Abstract
The relationship between abrasive wear and physical and mechanical properties of cast polyurethane and polyurethane urea elastomers based on polyester P-6BA was studied in a wide range of variation of their elastic properties.
Similar content being viewed by others
REFERENCES
Yilgör, I., Yilgör, E., and Wilkes, G.L., Critical parameters in designing segmented polyurethanes and their effect on morphology and properties: A comprehensive review, Polymer, 2015, vol. 58, pp. 1–36.
Prisacariu, C., Polyurethane Elastomers: From Morphology to Mechanical Aspects, Springer Science & Business Media, 2011.
Sonnenschein, M.F., Polyurethanes: Science, Technology, Markets, and Trends, New Jersey: Wiley, 2014.
Fukahori, Y. and Yamazaki, H., Mechanism of rubber abrasion part 3: How is friction linked to fracture in rubber abrasion? Wear, 1995, vol. 188, nos. 1–2, pp. 19–26.
Uchiyama, Y., Studies on the friction and wear of rubbers. Part I: Influence of mechanical properties on the abrasive wear of rubbers, Int. Polym. Sci. Technol., 1984, vol. 11, pp. 74–80.
Bartenev, G.M. and Lavrentev, V.V., Friction and Wear of Polymers, Amsterdam: North-Holland, 1981.
Senichev, V.Y., and Pogoreltsev, E.V., The relationship between abrasive wear behavior and chemical structure of polyurethane urea elastomers, J. Phys.: Conf. Ser., 2019, vol. 1399, art. ID 044006.
Htun, T.K., Lyamkin, D.I., Shumskaya, A.N., and Vasil’ev, N.S., The role of domain structure in the development of thermomechanical and fatigue properties of microcellular polyurethanes, Polym. Sci., Ser. A, 2007, vol. 49, pp. 697–701. https://doi.org/10.1134/S0965545X07060107
Kabacoff, R.I., R in Action: Data Analysis and Graphics with R, New York: Manning, 2012.
Anisimov, V.N. et al., Effect of rigid blocks on the mechanical characteristics and abrasive resistance of polyurethanes, Mater. Sci., 2002, vol. 38, no. 1, pp. 95–98.
Semenets, A.A. and Anisimov, V.N., Development of triboengineering composite materials based on thermoplastic polyurethanes, J. Frict. Wear, 2010, vol. 31, no. 3, pp. 208–213. https://doi.org/10.3103/S1068366610030098
Kuzyaev, I.M. and Anisimov, V.N., Investigation of physical and mechanical properties of polymer composite materials based on polyurethanes, Vopr. Khim. Khim. Tekhnol., 2012, no. 2, pp. 81–89.
Portnov, S.V., Podkol’zina, L.V., and Yakovlev, S.N., Main type of wear of modern constractive polyurethane, Sborka Mashinostr. Priborostr., 2016, no. 12, pp. 40–44.
ACKNOWLEDGMENTS
This work was carried out using the equipment of the Center for Joint Use Research of Materials and Substances at the Perm Federal Research Center of the Ural Branch of the Russian Academy of Sciences.
Funding
This work was carried out within the framework of a state assignment to the Institute of Technical Chemistry of the Ural Branch of the Russian Academy of Sciences, theme no. AAAA-A18-118022290056-8.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by G. Levit
Rights and permissions
About this article
Cite this article
Senichev, V.Y., Pogorel’tsev, E.V., Slobodinyuk, A.I. et al. Relationship between Abrasive Wear of Urethane-Containing Elastomers and Their Physical and Mechanical Properties. Inorg. Mater. Appl. Res. 12, 1100–1103 (2021). https://doi.org/10.1134/S2075113321040377
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113321040377