Abstract
The structure and mechanical properties of the titanium alloy VT6 joint diffusion welded in vacuum at 820°C using an ultrafine-grained interlayer made of alloy VT22 in are studied after annealing at 900°C for 2 h. The heating-induced activation of diffusion processes is found to halve the number of micropores in the weld zone and to increase the tensile strength of the welded joint from 975 to 1108 MPa. The impact toughness of this joint after heat treatment corresponds to the initial impact toughness of the VT6 alloy.
Similar content being viewed by others
REFERENCES
R. R. Mulyukov, “Development of principles of production and research of bulk nanostructured materials at the Institute for Metals Superplasticity Problems, Russian Academy of Sciences,” Ross. Nanotekhnol. No. 7, 38–53 (2007).
O. R. Valiakhmetov, R. M. Galeev, V. A. Ivan’ko, et. al., “The use of nanostructured materials and nanotechnologies for the elaboration of hollow structures,” Nanotechnol. Russ. 5 (1–2), 108–117 (2010).
M. Kh. Mukhametrakhimov, “Making weld joints of dissimilar titanium alloys under low-temperature superplasticity conditions,” Pis’ma Mater. 7 (2), 193–197 (2017).
O. A. Kaibyshev, R. Ya. Lutfullin, and V. K. Berdin, “Mechanism of solid-phase compound formation in the state of superplasticity,” Dokl. Akad. Nauk 319 (3), 615–628 (1991).
R. Ya. Lutfullin, O. R. Valiakhmetov, R. M. Galeev, and M. Kh. Mukhametrakhimov, “Superplasticity and weldability of VT8 titanium alloy in the solid state,” Rus. Metall. (Metally), No. 2, 125–129 (2002).
R. Ya. Lutfullin and M. Kh. Mukhametrakhimov, “Effect of initial structure on the mechanical properties of specimens of titanium alloy VT6 joined in the superplastic state,” Metalloved. Term. Obrab. Met., No. 1, 11–13 (2006).
O. A. Kaibyshev, G. A. Salishchev, R. M. Galeev, R. Ya. Lutfullin, and O. R. Valiakhmetov, RF Patent 2134308, Bull. Izobret. (1999).
R. Ya. Lutfullin, O. A. Kaibyshev, O. R. Valiakhmetov, M. Kh. Mukhametrakhimov, R. V. Safiullin, and R. R. Mulyukov, “Joint of solid nanocrystalline titanium alloys,” Perspekt. Mater. No. 4, 21–25 (2003).
R. Z. Valiev, “Creation of nanostructured metals and alloys with unique properties using severe plastic deformation,” Ross. Nanotekhnol. 1 (1–2) 208–216 (2006).
R. Ya. Lutfullin, A. A. Kruglov, R. V. Safiullin, M. Kh. Mukhametrahimov, and O. A. Rudenko, “Processing properties of nano- and submicro-crystalline Ti–6Al–4V titanium alloy,” Mater. Sci. Eng., A 503, 52–54 (2009).
E. Yu. Klassman and V. V. Astanin, “Low-temperature superplasticity of VT22 titanium alloy,” Lett. Mater. 10 (1), 10–15 (2020).
S. P. Belov, M. Ya. Brun, S. G. Glazunov, et al. Metallurgy of Titanium and Its Alloys, Ed. by B. A. Kolachev and S. G. Glazunov (Metallurgiya, Moscow, 1992).
Funding
This work was performed in terms of Basic Research state assignment no. AAAA-A17-117041310221-5 for the Institute for Metals Superplasticity Problems, Russian Academy of Sciences.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The author declares that he has no conflicts of interest.
Additional information
Translated by T. Gapontseva
Rights and permissions
About this article
Cite this article
Mukhametrakhimov, M.K. Effect of Heat Treatment on the Structure and Mechanical Properties of the Solid-Phase VT6 Alloy Welded Joint with an Ultrafine-Grained VT22 Alloy Interlayer. Russ. Metall. 2022, 391–395 (2022). https://doi.org/10.1134/S003602952204022X
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S003602952204022X