Abstract
Lamellar sodium-montmorillonite (NaMMT)
was used as reinforcing filler to improve the abrasion resistance of polyethersulfone (PES)/polytetrafluoroethylene (PTFE)-based polymers. As filler, the interlayer distance of NaMMT was decreased from 1.523 to 0.995 nm, resulting from the evaporation of interlayer water during the heat treating of composites. The abrasion resistance of PES/PTFE-based composite was effectively improved by introducing NaMMT, attributing to the load bearing of NaMMT on the worn surface. The polymer sample with 20 wt% NaMMT exhibited the best anti-wear performance, which is ascribed to its densification worn morphology. In addition, unlike the pure PTFE transfer films formed for the PTFE and PES/PTFE compounds, NaMMT is also involved in the PTFE transfer film of NaMMT/PES/PTFE compounds. It is inferred that the self-lubricating property of PTFE transfer film is destroyed because of the introduction of NaMMT, leading to that the friction coefficient of NaMMT/PES/PTFE compounds was a little larger than those of PTFE and PES/PTFE compounds.
Similar content being viewed by others
Data Availability
All data generated or analyzed during this study are included in the manuscript.
References
Mubashshir, M., Shaukat, A.: The role of grease composition and rheology in elastohydrodynamic lubrication. Tribol. Lett. 67, 104 (2019)
Kazemi-Khasragh, E., Bahari-Sambran, F., Platzer, C., Eslami-Farsani, R.: The synergistic effect of graphene nanoplatelets–montmorillonite hybrid system on tribological behavior of epoxy-based nanocomposites. Tribol. Int. 151, 106472 (2020)
Mohammed, A.S., Ali, A.B.: Investigating the effect of water uptake on the tribological properties of organoclay reinforced uhmwpe nanocomposites. Tribol. Lett. 62, 2 (2016)
Xiao, H., Liu, S., Wang, D.: Tribological properties of sliding shale rock–alumina contact in hydraulic fracturing. Tribol. Lett. 62, 20 (2016)
Lin, Y., Qin, J., Chen, R., Lu, F., Lu, L.: Time-resolved dynamic friction testing of a polyurethane foam against a polymer/clay nano-composite under impact loading. Tribol. Lett. 56, 37–45 (2014)
Esteves, M., Ramalho, A., Ferreira, J.A.M., Nobre, J.P.: Tribological and mechanical behaviour of epoxy/nanoclay composites. Tribol. Lett. 52, 1–10 (2013)
Hu, H., Huang, Z., Chen, Y., Wang, C., Yu, S.: Tribological behavior of polyamide 66-based binary and ternary nanocomposites. Tribol. Lett. 48, 263–269 (2012)
Guo, F., Zhang, Z., Zhang, H., Liu, W.: Tribological behavior of Kevlar fabric composites filled with nanoparticles. J. Appl. Polym. Sci. 111, 2419–2425 (2010)
Mu, B., Wang, Q., Wang, T., Wang, H., Pei, X.: Preparation and friction properties of PBT/MMT composites. Polym. Compos. 30, 619–628 (2010)
Sirong, Y., Zhongzhen, Y., Yiu-Wing, M.: Effects of SEBS-g-MA on tribological behaviour of nylon 66/organoclay nanocomposites. Tribol. Int. 40, 855–862 (2007)
Ali, A.B., Samad, M.A., Merah, N.: UHMWPE hybrid nanocomposites for improved tribological performance under dry and water-lubricated sliding conditions. Tribol. Lett. 65, 102 (2017)
Azam, M.U., Samad, M.A.: A novel organoclay reinforced UHMWPE nanocomposite coating for tribological applications. Prog. Org. Coat. 118, 97–107 (2018)
Wen, J., Yin, P., Zhen, M.: Friction and wear properties of UHMWPE/nano-MMT composites under oilfield sewage condition. Mater. Lett. 62, 4161–4163 (2008)
Zhen, M., Wen, J., Li, Y., Yu, N.: Friction and wear properties of PTFE and UHMWPE filled with nano-MMT. J. Mater. Sci. Eng. 24, 410–413 (2006)
Zhang, X., Wang, H., Liu, Z., Zhu, Y., Wu, S., Wang, C., Zhu, Y.: Fabrication of durable fluorine-free superhydrophobic polyethersulfone (PES) composite coating enhanced by assembled MMT-SiO2 nanoparticles. Appl. Surf. Sci. 396, 1580–1588 (2017)
Brostow, W.: Nanocomposites of poly(methyl methacrylate) (PMMA) and montmorillonite (MMT) Brazilian clay: a tribological study. Express Polym. Lett. 4, 570–575 (2010)
Kanny, K., Jawahar, P., Moodley, V.K.: Mechanical and tribological behavior of clay-polypropylene nanocomposites. J. Mater. Sci. 43, 7230–7238 (2008)
Bhuyan, S., Sundararajan, S., Lu, Y., Larock, R.: A study of the physical and tribological properties of biobased polymer-clay nanocomposites at different clay concentrations. Wear 268, 797–802 (2010)
Lam, C.K., Lau, K.T.: Tribological behavior of nanoclay/epoxy composites. Mater. Lett. 61, 3863–3866 (2007)
Mohan, T.P., Kanny, K.: Tribological properties of nanoclay infused banana fiber (NC-BF) reinforced epoxy composites. J. Tribol. 141, 1 (2019)
Kazemi-Khasragh, E., Bahari-Sambran, F., Platzer, C., Eslami-Farsani, R.: The synergistic effect of graphene nanoplatelets-montmorillonite hybrid system on tribological behavior of epoxy-based nanocomposites. Ttribol. Int. 151, 106472 (2020)
Ha, S.R., Rhee, K.Y., Shin, H.: Effect of MMT concentration on tribological behavior of MMT/epoxy nanocomposite. J. Nanosci. Nanotechnol. 8, 4869 (2008)
Yi, H., Hu, M., Yao, D., Wei, T., Lin, H., Zheng, B.: Organic/inorganic hybrid nanostructured composites of liquid nitrile rubber-based quaternary ammonium salt-modified montmorillonite and epoxy resin: preparation and tribological behaviors. Polym. Compos. 41, 1711–1720 (2020)
Lingaraju, D., Ramji, K., Devi, M.P., Lakshmi, U.R.: Mechanical and tribological studies of polymer hybrid nanocomposites with nano reinforcements. Bull. Mater. Sci. 34, 705 (2011)
Kumar, M.S.S., Raju, N.M.S., Sampath, P.S., Vivek, U.: Tribological analysis of nano clay/epoxy/glass fiber by using Taguchi’s technique. Mater. Des. 70, 1–9 (2015)
Mohan, T.P., Kanny, K.: Tribological studies of nanoclay filled epoxy hybrid laminates. Tribol. Trans. 60, 681–692 (2017)
Yi, H., Hu, M., Yao, D., Lin, H., Zheng, B.: Tribological and thermomechanical properties of epoxy-matrix nanocomposites containing montmorillonite nanoclay intercalated with polybutadiene-based quaternary ammonium salt. Plast. Rubber Compos. 49, 389–399 (2020)
Zhang, G., Ke, Y., He, J., Qin, M., Shen, H., Lu, S., Xu, J.: Effects of organo-modified montmorillonite on the tribology performance of bismaleimide-based nanocomposites. Mater. Des. 86, 138–145 (2015)
Nie, H.W., Zhou, Y.K., Yang, L., Cao, Y.: Influence on friction material performance of nano-MMT composites of PF by in situ method. Key Eng. Mater. 609, 8–13 (2014)
Fan, B., Yang, Y., Feng, C., Ma, J., Tang, Y., Dong, Y.: Tribological properties of fabric self-lubricating liner based on organic montmorillonite (OMMT) reinforced phenolic (PF) nanocomposites as hybrid matrices. Tribol. Lett. 57, 22 (2015)
Wang, Z., Xia, Y., Liu, Z.: Study the sensitivity of solid lubricating additives to attapulgite clay base grease. Tribol. Lett. 42, 141–148 (2011)
Cao, Y., Yang, T., Zhang, D., Wang, Q., Guo, X.: Friction mechanism of nano-MMT/In composite on steel ball higher pair. Chem. Eng. Trans. 46, 1177–1182 (2015)
Cao, Y., Yang, T., Zhang, D., Wang, Q., Guo, X.: Tribological properties of nano-MMT/In lubricant additive on steel-bronze tribo-pair. Chem. Eng. Trans. 46, 1171–1176 (2015)
Nie, H., Zhou, Y., Yang, L., Zhu, W.: A Study on the preparation of montmorillonite/Cu nanocomposite and their tribological performance. Lubr. Eng. 39, 38–42 (2014)
Yu, C., Ke, Y., Hu, X., Zhao, Y., Deng, Q., Lu, S.: Effect of bifunctional montmorillonite on the thermal and tribological properties of polystyrene/montmorillonite nanocomposites. Polymers-Basel 11, 834 (2019)
Pena-Paras, L., Maldonado-Cortes, D., Castillo, F., Leal, J., Garza, S.: Application of nanoclay lubricants for lowering wear of tools for steel meshing—a case study. IOP Conf. Ser. Mater. Sci. Eng. 400, 072004 (2018)
Cao, Z., Xia, Y., Xi, X.: Nano-montmorillonite-doped lubricating grease exhibiting excellent insulating and tribological properties. Friction 5, 219–230 (2017)
Sun, W., Liu, X., Liu, K., Xu, J., Ye, J.: Paradoxical filler size effect on composite wear: filler–matrix interaction and its tribochemical consequences. Tribol. Lett. 68, 131 (2020)
Liang, L., Song, L., Yang, Y., Li, F., Ma, Y.: Tribological properties of polytetrafluoroethylene improved by incorporation of fluorinated graphene with various fluorine/carbon ratios under dry sliding condition. Tribol. Lett. 69, 21 (2021)
Waßmann, O., Ahmed, I.U.: Slippery wood: low friction and low wear of modified beech wood. Tribol. Lett. 68, 53 (2020)
Alam, K.I., Dorazio, A., Burris, D.L.: Polymers tribology exposed: eliminating transfer film effects to clarify ultralow wear of PTFE. Tribol. Lett. 68, 67 (2020)
Zhang, H., Chang, Q.: Fluorine-doped amorphous carbon-coated magnesium silicate hydroxide as lubricant additive and atomic simulation. Tribol. Lett. 69, 11 (2021)
Jiang, Y., Chen, L., Xiao, C., Zhou, N., Qian, L.: Friction and wear behaviors of steel ball against polyimide-ptfe composite under rolling-sliding motion. Tribol. Lett. 69, 100 (2021)
Chen, Z., Wu, Z., Sun, J., Mao, C., Su, F.: Improved load-bearing capacity and tribological properties of PTFE coatings induced by surface texturing and the addition of Go. Tribol. Lett. 69, 47 (2021)
Zuo, Z., Song, L., Yang, Y.: Tribological behavior of polyethersulfone-reinforced polytetrafluoroethylene composite under dry sliding condition. Tribol. Int. 86, 17–27 (2015)
Zuo, Z., Song, L., Yang, Y.: Miscibility analysis of polyethersulfone and polytetrafluoroethylene using the molecular dynamics method. Fiber. Polym. 16, 510–521 (2015)
Zuo, Z., Yang, Y., Qi, X., Su, W., Yang, X.: Analysis of the chemical composition of the PTFE transfer film produced by sliding against Q235 carbon steel. Wear 320, 87–93 (2014)
Chen, Z., Feng, R.: Preparation and characterization of poly(styrene-b-butadiene-b-styrene)/montmorillonite nanocomposites. Polym. Compos. 30, 281–287 (2009)
Katti, K.S., Sikdar, D., Katti, D.R., Ghosh, P., Verma, D.: Molecular interactions in intercalated organically modified clay and clay-polycaprolactam nanocomposites: experiments and modeling. Polymers-Basel 47, 403–414 (2006)
Zhang, X., Loo, L.: Variable-temperature Fourier transform infrared studies of matrix-nanofiller interactions in amorphous polyamide/layered silicate nanocomposites. J. Appl. Polym. Sci. 126, E371–E379 (2012)
Moraes, R.P., Valera, T.S., Demarquette, N.R., Oliveira, P.C., Maria, C.P., Santos, A.M.: Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization. J. Appl. Polym. Sci. 112, 1949–1958 (2009)
Al-Othman, A., Tremblay, A.Y., Pell, W., Letaief, S., Liu, Y., Peppley, B.A., Ternan, M.: A modified silicic acid (Si) and sulphuric acid (S)-ZrP/PTFE/glycerol composite membrane for high temperature direct hydrocarbon fuel cells. J. Power. Sour. 224, 158–167 (2013)
Gohari, R.J., Halakoo, E., Nazri, N., Lau, W.J., Matsuura, T., Ismail, A.F.: Improving performance and antifouling capability of PES UF membranes via blending with highly hydrophilic hydrous manganese dioxide nanoparticles. Desalination 335, 87–95 (2014)
Saxena, N., Prabhavathy, C., De, S., Dasgupta, S.: Flux enhancement by argon–oxygen plasma treatment of polyethersulfone membranes. Sep. Purif. Technol. 70, 160–165 (2010)
Zuo, Z., Jin, X., Li, C., Zhang, Z., Yang, Y.: Chemisorption mechanism of defluorinated fluorine on bcc Fe surface during formation of PTFE transfer film. Appl. Surf. Sci. 567, 150777 (2021)
Acknowledgements
This study was funded by China Postdoctoral Science Foundation (Grant No. 2020M670152).
Funding
This study was funded by China Postdoctoral Science Foundation (Grant No. 2020M670152).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors have no conflicts of interest to declare that are relevant to the content of this article.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zuo, Z., Yang, Y., Song, L. et al. Characterization and Tribological Performance of Polyethersulfone/PTFE Compound Filled with Na-Montmorillonite. Tribol Lett 69, 138 (2021). https://doi.org/10.1007/s11249-021-01513-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11249-021-01513-y