After publication of our article [1], the authors became aware that they had omitted to include the credit line for Fig. 1 [2]. The corrected Fig. 1 caption with the credit line is given below:
“Fig. 1 (a) Photograph of wood-plastic composite samples; (b) photographs of experimental setups used 1) pin on disk, 2) tensile testing, 3) three-point bending, 4) impact, 5) injection molding, 6) effect of weathering [12]. Reprinted from Construction and Building Materials, 172, Thanate Ratanawilai, Kampanart Taneerat, Alternative polymeric matrices for wood-plastic composites: Effects on mechanical properties and resistance to natural weathering, 349–357, Copyright (2018), with permission from Elsevier.”
Article PDF
References
Kumar S, Vedrtnam A, Pawar S J. Effect of wood dust type on mechanical properties, wear behavior, biodegradability, and resistance to natural weathering of wood-plastic composites. Frontiers of Structural and Civil Engineering, 2019, 13(6): 1446–1462
Ratanawilai T, Taneerat K. Alternative polymeric matrices for wood-plastic composites: Effects on mechanical properties and resistance to natural weathering. Construction and Building Materials, 2018, 172: 349–357
Author information
Authors and Affiliations
Corresponding author
Additional information
The original article has been corrected and can be found at https://doi.org/10.1007/s11709-019-0568-9.
Rights and permissions
About this article
Cite this article
Kumar, S., Vedrtnam, A. & Pawar, S.J. Correction to: Effect of wood dust type on mechanical properties, wear behavior, biodegradability, and resistance to natural weathering of wood-plastic composites. Front. Struct. Civ. Eng. 15, 1071 (2021). https://doi.org/10.1007/s11709-021-0736-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11709-021-0736-6