Issue 39, 2021

A nitrogen and sulfur co-doped iron-based electrocatalyst derived from iron and biomass ligand towards the oxygen reduction reaction in alkaline media

Abstract

Research on highly efficient nitrogen and sulfur co-doped carbon materials is crucial for the development of Fe-based non-noble metal electrocatalysts (NNMEs) as alternatives to platinum-group metal-based electrocatalysts for the oxygen reduction reaction (ORR) in fuel cells. In this work, complexes were derived from iron salt and biomass ligands, subsequently mixed with active carbon nanoparticles (NPs) and pyrolyzed at 800 °C to obtain the resulting electrocatalysts Fe/NSC (800) and Fe/NC (800). Through screening the synthetic parameters, it was found that the N and S co-decorated Fe-based electrocatalyst of Fe/NSC (800) displays better ORR performances in terms of the onset potential (Eonset) and the half-wave potential (E1/2) than those of the Fe-free electrocatalyst of NSC (800) and the N-doped electrocatalyst of Fe/NC (800). The improved ORR activity can be mainly ascribed to the FeN4 active sites, as well as the additional S-doping within the carbon matrixes. Additionally, Fe/NSC (800) displays good durability superior to that of 20 wt% Pt/C in 0.1 M KOH solution. This synthetic approach is beneficial for the synthesis of NNMEs with biomass ligands for boosting the ORR performances in an alkaline solution.

Graphical abstract: A nitrogen and sulfur co-doped iron-based electrocatalyst derived from iron and biomass ligand towards the oxygen reduction reaction in alkaline media

Article information

Article type
Paper
Submitted
08 Jun 2021
Accepted
28 Aug 2021
First published
31 Aug 2021

Dalton Trans., 2021,50, 13943-13950

A nitrogen and sulfur co-doped iron-based electrocatalyst derived from iron and biomass ligand towards the oxygen reduction reaction in alkaline media

H. Zhao, L. Chen, Y. Xu, H. Wang, J. Li, Y. Xie and L. Wang, Dalton Trans., 2021, 50, 13943 DOI: 10.1039/D1DT01873F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements