An energy-saving technology for irisation of glass articles by using a high-temperature plasma torch was developed. The effect of the outflow of the plasma-forming gas on the intensity of heating of the glass was investigated. An installation for irisation of glassware was developed. The optimal process parameters of the irisation of glass articles were determined.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Yu. A. Guloyan, Decorative Processing of Glass and Glasswares [in Russian], Vyssh. Shkola, Moscow (1984).
O. L. Al’takh and P. D. Sarkisov, Grinding and Polishing of Glass and Glass Articles [in Russian], Vyssh. Shkola, Moscow (1988).
GOST R 56407–2015, Lean Production. Basic Methods and Tools [in Russian], Standartinform, Moscow (2016).
N. I. Min’ko, V. S. Bessmertnyi, and P. S. Dyumina, “Use of alternative energy sources in the technology of glass and glass-ceramic materials,” Glass Ceram., 59(3 – 4), 77 – 79 (2002) [Steklo Keram., No. 3, 3 – 5 (2002)].
S. V. Fedoseev, A. M. Ibragimov, L. P. Aksakovskaya, and N. K. Anisimova, “Mathematical modeling of heat transfer during glass cullet fusion on a concrete surface,” Stroit. Mater., No. 9, 12 – 13 (2006).
S. V. Fedoseev, N. K. Anisimova, and Yu. V. Shishkov, “Modeling of high-temperature decoration of concrete,” Vest. MGSU, No. 1, 151 – 155 (2009).
D. O. Bondarenko, V. V. Strokova, T. I. Timoshenko, and I. V. Rozdolskaya, “Plasma-chemical modification of a facing composite material based on glass microspheres with a protective/decorative coating,” Perspekt. Mater., No. 8, 72 – 80 (2018).
N. M. Zdorenko, I. A. Il’yina, N. I. Bondarenko, et al., “Protective/decorative coatings for autoclave-hardened wall building materials,” Mezhd. Zh. Eksp. Obraz., No. 9, 81 – 82 (2015).
I. A. Il’ina, N. I. Min’ko, I. N. Borisov, and D. O. Bondarenko, “Local heat treatment of autoclave-cured wall building materials,” Sovr. Naukoemkie Tekhnol., No. 3, 165 – 166 (2014).
N. M. Zdorenko, N. I. Bondarenko, L. N. Borisov, et al., “Increase of competitiveness of wall construction materials with use of plasma technologies,” International journal of applied and fundamental research, No. 2 (2014). URL: www.sciencesd.com/457-24673
O. V. Puchka, S. S. Vaisera, and S. V. Sergeev, “Plasma-chemical methods of obtaining coatings on the surface of foam glass,” Vest. BGTU im. V. G. Shukhovà, No. 3, 147 – 150 (2013).
E. I. Evtushenko, O. V. Puchka, and S. S. Vaisera, “The plasma-chemical methods of decorating foam glass surface,” Life Sci. J., 11(11s), article No. 22, 95 – 98 (2014).
V. P. Krokhin, V. S. Bessmertnyi, V. A. Panasenko, et al., “Decoration of glass and glass articles using the plasma-spraying method,” Glass Ceram., 56(3 – 4), 78 – 80 (1999) [Steklo Keram., No. 3, 12 – 14 (1999)].
V. S. Bessmertnyi, V. P. Krokhin, V. A. Panasenko, et al., “Plasma rod decorating of household glass,” Glass Ceram., 58(5 – 6), 241 – 215 (2001) [Steklo Keram., No. 6, 21 – 22 (2001)].
O. G. Volokitin, M. A. Sheremet, V. V. Shekhovtsov, et al., “Investigation of convective heat transfer modes in the production of high-temperature silicate melts,” Teplofiz. Aeromekh., 23(5), 789 – 800 (2016).
N. K. Skripnikova, V. V. Shekhovtsov, O. G. Volokitin, and R. E. Gafarov, “Low-temperature plasma in the production technology for glass-crystalline materials,” Bull. Nauki i Praktiki, 4(6), 179 – 183 (2018).
A. S. An’shakov, K. S. Gauss, O. G. Volokitin, and V. V. Shekhovtsov, “Modern technologies for the creation and processing of building materials using the energy of thermal plasma,” Vest. Tomsk. Gos. Arkh.-Stroit. Univ., 20(4), 135 – 144 (2018).
V. S. Bessmertnyi, N. I. Bondarenko, D. O. Bondarenko, et al., “Energy- and resource-saving technology for obtaining decorative coatings on sheet glass,” Glass Ceram., 77(3), 154 – 156 (2020) [Steklo Keram., No. 4, 44 – 47 (2020).
S. V. Fedosov and M. V. Akulova, Plasma Metallization of Concretes [in Russian], ASV Izd., Moscow (2003).
V. S. Bessmertnyi, N. I. Min’ko, N. M. Zdorenko, et al., “Use of alternative energy sources and glass household waste in glazing technology for ceramic facing tile,” Glass Ceram., 77(9 – 10), 390 – 393 (2020) [Steklo Keram., No. 10, 29 – 33 (2020)].
V. S. Bessmertny, N. I. Bondarenko, D. O. Bondarenko, et al., “Method of irisation of high-quality glassware, Pat. 2686790 RF, IPC C03C 17/245, C03C 17/245, C03C 17/2453, C03C2218/153,” Byull. Izobr. Polezn. Modeli, No. 13 (2019), app. 07/18/2018; publ. 04/30/2019.
V. S. Bessmertni, N. M. Zdorenko, and A. O. Samsonova, “Device for irisation of glass articles, Pat. 191710 RF, IPC C03C 17/06, C23C 24/08, C23C 4/134, C03C 17/06, C23C 24/08, C23C 4/134, 2018145558,” Byull. Izobr. Polezn. Modeli, No. 23 (2019), app. 12/21/2018; publ. 08.19.2019.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 4, pp. 26 – 30, April, 2021.
Rights and permissions
About this article
Cite this article
Bessmertnyi, V.S., Zdorenko, N.M., Puchka, O.V. et al. Energy-Saving Technology for Irisation of Glass Articles. Glass Ceram 78, 153–156 (2021). https://doi.org/10.1007/s10717-021-00367-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-021-00367-z