Issue 10, 2022

Sustainable synthesis of acetals from glycerol as potential additives for biofuels under solvent-free conditions

Abstract

Acetals formed from glycerol find applications in several areas, their use as fuel additives being the most promising, since it results in total integration in the biodiesel chain and eliminates one of the obstacles to its production. In order to convert glycerol into acetals, the use of p-sulfonic acid calix[4]arene supported on silica (CX4SO3HSi(n)) and microwave-assisted heating was proposed, and quantitative analysis was performed by 1H NMR. The effects of the main reaction parameters were evaluated, such as temperature, reaction time and the amount of heterogeneous catalyst, using benzaldehyde and glycerol as model substrates. From the optimized conditions (0.5 mmol of glycerol, 0.5 mmol of benzaldehyde, 5 wt% of the catalyst CX4SO3HSi(n), at 110 °C in 20 min), the generality of the reaction was evaluated, obtaining twelve products with yields ranging from 6 to 99%. The important aspects of this protocol are the following: solvent-free reaction, water as the sole waste, being metal-free, and shorter reaction times.

Graphical abstract: Sustainable synthesis of acetals from glycerol as potential additives for biofuels under solvent-free conditions

Supplementary files

Article information

Article type
Paper
Submitted
13 Dec 2021
Accepted
15 Jun 2022
First published
16 Jun 2022

React. Chem. Eng., 2022,7, 2132-2140

Sustainable synthesis of acetals from glycerol as potential additives for biofuels under solvent-free conditions

G. A. D. Castro, A. L. Q. Santos, Á. G. Sathicq, V. Palermo, G. P. Romanelli and S. A. Fernandes, React. Chem. Eng., 2022, 7, 2132 DOI: 10.1039/D1RE00557J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements