Correction to: The International Journal of Advanced Manufacturing Technology (2020) 111:2163–2170

https://doi.org/10.1007/s00170-020-06264-z

The article “Experimental investigation into material removal mechanisms in High Speed Wire EDM”, written by Kai Oßwald, Lukas Brandl and Ingo Lochmahr, was originally published Online First without Open Access. After publication in volume 111, issue 7–8, page 2163–2170 the author decided to opt for Open Choice and to make the article an Open Access publication. Therefore, the copyright of the article has been changed to ©The Author(s) 2021 and the article is forthwith distributed under the terms of the Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0.