Correction to: Int J Mater Form
The article “Reduced order modeling of selective laser melting: from calibration to parametric part distortion”, written by Chady Ghnatios, Khalil El Rai, Nicolas Hascoet, Pierre-Adrien Pires, Jean-Louis Duval, Jon Lambarri, Jean-Yves Hascoet, Francisco Chinesta was originally published electronically on the publisher’s internet portal on 31 March 2021 without open access. With the author(s)’ decision to opt for Open Choice the copyright of the article changed on 15 June 2021 to © The Author(s) 2021 and the article is forthwith distributed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/10.1007/s12289-021-01613-z
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ghnatios, C., El Rai, K., Hascoet, N. et al. Correction to: reduced order modeling of selective laser melting: from calibration to parametric part distortion. Int J Mater Form 14, 987 (2021). https://doi.org/10.1007/s12289-021-01638-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12289-021-01638-4