The characteristics of composite materials in the system Al2O3– carbon nanotubes – eutectic additives are investigated. The effect of the content of the reinforcing component as well as high-temperature heat treatment in vacuum on the strength of the material is examined. The obtained samples with 0.4 wt.% carbon tubes had the following characteristics: average tensile strength in three-point bending 380 MPa, open porosity 0.9%, average density 3.71 g/cm3.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
V. Gribachev, “Technology of the production and spheres of application of carbon nanotubes,” Komponenty Tekhnol., No. 12, 135 – 138 (2008).
P. N. Dyachkov, Carbon Nanotubes: Structure, Properties, Applications [in Russian], Binom, Laboratoriya Znanii, Moscow (2006).
N. A. Makarov, Ceramics Based on Al2O3 and the System Al2O3–ZrO2 Modified with the Addition of Eutectics Compositions, Author’s Abstract of Doctoral’s Thesis [in Russian], RKhTU im. D. I. Mendeleeva, Moscow (2011).
A. R. Karaeva, V. Z. Mordkovich, and V. F. Tretyakov, “Obtaining carbon nanofibers and nanotubes by catalytic pyrolysis of methane,” Khim. Tverd. Topl., No. 5, 67 – 83 (2005).
E. G. Rakov, “Obtaining thin carbon nanotubes by catalytic pyrolysis on a carrier,” Usp. Khim., 76(1), 3 – 26 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 6, pp. 16 – 21, June, 2021.
Rights and permissions
About this article
Cite this article
Antonov, D.A., Tarasenko, M.A., Pavlov, S.S. et al. Eutectic-Modified Composite Corundum Ceramic with Reinforcing Carbon Nanotubes. Glass Ceram 78, 226–230 (2021). https://doi.org/10.1007/s10717-021-00384-y
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-021-00384-y