Abstract
The thermophysical properties of three ceramic materials with the nominal composition ZrO2–7% Y2O3 prepared by methods of plasma spraying and high- and low-temperature synthesis are studied. The material formation temperature is found to influence the specific heat of the material, and the porosity and the pore size influence its thermal diffusivity.
Similar content being viewed by others
REFERENCES
Yu. A. Bondarenko, “Tendencies of development of high-temperature metallic materials and technologies when designing modern aviation gas-turbine engines,” Aviat. Mater. Technol., No. 2, 3–11 (2019). https://doi.org/10.18577/2071-9140-2019-0-2-3-11
K. Matsumoto, Y. Itoh, and T. Kameda, “EB-PVD process and thermal properties of hafnia-based thermal barrier coating,” Sci. Technol. Adv. Mater., No. 4, 153 (2003).
G. V. Samsonov, A. L. Borisova, et al., Physicochemical Properties of Oxides: A Handbook (Metallurgiya, Moscow, 1978).
N. I. Grechanyuk, P. P. Kucherenko, I. N. Grechanyuk, O. P. Vasilega, and R. V. Minakova, “Modern thermal barrier coatings for blades of gas-turbine engines and equipment for their manufacture,” Mizhvus. Zbirnik Naukovy Notatki, No. 31, 93 (2011).
E. N. Kablov, O. G. Ospennikova, and I. L. Svetlov, “High-efficient cooling of blades of GTE hot channel,” Aviat. Mater. Technol., No. 2, 3–14 (2017). https://doi.org/10.18577/2017-9140-2017-0-2-3-14
D. S. Kashin and P. A. Stekhov, “Modern thermal barrier coatings fabricated by electron-beam spraying (review),” Trudy VIAM, No. 2, 84–90 (2018). http:// www.journal.viam.ru. Cited June 11, 2021. https://doi.org/10.18577/2307-6046-2018-0-2-10-10
A. Khasui and O. Morigaki, Surfacing and Deposition (Mashinostroenie, Moscow, 1985).
A. Khasui, Deposition Engineering (Mashinostroenie, Moscow, 1975).
V. V. Kudinov, Plasma Coatings (Nauka, Moscow, 1977).
V. V. Kudinov and G. V. Bobrov, Spraying of Coatings. Theory, Technology, and Equipment: A Textbook for Universities (Metallurgiya, Moscow, 1992).
N. I. Artemenko, “Operating modes of a commercial Metco F4 plasma generator using plasma-forming gases argon and nitrogen,” Trudy VIAM, No. 5 (65), 76–89 (2018). http://www.journal.viam.ru. Cited June 11, 2021. https://doi.org/10.18577/2307-6046-2018-0-5-76-89
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by Yu. Ryzhkov
Rights and permissions
About this article
Cite this article
Artemenko, N.I., Barinov, D.Y. & Akopyan, A.G. Thermophysical Properties of a ZrO2–7% Y2O3 Ceramic Material Produced by Various Methods Used for the Deposition of Thermal Barrier Coatings. Russ. Metall. 2022, 681–684 (2022). https://doi.org/10.1134/S0036029522060052
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029522060052