, field-collected canopy heights were regressed against the 90th percentile of heights derived from NAIP point clouds. Model performance was good, with an R2 of 0.93 and an RMSE of 1.44 m. However, heights in recent heavily thinned stands were consistently underestimated, likely due to between-row shadowing leading to a poor photogrammetric solution. The model was applied to non-thinned evergreen areas in Virginia, North Carolina, and Tennessee to produce a multi-state 5 m × 5 m canopy height map. NAIP-derived point clouds are a viable means of predicting canopy height in southern pine stands that have not been thinned recently.

Keywords

Remote sensing
Height estimation
Photogrammetry
Canopy height model

Data availability

Data will be made available on request.

Cited by (0)