Hostname: page-component-7c8c6479df-hgkh8 Total loading time: 0 Render date: 2024-03-28T12:29:45.229Z Has data issue: false hasContentIssue false

Unraveling the Complexity of Nano-Dispersoids in the Oxide Dispersion Strengthened Alloy 617

Published online by Cambridge University Press:  26 May 2022

Shyam Kanta Sinha
Affiliation:
Physical Metallurgy Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu 603 102, India
Arup Dasgupta*
Affiliation:
Physical Metallurgy Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu 603 102, India Homi Bhabha National Institute, Training School Complex, Anushaktinagar, Mumbai 400094, India
M. Sivakumar
Affiliation:
Physical Metallurgy Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu 603 102, India Homi Bhabha National Institute, Training School Complex, Anushaktinagar, Mumbai 400094, India
Chanchal Ghosh
Affiliation:
Physical Metallurgy Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu 603 102, India
S. Raju
Affiliation:
Physical Metallurgy Division, Metallurgy and Materials Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu 603 102, India
*
*Corresponding author: Arup Dasgupta, E-mail: arup@igcar.gov.in
Get access

Abstract

Nanocrystalline oxides are mainly responsible for Ni-base oxide dispersion strengthened (ODS) superalloys excellent thermo-mechanical properties. To establish the microstructural correlations between the metallic matrix and various oxide dispersoids, we report here the atomic-scale structure and chemistry of the complex nano-oxide dispersoids. Ultrahigh-resolution Cs-aberration-corrected scanning transmission electron microscopy (STEM) based techniques have been used to resolve nano-dispersoids in the Alloy 617 ODS. These nano-oxides, interestingly, possess a variety of high-angle annular dark-field (HAADF) contrasts, that is, bright, dark, and bi-phases. Both the light and heavy atoms have been found to be present in Y–Al–O complex-oxide nanostructures in varying quantities and forming a characteristic interface with the metallic matrix. In overcoming the limitation of conventional STEM-HAADF imaging, the integrated differential phase-contrast imaging technique was employed to investigate the oxygen atoms along with other elements in the dispersoids and its interface with the matrix. The most intriguing aspect of the study is the discovery of a few atoms thick Al2O3 interlayer (shell) around a monoclinic Y–Al–O core in the Ni-matrix. On the other hand, when the dispersoid is a hexagonal type Y–Al–O complex, the interface energy is already low, maintaining a semi-coherent interface and it was devoid of a shell.

Type
Materials Science Applications
Copyright
Copyright © The Author(s), 2022. Published by Cambridge University Press on behalf of the Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Present Address: Indian Institute of Technology-Madras, Chennai 600 036, India.

References

Aghamiri, SS, Shahverdi, H, Ukai, S, Oono, N, Taya, K, Miura, S, Hayashi, S & Okuda, T (2015). Microstructural characterization of a new mechanically alloyed Ni base ODS superalloy powder. Mater Charact 100, 135142.CrossRefGoogle Scholar
Changqing, L, ZHenting, W, Mingfu, Z & Hongbo, Z (2013). Interactions between Y2O3-Al mixture studied by solid-state reaction method. Vacuum 87, 710.CrossRefGoogle Scholar
Cowley, JM, Hansen, MS & Wang, S-Y (1995). Imaging modes with an annular detector in STEM. Ultramicroscopy 58, 1824.CrossRefGoogle Scholar
Dasgupta, A, Divakar, R, Parida, PK, Ghosh, C, Saroja, S, Mohandas, E, Vijayalakshmi, M, Jayakumar, T & Raj, B (2012). Electron microscopy studies on oxide dispersion strengthened steels. In Materials Challenges and Testing for Supply of Energy and Resources, Böllinghaus, T, Lexow, J, Kishi, T & Kitagawa, M (Eds.), pp. 117128. Berlin, Heidelberg: Springer.CrossRefGoogle Scholar
Dawson, K, Haigh, SJ, Tatlock, GJ & Jones, AR (2015). Nano-particle precipitation in mechanically alloyed and annealed precursor powders of legacy PM2000 ODS alloy. J Nucl Mater 464, 200209.CrossRefGoogle Scholar
de Graaf, S, Momand, J, Mitterbauer, C, Lazar, S & Kooi, BJ (2020). Resolving hydrogen atoms at metal-metal hydride interfaces. Sci Adv 6, eaay4312.CrossRefGoogle ScholarPubMed
Fischer, JJ (1978). Dispersion strengthened ferritic alloy for use in liquid metal fast breeder reactors. US Patent 4,075,010.Google Scholar
Hay, RS (1994). Kinetics and deformation during the reaction of yttrium-aluminum perovskite and alumina to yttrium-aluminum garnet. J Ceram Soc 77, 14731485.CrossRefGoogle Scholar
Hirata, A, Fujita, T, Wen, YR, Schneibel, JH, Liu, CT & Chen, MW (2011). Atomic structure of nanoclusters in oxide-dispersion-strengthened steels. Nat Mater 10, 922926.CrossRefGoogle ScholarPubMed
Hsiung, LL, Fluss, MJ, Tumey, SJ, Choi, BW, Serruys, Y, Willaime, F & Kimura, A (2010). Formation mechanism and the role of nanoparticles in Fe-Cr ODS steels developed for radiation tolerance. Phy Rev B 82, 184103.CrossRefGoogle Scholar
Jia, CL, Lentzen, M & Urban, K (2003). Atomic-resolution imaging of oxygen in perovskite ceramics. Science 299, 870873.CrossRefGoogle ScholarPubMed
Kim, T-K, Bae, C-S, Kim, D-H, Jang, J-S, Kim, S-H, Lee, C-B & Hahn, D-H (2008). Microstructural observation and tensile isotropy of an austenitic ODS steel. Nucl Eng Technol 40, 305310.Google Scholar
Kim, W-G, Park, J-Y, Ekaputra, I, Kim, M-H & Kim, Y-W (2014). Analysis of creep behavior of alloy 617 for use of VHTR system. Procedia Mater Sci 3, 12851290.CrossRefGoogle Scholar
Klöwer, J (2017). Alloy 617 and derivatives. In Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Di Gianfrancesco, A (Ed.), pp. 547570. Amsterdam: Woodhead Publishing, Elsevier.CrossRefGoogle Scholar
Klueh, RL, Maziasz, PJ, Kim, IS, Heatherly, L, Hoelzer, DT, Hashimoto, N, Kenik, EA & Miyahara, K (2002). Tensile and creep properties of an oxide dispersion-strengthened ferritic steel. J Nucl Mater 307, 773777.Google Scholar
Koch, CT (2002). Determination of core structure periodicity and point defect density along dislocations. PhD Thesis, Arizona State University.Google Scholar
Lazić, I, Bosch, EGT & Lazar, S (2016). Phase contrast STEM for thin samples: Integrated differential phase contrast. Ultramicroscopy 160, 265280.Google ScholarPubMed
Mankins, W, Hosier, J & Bassford, T (1974). Microstructure and phase stability of INCONEL alloy 617. Metall Trans 5, 25792590.CrossRefGoogle Scholar
Meltzman, H, Mordehai, D & Kaplan, WD (2012). Solid-solid interface reconstruction at equilibrated Ni-Al2O3 interfaces. Acta Mater 60, 43594369.Google Scholar
Mino, K, Kitagawa, M, Ohtomo, A & Saiga, Y (1980). Effect of thermal and mechanical history on the creep rate of Inconel 617. Trans Iron Steel Inst Jpn 20, 826832.CrossRefGoogle Scholar
Mo, K, Lovicu, G, Tung, H-M, Chen, X, Miao, Y, Hansen, JB & Stubbins, JF (2013). Effect of orientation on plastic deformations of alloy 617 for VHTR applications. J Nucl Mater 443, 366377.CrossRefGoogle Scholar
Momma, K & Izumi, F (2011). VESTA 3 for three-dimensional visualization of crystal, volumetric and morphology data. J Appl Crystallogr 44, 12721276.CrossRefGoogle Scholar
Odette, GR (2014). Recent progress in developing and qualifying nanostructured ferritic alloys for advanced fission and fusion applications. J Microsc 66, 24272441.Google Scholar
Odette, GR, Alinger, MJ & Wirth, BD (2008). Recent developments in irradiation-resistant steels. Annu Rev Mater Res 38, 471503.CrossRefGoogle Scholar
Okuda, T & Fujiwara, M (1995). Dispersion behavior of oxide particles in mechanically alloyed ODS steel. J Mater Sci Lett 14, 16001603.CrossRefGoogle Scholar
Oono, N, Tang, QX & Ukai, S (2016). Oxide particle refinement in Ni-based ODS alloy. Mater Sci Eng A 649, 250253.CrossRefGoogle Scholar
Parida, PK, Dasgupta, A, Jayasankar, K, Kamruddin, M & Saroja, S (2013). Structural studies of Y2O3 dispersoids during mechanical milling and annealing in a Fe-15 Y2O3 model ODS alloy. J Nucl Mater 441, 331336.CrossRefGoogle Scholar
Park, J-J, Choe, H-J, Hong, S-M, Lee, M-K & Rhee, C-K (2012). Synthesis of Ni–Y2O3 nanocomposite powders by a very high speed planetary milling process: Microstructural development and refinement behaviour. Powder Technol 230, 139144.CrossRefGoogle Scholar
Pasebani, S, Dutt, AK, Burns, J, Charit, I & Mishra, RS (2015). Oxide dispersion strengthened nickel based alloys via spark plasma sintering. Mater Sci Eng A 630, 155169.CrossRefGoogle Scholar
Pennycook, SJ (2012). Seeing the atoms more clearly: STEM imaging from the Crewe era to today. Ultramicroscopy 123, 2837.CrossRefGoogle Scholar
Pennycook, SJ & Nellist, PD (2011). Scanning Transmission Electron Microscopy. New York: Springer.CrossRefGoogle ScholarPubMed
Porter, DA, Easterling, KE & Sherif, MY (2008). Phase Transformation in Metals and Alloys. New York: CRC Press.Google Scholar
Raghavendra, K, Dasgupta, A, Ghosh, C, Jayasankar, K, Srihari, V & Saroja, S (2018). Development of a novel ZrO2 dispersion strengthened 9Cr ferritic steel: Characterization of milled powder and subsequent annealing behaviour. Powder Technol 327, 267274.CrossRefGoogle Scholar
Read, WT & Shockey, W (1950). Dislocation models of crystal grain boundaries. Phys Rev 78, 275289.CrossRefGoogle Scholar
Saroja, S, Dasgupta, A, Divakar, R, Raju, S, Mohandas, E, Vijayalakshmi, M, Bhanu Sankara Rao, K & Raj, B (2011). Development and characterization of advanced 9Cr ferritic/martensitic steels for fission and fusion reactors. J Nucl Mater 409, 131139.Google Scholar
Schaffer, GB, Loretto, MH, Smallman, RE & Brooks, JW (1989). The stability of the oxide dispersion in INCONEL alloy MA6000. Acta Metall 37, 25512558.Google Scholar
Sims, CT (1984). A history of superalloy metallurgy for superalloy metallurgists. In Superalloys, pp. 399–419.CrossRefGoogle Scholar
Sivakumar, M, Dasgupta, A, Ghosh, C, Sornadurai, D & Saroja, S (2019). Optimisation of high energy ball milling parameters to synthesize oxide dispersion strengthened alloy 617 powder and its characterization. Adv Powder Technol 30, 23202329.CrossRefGoogle Scholar
Sivakumar, M, Sinha, SK, Dasgupta, A & Shaikh, S (2021). Structure and texture of oxide dispersion strengthened alloy 617 for very high temperature applications. Metall Mater Trans A 52, 49744986.CrossRefGoogle Scholar
Tang, Q, Ukai, S, Oono, N, Hayashi, S, Leng, B, Sugino, Y, Han, W & Okuda, T (2012). Oxide particle refinement in 4.5 mass% Al Ni-based ODS superalloys. Mater Trans 53, 645651.CrossRefGoogle Scholar
Ukai, S & Fujiwara, M (2002). Perspective of ODS alloys application in nuclear environments. J Nucl Mater 307, 749757.CrossRefGoogle Scholar
Ukai, S, Harada, M, Okada, H, Inoue, M, Nomura, S, Shikakura, S, Asabe, K, Nishida, T & Fujiwara, M (1993). Alloying design of oxide dispersion-strengthened ferritic steel for long-life FBRs core materials. J Nucl Mater 204, 6573.CrossRefGoogle Scholar
Wang, M, Sun, H, Zou, L, Zhang, G, Li, S & Zhou, Z (2015). Structural evolution of oxide dispersion strengthened austenitic powders during mechanical alloying and subsequent consolidation. Powder Technol 272, 309315.CrossRefGoogle Scholar
Wen, L, Sun, X, Xiu, Z, Chen, S & Tsai, C-T (2004). Synthesis of nanocrystalline yttria powder and fabrication of transparent YAG ceramics. J Eur Ceram Soc 24, 26812688.CrossRefGoogle Scholar
Yücelen, E, Lazić, I & Bosch, EGT (2018). Phase contrast scanning transmission electron microscopy imaging of light and heavy atoms at the limit of contrast and resolution. Sci Rep 8, 2676.CrossRefGoogle ScholarPubMed