Abstract
The assessment of the vibration strength of elastic metal structures for various purposes is carried out on the basis of mathematical modeling. Proper determining the internal friction coefficient of the metal is of key importance, because this value significantly affects the values of the natural frequencies of damped oscillations and is reflected in the conditions of resonances of various orders. In this article, the internal friction coefficient of the AMg6 aluminum alloy is determined by two methods: electromechanical and laser vibrometry. The dependence of the internal friction coefficient on the fundamental frequency of oscillations in the hertz range is established under the assumption that the isochronous condition is met. The results of this study make it possible to clarify the Voigt hypothesis as applied to the AMg6 alloy in the hertz range.
Similar content being viewed by others
REFERENCES
Frilyander, I.N., Aluminum alloys in aircraft in the periods 1970–2000 and 2001–2015, Tekhnol. Legk. Splavov, 2002, no. 4, p. 12.
Glushak, B.L., Ignatova, O.N., Pushkov, V.A., Novikov, S.A., Girin, A.S., and Sinitsyn, V.A., Dynamic deformation of aluminum alloy AMg6 at normal and higher temperatures, J. Appl. Mech. Tech. Phys., 2000, vol. 41, p. 1083–1086. https://doi.org/10.1023/A:1026662824249
Chuvil’deev, V.N., Gryaznov, M.Yu., Kopylov, V.I., Sysoev, A.N., Ovsyannikov, B.V., and Flyagin, A.A., Mechanical properties of microcrystalline aluminum alloy AMg6, Vestn. Nizhegorod. Univ. im. N.I. Lobachevskogo, 2008, no. 4, p. 35.
Blanter, M.S., Golovin, I.S., Neuhauser, H., and Sinning, H.-R., Internal Friction in Metallic Materials: A Handbook, Berlin: Springer, 2007. https://doi.org/10.1007/978-3-540-68758-0
Blanter, M.S., What is internal friction, Sorosovskii Obraz. Zh., 2004, vol. 8, no. 1, p. 80.
Bezmozgii, I.M., Sofinskii, A.N., and Chernyagin, A.G., Testing the vibration strength of the nodal module of the Russian segment of the International Space Station, Kosm. Tekh. Tekhnol., 2015, no. 3, p. 15.
Sofinskii, A.N., Vibration resistance testing system: Application experience and development prospects, Kosm. Tekh. Tekhnol., 2016, no. 1, p. 12.
Sapozhnikov, K.V., Golyandin, S.N., and Kustov, S.B., Amplitude dependence of the internal friction and Young’s modulus defect of polycrystalline indium, Phys. Solid State, 2010, vol. 52, pp. 43–48.
Arzhavitin, V.M., Amplitude dependence of the internal friction in a Pb-62% Sn alloy, Tech. Phys., 2004, vol . 49, pp. 707–710.
Zoghaib, L. and Mattei, P.-O., Damping analysis of a free aluminum plate, J. Vib. Control, 2015, vol. 21, no. 11, p. 2083. https://doi.org/10.1177/1077546313507098
Sokovikov, M.A., Simonov, M.Yu., Bilalov, D.A., Simonov, Yu.N., and Naimark, O.B., Localization of plastic deformation in the AMg6 alloy under dynamic loading, Fiz. Mezomekh., 2020, vol. 23, no. 2, p. 45. https://doi.org/10.24411/1683-805X-2020-12005
Hanisch, T., Richter, I., and Li, Q., Frictional energy dissipation in a contact of elastic bodies subjected to superimposed normal and tangential oscillations, Phys. Mesomech., 2020, vol. 23, p. 556.https://doi.org/10.1134/S1029959920060119
Tomilin, A.K., Kolebaniya elektromekhanicheskikh sistem s raspredelennymi parametrami (Oscillations of Electromechanical Systems with Distributed Parameters), Ust-Kamenogorsk: Vost.-Kaz. Gos. Tekh. Univ., 2004.
Kuznetsov, F.Yu., Electromagnetic method of frequency analysis of transverse vibrations of a rod, Vestn. Tomsk. Gos. Univ., Mat. Mekh., 2020, no. 66, p. 112. https://doi.org/10.17223/19988621/66/9
Lavrovich, N.I., Natural frequencies of vibrations of rods, Omsk. Nauchn. Vestn., 2000, p. 106.
Funding
The work was partially supported by the Government research assignment for the Institute of Strength Physics and Materials Science, Siberian Branch of the Russian Academy of Sciences (project no. FWRW-2019-0035) and by the competitiveness enhancement program of the National Research Tomsk Polytechnic University.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflict of interest.
Additional information
Translated by S. Avodkova
About this article
Cite this article
Tomilin, A.K., Kuznetsov, F.Y., Konovalenko, I.S. et al. Frequency Dependence of the Internal Friction of the AMg6 Alloy. J. Mach. Manuf. Reliab. 50, 243–250 (2021). https://doi.org/10.3103/S1052618821030158
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618821030158