Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter April 11, 2022

High-efficiency, environment-friendly moss-enriched microbial fuel cell

  • Nurettin Çek , Ahmet Erensoy , Namık Ak , Ayhan Demirbas , Ahmet Orhan Gorgulu and Hasan Uslu EMAIL logo

Abstract

Microbial fuel cells (MFCs) can be used to produce clean energy from organic wastes. Various biomasses for MFCs can be used as biofuel materials. Moss (Bryophyta) is a source of biomass materials and can be used as an alternative fuel for microbial fuel cells. In this study, moss-enriched MFCs were produced by using moss as a biofuel source and aluminum and silver as an electrode. As a result of the good electrochemical performance of the metal electrodes (aluminum and silver), higher power density than previous studies involving moss was obtained, with the highest power density in this study being 20 mW/m2. Moreover, in this study, bacterial activity, biofilm formation, soil utilization, pH change, and corrosion were investigated in MFCs and the effects of MFC on power density were discussed. The addition of soil increased the corrosion rate and internal resistance while reducing the power density. As a result of the addition of soil, the power density dropped to 16.13 mW/m2. The corrosion rate was lower than industrial corrosion. Changes in pH confirmed that organic material dissolved and chemical reactions took place. Scanning electron microscope (SEM)-Energy dispersive spectroscopy (EDS) analyzes showed the presence of Bacillus and Coccus bacteria species on the electrode surfaces. These bacteria were acted as biocatalysts by forming a biofilm on the electrode surfaces.


Corresponding author: Hasan Uslu, Department of Food Engineering, Nigde Omer Halisdemir University, Faculty of Engineering, Nigde, Turkey, E-mail:

Acknowledgment

We especially appreciate the help from Koç Holding, Arçelik and Tüpraş for the experimental instruments.

  1. Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.

  2. Research funding: None declared.

  3. Conflict of interest statement: The authors declare no conflicts of interest regarding this article.

References

Ammal, P. R., M. Prajila, and A. Joseph. 2018. “Physicochemical Studies on the Inhibitive Properties of a 1,2,4-triazole Schiff’s Base, HMATD, on the Corrosion of Mild Steel in Hydrochloric Acid.” Egyptian Journal of Petroleum 27 (3): 307–17, https://doi.org/10.1016/j.ejpe.2017.05.002.Search in Google Scholar

Baudler, A., I. Schmidt, M. Langner, A. Greiner, and U. Schröder. 2015. “Does it Have to Be Carbon? Metal Anodes in Microbial Fuel Cells and Related Bioelectrochemical Systems.” Energy & Environmental Science 8: 2048–55, https://doi.org/10.1039/c5ee00866b.Search in Google Scholar

Bombelli, P., R. J. Dennis, F. Felder, M. B. Cooper, D. M. R. Iyer, J. Royles, S. T. L. Harrison, A. G. Smith, C. J. Harrison, and C. J. Howe. 2016. “Electrical Output of Bryophyte Microbial Fuel Cell Systems Is Sufficient to Power a Radio or an Environmental Sensor.” Royal Society Open Science 3 (10): 1–15, https://doi.org/10.1098/rsos.160249.Search in Google Scholar PubMed PubMed Central

Bot, A., and J. Benites. 2005. “The Importance of Soil Organic Matter: Key to Drought-Resistant.” In Soil and Sustained Food Production. Rome: Food & Agriculture Org.Search in Google Scholar

Cicek, V. 2017. Corrosion Engineering and Cathodic Protection Handbook: With an Extensive Question and Answer Section. Beverly: John Wiley & Sons.10.1002/9781119284338Search in Google Scholar

Chen, C. Y., T. Y. Chen, and Y. C. Chung. 2014. “A Comparison of Bioelectricity in Microbial Fuel Cells with Aerobic and Anaerobic Anodes.” Environmental Technology 35 (3): 286–93, https://doi.org/10.1080/09593330.2013.826254.Search in Google Scholar PubMed

Cordas, C. M., L. T. Guerra, C. Xavier, and J. J. G. Moura. 2008. “Electroactive Biofilms of Sulphate Reducing Bacteria.” Electrochimica Acta 54: 29–34, https://doi.org/10.1016/j.electacta.2008.02.041.Search in Google Scholar

Çek, N. 2016. “Biofuel Cell Design with Moss.” In 10th International Clean Energy Symposium. Istanbul.Search in Google Scholar

Çek, N. 2017. “Examination of Zinc Electrode Performance in Microbial Fuel Cells.” Gazi University Journal of Science 30 (4): 395–402.Search in Google Scholar

Demirbas, A. 2007. “Fuel Cells as Clean Energy Converters.” Energy Sources 29: 185–91, https://doi.org/10.1080/009083190948694.Search in Google Scholar

Demirbas, A. 2008. “Direct Use of Methanol in Fuel Cells.” Energy Sources Part A 30: 527–35, https://doi.org/10.1080/15567030600817159.Search in Google Scholar

Du, H., and L. Fusheng. 2017. “Enhancement of Solid Potato Waste Treatment by Microbial Fuel Cell with Mixed Feeding of Waste Activated Sludge.” Journal of Cleaner Production 143: 336–44, https://doi.org/10.1016/j.jclepro.2016.12.104.Search in Google Scholar

El-Reedy, M. A. 2012. Offshore Structures: Design, Construction and Maintenance. Gulf Professional Publishing.10.1016/B978-0-12-385475-9.00003-1Search in Google Scholar

Erensoy, A., and N. Çek. 2018. “Alternative Biofuel Materials for Microbial Fuel Cells from Poplar Wood.” ChemistrySelect 3: 11251–7, https://doi.org/10.1002/slct.201802171.Search in Google Scholar

Erensoy, A., and N. Çek. 2021. “Investigation of Polymer Biofilm Formation on Titanium-Based Anode Surface in Microbial Fuel Cells with Poplar Substrate.” Polymers 13: 1833, https://doi.org/10.3390/polym13111833.Search in Google Scholar PubMed PubMed Central

Fan, Y., E. Sharbrough, and H. Liu. 2008. “Quantification of the Internal Resistance Distribution of Microbial Fuel Cells.” Environmental Science & Technology 42 (21): 8101–7, https://doi.org/10.1021/es801229j.Search in Google Scholar PubMed

Jothinathan, D., and R. T. Wilson. 2017. “Comparative Analysis of Power Production of Pure, Coculture, and Mixed Culture in a Microbial Fuel Cell.” Energy Sources Part A 39: 520–7, https://doi.org/10.1080/15567036.2016.1233306.Search in Google Scholar

Karra, U., S. S. Manickam, J. R. McCutcheon, N. Patel, and B. Li. 2013. “Power Generation and Organics Removal from Wastewater Using Activated Carbon Nanofiber (ACNF) Microbial Fuel Cells (MFCs).” International Journal of Hydrogen Energy 38 (3): 1588–97, https://doi.org/10.1016/j.ijhydene.2012.11.005.Search in Google Scholar

Kim, Y., Y. Kodama, C. Shim, and K. Kushida. 2014. “Carbon Exchange Rates in Polytrichum Juniperinum Moss of Burned Black Spruce Forest in Interior Alaska.” Polar Science 8 (2): 146–55, https://doi.org/10.1016/j.polar.2014.01.003.Search in Google Scholar

Kjeang, E. 2020. Microfluidic Fuel Cells and Batteries. London: Springer, 2014.Search in Google Scholar

Logan, B. E. 2009. “Exoelectrogenic Bacteria that Power Microbial Fuel Cells.” Nature Reviews Microbiology 7: 375–81, https://doi.org/10.1038/nrmicro2113.Search in Google Scholar PubMed

Pu, K. B., Q. Ma, W. F. Cai, Q. Y. Chen, Y. H. Wang, and F. J. Li. 2018. “Polypyrrole Modified Stainless Steel as High Performance Anode of Microbial Fuel Cell.” Biochemical Engineering Journal 132: 255–61, https://doi.org/10.1016/j.bej.2018.01.018.Search in Google Scholar

Rajasekar, A., and Y. P. Ting. 2010. “Microbial Corrosion of Aluminum 2024 Aeronautical Alloy by Hydrocarbon Degrading Bacteria bacillus Cereus ACE4 and Serratia marcescens ACE2.” Industrial & Engineering Chemistry Research 49: 6054–61, https://doi.org/10.1021/ie100078u.Search in Google Scholar

Sari, A., D. Mendil, M. Tuzen, and M. Soylak. 2008. “Biosorption of Cd(II) and Cr(III) from Aqueous Solution by Moss (Hylocomium splendens) Biomass: Equilibrium, Kinetic and Thermodynamic Studies.” Chemical Engineering Journal 144 (1): 1–9, https://doi.org/10.1016/j.cej.2007.12.020.Search in Google Scholar

Sun, S., Q. Zheng, J. Wen, and D. Li. 2010. “Atmospheric Corrosion of Aluminium in the Northern Taklamakan Desert Environment.” Materials and Corrosion 61: 852–9, https://doi.org/10.1002/maco.200905422.Search in Google Scholar

Tribak, Z., A. Haoudi, M. K. Skalli, Y. K. Rodi, M. El Azzouzi, A. Aouniti, B. Hammouti, and O. Senhaji. 2017. “5-Chloro-1H-indole-2,3-dione Derivative as Corrosion Inhibitör for Mild Steel in 1M H3PO4: Weight Loss, Electrochemical and SEM Studies.” Journal of Materials and Environmental Science 8: 298–309.Search in Google Scholar

Vejar, N. D., J. Sacre, B. Collao, J. Perez-Donoso, M. A. Páez, F. Pineda, B. Worker, and M. Sancy. 2016. “Enhanced Corrosion of 7075 Alloy by the Presence of Bacillus megaterium.” International Journal of Electrochemical Science 11: 9723–33, https://doi.org/10.20964/2016.11.33.Search in Google Scholar

Wi, S. G., H. J. Kim, S. A. Mahadevan, D. J. Yang, and H. J. Bae. 2009. “The Potential Value of the Seaweed Ceylon Moss (Gelidium amansii) as an Alternative Bioenergy Resource.” Bioresource Technology 100 (24): 6658–60, https://doi.org/10.1016/j.biortech.2009.07.017.Search in Google Scholar PubMed

Zhao, Y., S. Collum, M. Phelan, T. Goodbody, L. Doherty, and Y. Hu. 2013. “Preliminary Investigation of Constructed Wetland Incorporating Microbial Fuel Cell: Batch and Continuous Flow Trials.” Chemical Engineering Journal 229: 364–70, https://doi.org/10.1016/j.cej.2013.06.023.Search in Google Scholar


Supplementary Material

The online version of this article offers supplementary material (https://doi.org/10.1515/ijcre-2021-0149).


Received: 2021-05-31
Accepted: 2022-03-18
Published Online: 2022-04-11

© 2022 Walter de Gruyter GmbH, Berlin/Boston

Downloaded on 26.4.2024 from https://www.degruyter.com/document/doi/10.1515/ijcre-2021-0149/html
Scroll to top button