Abstract
The effect of neutron irradiation on the mechanical properties of commercially pure iron upon plastic deformation at elevated temperatures has been studied. The interaction of impurity atoms with radiation-induced defects has been found to suppress dynamic strain aging. A significant decrease in plasticity due to blue brittleness has not been observed in the samples irradiated by neutrons. High-energy particles have also been revealed to increase the plasticity of irradiated Armco iron and the number of microstructural deformation mechanisms during plastic flow at elevated temperatures.
Similar content being viewed by others
REFERENCES
V. K. Babich, Yu. P. Gul’, and I. E. Dolzhenkov, Deformation Behavior of Steel (Metallurgiya, Moscow, 1972) [in Russian].
A. S. Alomari, “Serrated yielding in austenitic stainless steels,” Mater. High Temp. 38, No. 4, 222–236 (2021).
P. G. McCormick, “Theory of flow localisation due to dynamic strain ageing,” Acta Metall. 36, No. 12, 3061–3067 (1988).
P. Rodriguez, “Serrated plastic flow,” Bull. Mater. Sci. 6, No. 4, 653–663 (1984).
M. C. Cai, L. S. Niu, T. Yu, H. J. Shi, and X. F. Ma, “Strain rate and temperature effects on the critical strain for Portevin–Le Chatelier effect,” Mater. Sci. Eng., A 527, No. 20, 5175–5180 (2010).
T. R. Jacobs, D. K. Matlock, and K. O. Findley, “Characterization of localized plastic deformation behaviors associated with dynamic strain aging in pipeline steels using digital image correlation,” Int. J. Plast. 123, 70–85 (2019).
S.-G. Hong and S.-B. Lee, “The tensile and low-cycle fatigue behavior of cold worked 316L stainless steel: influence of dynamic strain aging,” Int. J. Fatigue 26, No. 8, 899–910 (2004).
C.-C. Li and W. C. Leslie, “Effects of dynamic strain aging on the subsequent mechanical properties of carbon steels,” Metall. Mater. Trans. A 9, No. 12, 1765–1775 (1978).
S. K. Singh, K. Mahesh, and A. K. Gupta, “Prediction of mechanical properties of extra deep drawn steel in blue brittle region using Artificial Neural Network,” Mater. Des. 31, No. 5, 2288–2295 (2010).
G. S. Was, Fundamentals of Radiation Materials Science: Metals and Alloys (Springer, Berlin, 2007).
G. de Bellefon and J. C. van Duysen, “Tailoring plasticity of austenitic stainless steels for nuclear applications: Review of mechanisms controlling plasticity of austenitic steels below 400°C,” J. Nucl. Mater. 475, 168–191 (2016).
D. S. Sairanbayev, S. N. Koltochnik, A. A. Shaimerdenov, M. Sh. Tulegenov, Y. A. Kenzhin, and K. Tsuchiya, “Time history of performance parameters of WWR‑K reactor during gradual replacement of the water reflector by a beryllium one,” Russ. Phys. J. 63, No. 12, 2165–2177 (2021).
K. M. Nazarov, B. Muhametuly, E. A. Kenzhin, S. E. Kichanov, D. P. Kozlenko, E. V. Lukin, and A. A. Shaimerdenov, “New neutron radiography and tomography facility TITAN at the WWR-K reactor,” Nucl. Instrum. Methods Phys. Res., Sect. A 982, 164572 (2020).
B. Pan, “Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals,” Meas. Sci. Technol. 29, No. 8, 082001 (2018).
B. Pan, K. Qian, H. Xie, and A. Asundi, “Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review,” Meas. Sci. Technol. 20, No. 6, 062001.
D. Z. Turner, Digital Image Correlation Engine (DICe) Reference Manual, Sandia Rep.: SAND2015-10606 O (2015).
D. Z. Turner, An Overview of the Virtual Strain Gauge Formulation in DICe, Sandia Rep.: SAND2018-5463R (2018).
K. V. Tsai, Doctoral Dissertation in Mathematics and Physics (Almaty, 2010).
K. L. Murty, “Is neutron radiation exposure always detrimental to metals (steels)? 5954,” Nature 308, No. 5954, 51–52 (1984).
I. Charit and K. L. Murty, “Effect of radiation exposure on the Hall–Petch relation and its significance on radiation embrittlement in iron and ferritic steels,” Trans. SMiRT 19 (Toronto, 2007).
Funding
This work was supported by the Ministry of Education and Science of the Republic of Kazakhstan (project no. AP08052488).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by T. Gapontseva
Rights and permissions
About this article
Cite this article
Merezhko, M.S., Merezhko, D.A. & Tsai, K.V. Mechanical Properties of Neutron-Irradiated Armco Iron upon Plastic Deformation at Elevated Temperatures. Phys. Metals Metallogr. 123, 193–199 (2022). https://doi.org/10.1134/S0031918X22020089
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0031918X22020089