Abstract
Economic gas production from unconventional shale-gas reservoirs requires hydraulic fracturing to reconnect and open existing fractures which are lower than the actual fracture gradient. Estimating sensitive parameters of fractured sweet spots such as effective stress parameter and fracture properties from azimuthal seismic amplitude data can be useful to optimize the development of shale-gas fractured reservoirs. Based on the anisotropic Gassmann’s equation and the relationship between porosity and effective stress, we propose a simplified expression of the saturated stiffness tensor for a horizontal transverse isotropic (HTI) model formed by a single rotationally symmetric set of vertical fractures. Using the perturbation in the stiffness matrix, we derive a linearized reflection coefficient as a function of effective stress parameter and fracture parameters and corresponding Fourier series expression. The sensitivity analysis of Fourier coefficients (FCs) shows that the zeroth FC is sensitive to effective stress parameter, and the second FC is sensitive to fracture parameters. Thus, we propose to estimate the effective stress parameter and fracture weaknesses using a three-step azimuthal FCs inversion involving 1) estimating the FCs using azimuthal seismic data, 2) estimating the effective stress parameter using the zeroth FC, and 3) estimating the normal and tangential fracture weaknesses using the second FC. A synthetic seismic data example reveals that the effective stress parameter and fracture parameters can be reliably estimated even with moderate noise. Test on a real data set implies that the proposed inversion method can generate meaningful results that are useful for identifying abnormal pressure and fractures in reservoirs.
Article Highlights
-
PP-wave reflection coefficient and the corresponding Fourier series expression are derived in terms of effective stress parameter and fracture weaknesses for an HTI model
-
A three-step azimuthal FCs inversion for estimating the effective stress parameter and fracture weaknesses from azimuthal seismic data is established
-
Tests on synthetic and real datasets imply the proposed inversion approach has potential in generating reliable results of the effective stress parameter and fracture weaknesses for seismic characterization of abnormal pressure and fractured reservoir identification
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Alemie W, Sacchi MD (2011) High-resolution three-term AVO inversion by means of a Trivariate Cauchy probability distribution. Geophysics 76:R43–R55. https://doi.org/10.1190/1.3554627
Athy LF (1930) Density, porosity, and compaction of sedimentary rocks. Aapg Bull 14:1–24. https://doi.org/10.1306/3D93289E-16B1-11D7-8645000102C1856D
Bachrach R, Sengupta M, Salama A (2009) Reconstruction of the layer anisotropic elastic parameter and high resolution fracture characterization from P-wave data: a case study using seismic inversion and Bayesian rock physics parameter estimation. Geophys Prospect 57:253–262. https://doi.org/10.1111/j.1365-2478.2008.00768.x
Bakulin A, Grechka V, Tsvankin I (2000) Estimation of fracture parameters from reflection seismic data-Part I: HTI model due to a single fracture set. Geophysics 65:1788–1802. https://doi.org/10.1190/1.1444863
Barone A, Sen MK (2018) A new Fourier azimuthal amplitude variation fracture characterization method: case study in the Haynesville Shale. Geophysics 83:101–120. https://doi.org/10.1190/geo2017-0030.1
Beylkin G, Burridge R (1990) Linearized inverse scattering problems in acoustics and elasticity. Wave Motion 12:15–52. https://doi.org/10.1016/0165-2125(90)90017-X
Biot MA (1941) General theory of three-dimensional consolidation. J Appl Phys 12:155–164. https://doi.org/10.1063/1.1712886
Biot MA (1955) Theory of elasticity and consolidation for a porous anisotropic solid. J Appl Phys 26:182–185. https://doi.org/10.1063/1.1721956
Bowers GL (1995) Pore pressure estimation from velocity data: accounting for overpressure mechanisms besides undercompaction. SPE Drill Complet 10:89–95. https://doi.org/10.2118/27488-PA
Buland A, Omre H (2003) Bayesian linearized AVO inversion. Geophysics 68:185–198. https://doi.org/10.1190/1.1543206
Carcione JM (2001) Wave fields in real media: wave propagation in anisotropic, anelastic and porous media. In: Seismic exploration Volume 31, Pergamon an Imprint of Elsevier Science
Carroll MM (1979) An effective stress law for anisotropic elastic deformation. J Geophys Res Solid Earth 84:7510–7512. https://doi.org/10.1029/JB084iB13p07510
Chapman CH, Coates RT (1994) Generalized Born scattering in anisotropic media. Wave Motion 19:309–341. https://doi.org/10.1016/0165-2125(94)90001-9
Chen H, Chen T, Innanen KA (2020a) Estimating tilted fracture weaknesses from azimuthal differences in seismic amplitude data. Geophysics 85:R135–R146. https://doi.org/10.1190/geo2019-0344.1
Chen H, Li J, Innanen KA (2020b) Nonlinear inversion of seismic amplitude variation with offset for an effective stress parameter. Geophysics 85:R299–R311. https://doi.org/10.1190/geo2019-0154.1
Coates RT, Chapman CH (1991) Generalized Born scattering of elastic waves in 3-D media. Geophys J Int 107:231–263. https://doi.org/10.1111/j.1365-246X.1991.tb00823.x
Das B, Chatterjee R (2018) Mapping of pore pressure, in-situ stress and brittleness in unconventional shale reservoir of Krishna-Godavari basin. J Nat Gas Sci Eng 50:74–89. https://doi.org/10.1016/j.jngse.2017.10.021
Downton JE (2005) Seismic parameter estimation from AVO inversion. Ph.D. thesis, University of Calgary
Downton JE, Roure B (2015) Interpreting azimuthal Fourier coefficients for anisotropic and fracture parameters. Interpretation 3:ST9–ST27. https://doi.org/10.1190/INT-2014-0235.1
Downton JE, Roure B, Hunt L (2011) Azimuthal Fourier coefficients. CSEG Rec 36:22–36
Dutta NC (2002) Geopressure prediction using seismic data: Current status and the road ahead. Geophysics 67:2012–2041. https://doi.org/10.1190/1.1527101
Eaton BA (1972) The effect of overburden stress on geopressure prediction from well logs. J Pet Technol 24:929–934. https://doi.org/10.2118/3719-PA
Far ME, Sayers CM, Thomsen L, Han D, Castagna JP (2013) Seismic characterization of naturally fractured reservoirs using amplitude versus offset and azimuth analysis. Geophys Prospect 61:427–447. https://doi.org/10.1111/1365-2478.12011
Flemings PB, Stump BB, Finkbeiner T, Zoback M (2002) Flow focusing in overpressured sandstones: theory, observations, and applications. Am J Sci 302:827–855. https://doi.org/10.2475/ajs.302.10.827
Galvin RJ, Gurevich B, Sayers CM (2007) Fluid-dependent shear-wave splitting in a poroelastic medium with conjugate fracture sets. Geophys Prospect 55:333–343. https://doi.org/10.1111/j.1365-2478.2007.00593.x
Gassmann F (1951) Uber die elastizitat poroser medien. Vierteljahrsschrift Der Naturforschenden Gesellschaft in Zurich 96:1–23
Goodway B, Perez M, Varsek J, Abaco C (2010) Seismic petrophysics and isotropic—anisotropic AVO methods for unconventional gas exploration. Lead Edge 29:1500–1508. https://doi.org/10.1190/1.3525367
Gray D, Todorovic-Marinic D (2004) Fracture detection using 3D azimuthal AVO. CSEG Rec 29(10):5–8
Gray D, Anderson P, Logel J, Delbecq F, Schmidt D, Schmid R (2012) Estimation of stress and geomechanical properties using 3D seismic data. First Break. https://doi.org/10.3997/1365-2397.2011042
Gurevich B (2003) Elastic properties of saturated porous rocks with aligned fractures. J Appl Geophys 54:203–218
Gurevich B, Brajanovski M, Galvin RJ, Müller TM, Toms-Stewart J (2009) P-wave dispersion and attenuation in fractured and porous reservoirs—Poroelsticity approach. Geophys Prospect 57:225–237. https://doi.org/10.1016/j.jappgeo.2002.11.002
Gutierrez MA, Braunsdor NR, Couzens BA (2006) Calibration and ranking of porepressure prediction models. Lead Edge 25:1516–1523. https://doi.org/10.1190/1.2405337
Han D, Batzle ML (2004) Gassmann’s equation and fluid-saturation effects on seismic velocities. Geophysics 69(2):398–405. https://doi.org/10.1190/1.1707059
Han T, Pervukhina M, Clennell MB, Dewhurst DN (2017) Model-based porepressure prediction in shales: an example from the Gulf of Mexico, North America. Geophysics 82:M37–M42. https://doi.org/10.1190/geo2016-0504.1
Huang L, Stewart R, Sil S, Dyaur N (2015) Fluid substitution effects on seismic anisotropy. J Geophys Res Solid Earth 120:850–863. https://doi.org/10.1002/2014JB011246
Hudson JA, Pointer T, Liu E (2001) Effective-medium theories for fluid-saturated materials with aligned cracks. Geophys Prospect 49:509–522. https://doi.org/10.1046/j.1365-2478.2001.00272.x
Li L, Zhang J, Pan X, Zhang G (2020) Azimuthal elastic impedance-based Fourier coefficient variation with angle inversion for fracture weakness. Pet Sci 17:86–104. https://doi.org/10.1007/s12182-019-00405-0
Liu E, Martinez A (2013) Seismic fracture characterization: concepts and practical application. Academic Press
Lynn HB, Simon KM, Bates CR, Layman M, Schneider R, Jones M (1995) Use of anisotropy in P-wave and S-wave data for fracture characterization in a naturally fractured gas reservoir. Lead Edge 14:887–893. https://doi.org/10.1190/1.1437179
Martins JL (2006) Elastic impedance in weakly anisotropic media. Geophysics 71:D73–D83. https://doi.org/10.1190/1.2195448
Nelson RA (2001) Geologic analysis of naturally fractured reservoirs. Gulf Publishing Company, Houston. https://doi.org/10.2118/15627-PA
Neves FA, Al-Marzoug A, Kim JJ, Nebrija EL (2003) Fracture characterization of deep tight sands using azimuthal velocity and AVO seismic data in Saudi Arabia. Lead Edge 22:469–475. https://doi.org/10.1190/1.1579581
Nicoletis L, Svay-Lucas J, Prigent H (1998) True amplitude pre-stack imaging of converted waves. In: SEG expanded abstracts, 68th annual conference of the society of exploration geophysicists. New Orleans, pp 734–737. https://doi.org/10.1190/1.1820571
Nur A, Byerlee JD (1971) An exact effective stress law for elastic deformation of rock with fluids. J Geophys Res 76:6414–6419. https://doi.org/10.1029/JB076i026p06414
Pan X, Zhang G (2019) Amplitude variation with incident angle and azimuth inversion for Young’s impedance, Poisson’s ratio and fracture weaknesses in shale gas reservoirs. Geophys Prospect 67:1898–1911
Pan X, Zhang G, Yin X (2017) Azimuthally anisotropic elastic impedance inversion for fluid indicator driven by rock physics. Geophysics 82:C211–C227
Pan X, Zhang G, Chen H, Yin X (2018a) Elastic impedance parameterization and inversion for fluid modulus and dry fracture quasi-weaknesses in a gas-saturated reservoir. J Nat Gas Sci Eng 49:194–212. https://doi.org/10.1016/j.jngse.2017.10.020
Pan X, Zhang G, Yin X (2018b) Azimuthal seismic amplitude variation with offset and azimuth inversion in weakly anisotropic media with orthorhombic symmetry. Surv Geophys 39:99–123. https://doi.org/10.1007/s10712-017-9434-2
Sayers CM (2009) Seismic characterization of reservoirs containing multiple fracture sets. Geophys Prospect 57:187–192. https://doi.org/10.1111/j.1365-2478.2008.00766.x
Sayers CM (2010) Geophysics under stress: geomechanical applications of seismic and borehole acoustic waves. 2010 distinguished instructor short course. https://doi.org/10.1190/1.9781560802129.
Sayers CM, Dean S (2001) Azimuth-dependent AVO in reservoirs containing non-orthogonal fracture sets. Geophys Prospect 49:100–106. https://doi.org/10.1046/j.1365-2478.2001.00236.x
Sayers CM, Johnson GM, Denyer G (2002) Predrill pore-pressure prediction using seismic data. Geophysics 67:1286–1292. https://doi.org/10.1190/1.1500391
Schoenberg MA, Sayers CM (1995) Seismic anisotropy of fractured rock. Geophysics 60:204–211. https://doi.org/10.1190/1.1443748
Shaw RK, Sen MK (2004) Born integral, stationary phase and linearized reflection coefficients in weak anisotropic media. Geophys J Int 158:225–238. https://doi.org/10.1111/j.1365-246X.2004.02283.x
Shaw RK, Sen MK (2006) Use of AVOA data to estimate fluid indicator in a vertically fractured medium. Geophysics 71:C15–C24. https://doi.org/10.1190/1.2194896
Sil S, Sen MK, Gurevich B (2011) Analysis of fluid substitution in a porous and fractured medium. Geophysics 76:WA157–WA166. https://doi.org/10.1190/1.3564954
Sone H, Zoback MD (2013a) Mechanical properties of shale-gas reservoir rocks—Part 1: static and dynamic elastic properties and anisotropy. Geophysics 78:D381–D392. https://doi.org/10.1190/geo2013-0050.1
Sone H, Zoback MD (2013b) Mechanical properties of shale-gas reservoir rocks—Part 2: ductile creep, brittle strength, and their relation to the elastic modulus. Geophysics 78:D393–D402. https://doi.org/10.1190/GEO2013-0051.1
Swarbrick R (2012) Review of pore-pressure prediction challenges in high-temperature areas. Lead Edge 31:1288–1294. https://doi.org/10.1190/tle31111288.1
Tang X (2011) A unified theory for elastic wave propagation through porous media containing cracks—An extension of Biot’s poroelastic wave theory. Sci China Earth Sci 41:784–795. https://doi.org/10.1007/s11430-011-4245-7
Tang X, Chen X, Xu X (2012) A cracked porous medium elastic wave theory and its application to interpreting acoustic data from tight formations. Geophysics 77:D245–D252. https://doi.org/10.1190/geo2012-0091.1
Terzaghi K (1923) Die Berechnung der Durchlassigkeitsziffer des Tones aus dem Verlauf der hydrodynamischen Spannungserscheinungen. Akademie der Wissenschaften in Wien, Sitzungsberichte, Mathematisch-naturwissenschaftliche Klasse 132:125–138
Thompson M, Willis JR (1991) A reformulation of the equations of anisotropic poroelasticity. J Appl Mech ASME 58:612–616. https://doi.org/10.1115/1.2897239
Thomsen L (1995) Elastic anisotropy due to aligned cracks in porous rock. Geophys Prospect 43:805–829. https://doi.org/10.1111/j.1365-2478.1995.tb00282.x
Warpinski N, Smith M (1989) Rock mechanics and fracture geometry in recent advances in hydraulic fracturing. SPE Monograph 12:57–80
Xue J, Gu H, Cai C (2017) Model-based amplitude versus offset and azimuth inversion for estimating fracture parameters and fluid content. Geophysics 82:M1–M17. https://doi.org/10.1190/geo2016-0196.1
Zhang G, Li L, Pan X, Li H, Liu J, Han L (2020) Azimuthal Fourier coefficient inversion for horizontal and vertical fracture characterization in weakly orthorhombic media. Geophysics 85:C199–C214. https://doi.org/10.1190/geo2019-0797.1
Zoback MD (2007) Reservoir geomechanics. Cambridge University Press, Cambridge, United Kingdom. https://doi.org/10.1017/CBO9780511586477
Zong Z, Yin X, Wu G (2012) AVO inversion and poroelasticity with P- and S-wave modulus. Geophysics 77:N17–N24. https://doi.org/10.1190/geo2011-0214.1
Acknowledgements
We would like to express our gratitude for the sponsorship of the National Natural Science Foundation of China (No.42074136, No.U19B2008, No.42004107), Natural Science Foundation of Hunan Province (No.2021JJ30814), CNPC Prospective and Fundamental Project (No.2021DJ06-06), the Postgraduate Innovation Project in China University of Petroleum (East China) (No.YCX2021016), and the Project of Innovation-driven Plan in Central South University (No.2020CX0012) for their funding this research. We also gratefully appreciate CGG’s university grant program for providing Jason software.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, L., Zhang, G., Pan, X. et al. Estimating Effective Stress Parameter and Fracture Parameters in Shale-Gas Fractured Reservoirs Using Azimuthal Fourier Coefficients. Surv Geophys 42, 1377–1400 (2021). https://doi.org/10.1007/s10712-021-09671-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10712-021-09671-3