We study the corrosion behaviors of electrolytic composite coatings based on ternary cobalt alloys under different conditions and analyze the distribution of metals over the thickness of the coating and the parameters of their surface roughness. The accumulated results show that, in alkaline and neutral media, the corrosion potentials shift in the negative direction as compared with the potentials measured in an acid media but corrosion resistance does not undergo any significant changes. This can be explained by the fact that tungsten and molybdenum oxides formed on the surface are unstable in alkaline media. In view of the fact that in neutral solutions, the subsurface layer becomes alkaline due to the reduction of oxygen and chlorides provoke local fractures of the protective film, we can assert that alloying metals exert a synergistic effect on the rate of corrosion of the composites. According to the computed values of the depth indicator of corrosion rate, the analyzed coatings can be referred to the group of highly resistant, whereas the composites based on Co64Mo33Zr3 alloy in neutral and alkaline media belong to the group of very stable materials. This opens wide possibilities for their application as protective coatings on metals in aggressive media.
Similar content being viewed by others
References
V. V. Kuznetsov, Z. V. Bondarenko, T. V. Pshenichkina, N. V. Morozova, and V. N. Kudryavtsev, “Electrodeposition of cobalt–molybdenum alloy,” Elektrokhimiya, 43, No. 3, 367–372 (2007).
M. V. Ved, N. D. Sakhnenko, I. Y. Yermolenko, and T. A. Nenastina, “Nanostructured functional coatings of Iron family metals with refractory elements, Chapter 1,” in: O. Fesenko and L. Yatsenko (editors), Nanochemistry, Biotechnology, Nanomaterials, and Their Applications, Springer (2018), pp. 3–34.
S. Valizadeh, E. Svedberg, and P. Leisner, “Electrodeposition of compositionally modulated Au/Co alloy,” J. Appl. Electrochem., 32, 97–104 (2002).
М. Sakhnenko, М. Ved’, I. Ermolenko, Y. Hapon, and M. Kozyar, “Design, synthesis, and diagnostics of functional galvanic coatings made of multicomponent alloys,” Fiz.-Khim. Mekh. Mater., 52, No. 5, 71–76 (2016); English translation: Mater. Sci., 52, No. 5, 680–686 (2017).
S. Sun, T. Bairachna, and E. J. Podlaha, “Induced codeposition behavior of electrodeposited NiMoW alloys,” J. Electrochem. Soc., 160, 434–440 (2013).
J. M. Huang, Y. Li, G. F. Zhang, X. D. Hou, and D. W. Deng, “Electroplating of Ni–ZrO2 nanocomposite coatings on 40CrNiMo7 alloy,” Surf. Eng., 29, 194–199 (2013).
M. Mulukutla, A. Singh, and S. P. Harimkar, “Microstructure and wear behaviour of pulse electrodeposited alumina nanoparticle reinforced Co–W nanocomposite coatings,” Int. J. Surf. Eng. Coatings, 90, 316–323 (2012).
N. Kobayashi, Introduction to Nanotechnology [Russian translation], BINOM (2005).
G. Yar-Mukhamedova, M. Ved’, N. Sakhnenko, and T. Nenastina, “Electrodeposition and properties of binary and ternary cobalt alloys with molybdenum and tungsten,” Appl. Surf. Sci., 445, 298–307 (2018).
N. D. Sakhnenko, M. V. Ved, Y. K. Hapon, and T. A. Nenastina, “Functional coatings of ternary alloys of cobalt with refractory metals,” Rus. J. Appl. Chem., 88, 1941–1945 (2015).
R. Garcia and R. Perez, “Dynamic atomic force microscopy methods,” Surf. Sci. Rep., 47, 197–301 (2002).
G. Yar-Mukhamedova, N. Sakhnenko, M. Ved, I. Yermolenko, and S. Zyubanova, “Surface analysis of Fe–Co–Mo electrolytic coatings,” IOP Conf. Series: Mater. Sci. Eng., 213, 012–019 (2017).
M. V. Ved’, M. D. Sakhnenko, O. V. Bohoyavlens’ka, and T. O. Nenastina, “Modeling of the surface treatment of passive metals,” Fiz.-Khim. Mekh. Mater., 44, No. 1, 69–75 (2008); English translation: Mater. Sci., 44, No. 1, 79–86 (2008).
I. Yu. Yermolenko, M. V. Ved’, N. D. Sakhnenko, L. P. Fomina, and I. G. Shipkova, “Galvanic ternary Fe–Co–W coatings: structure, composition, and magnetic properties,” Funct. Mater., 25, 274–281 (2018).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Fizyko-Khimichna Mekhanika Materialiv, Vol. 56, No. 5, pp. 52–58, September–October, 2020.
Rights and permissions
About this article
Cite this article
Nenastina, Т.О., Ved, M.V., Sakhnenko, M.D. et al. Corrosion Resistance of Composite Coatings Based on the Alloys of Cobalt With Refractory Metals. Mater Sci 56, 634–641 (2021). https://doi.org/10.1007/s11003-021-00475-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11003-021-00475-9