Skip to main content
Log in

The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation

  • Original Article
  • Published:
Engineering with Computers Aims and scope Submit manuscript

Abstract

In this paper, the bending and buckling analysis of microbeam with the uniform and non-uniform cylindrical cross-section was examined based on the classical beam theory and the modified couple stress theory to model the micro-structures effects. The nonlinear effect of the Von-Kármán theory is regarded to study the large-deflection effect on the buckling of microtubes. The conservation energy principle is used to derive the nonlinear equation of motion and the boundary conditions. The effect of several applicable cross-sections, including the linear, exponential, and convex function, on the static behavior of cylindrical beam is investigated, which is made by the porosity-dependent axially functionally graded material. The homotopy perturbation technique as a semi-analytical solution, coupled with the generalized differential quadrature method, is employed to obtain the nonlinear results. Eventually, the influence of various parameters such as the porosity, volume fraction index, bending load, nonlinear deflection, length-scale effect on the bending deflection, and buckling of microbeam with both clamped and pinned supported are analyzed in details.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15

Similar content being viewed by others

References

  1. Jena SK, Chakraverty S, Malikan M (2020) Application of shifted Chebyshev polynomial-based Rayleigh-Ritz method and Navier’s technique for vibration analysis of a functionally graded porous beam embedded in Kerr foundation. Eng Comput. https://doi.org/10.1007/s00366-020-01018-7

    Article  Google Scholar 

  2. Karami B, Janghorban M, Tounsi A (2019) Galerkin’s approach for buckling analysis of functionally graded anisotropic nanoplates/different boundary conditions. Eng Comput 35:1297–1316

    Article  Google Scholar 

  3. Pham Q-H, Pham T-D, Trinh QV, Phan D-H (2020) Geometrically nonlinear analysis of functionally graded shells using an edge-based smoothed MITC3 (ES-MITC3) finite elements. Eng Comput 36:1069–1082

    Article  Google Scholar 

  4. Ghassabi M, Zarastvand MR, Talebitooti R (2020) Investigation of state vector computational solution on modeling of wave propagation through functionally graded nanocomposite doubly curved thick structures. Eng Comput 36:1417–1433

    Article  Google Scholar 

  5. Ahmadi H (2019) Nonlinear primary resonance of imperfect spiral stiffened functionally graded cylindrical shells surrounded by damping and nonlinear elastic foundation. Eng Comput 35:1491–1505

    Article  Google Scholar 

  6. Abo-Bakr RM, Eltaher MA, Attia MA (2020) Pull-in and freestanding instability of actuated functionally graded nanobeams including surface and stiffening effects. Eng Comput. https://doi.org/10.1007/s00366-020-01146-0

    Article  Google Scholar 

  7. Zine A, Bousahla Abdelmoumen A, Bourada F, Benrahou Kouider H, Tounsi A, Adda Bedia EA, Mahmoud SR, Tounsi A (2020) Bending analysis of functionally graded porous plates via a refined shear deformation theory. Comput Concrete 26:63–74

    Google Scholar 

  8. Guellil M, Saidi H, Bourada F, Bousahla Abdelmoumen A, Tounsi A, Al-Zahrani Mesfer M, Hussain M, Mahmoud SR (2021) Influences of porosity distributions and boundary conditions on mechanical bending response of functionally graded plates resting on Pasternak foundation. Steel Compos Struct 38:1–15

    Google Scholar 

  9. Addou Farouk Y, Meradjah M, Bousahla Abdelmoumen A, Benachour A, Bourada F, Tounsi A, Mahmoud SR (2019) Influences of porosity on dynamic response of FG plates resting on Winkler/Pasternak/Kerr foundation using quasi 3D HSDT. Comput Concrete 24:347–367

    Google Scholar 

  10. Heidari F, Taheri K, Sheybani M, Janghorban M, Tounsi A (2021) On the mechanics of nanocomposites reinforced by wavy/defected/aggregated nanotubes. Steel Compos Struct 38:533–545

    Google Scholar 

  11. Bekkaye Tahar Hacen L, Fahsi B, Bousahla Abdelmoumen A, Bourada F, Tounsi A, Benrahou Kouider H, Tounsi A, Al-Zahrani Mesfer M (2020) Porosity-dependent mechanical behaviors of FG plate using refined trigonometric shear deformation theory. Comput Concrete 26:439–450

    Google Scholar 

  12. Arshid E, Khorasani M, Soleimani-Javid Z, Amir S, Tounsi A (2021) Porosity-dependent vibration analysis of FG microplates embedded by polymeric nanocomposite patches considering hygrothermal effect via an innovative plate theory. Eng Comput. https://doi.org/10.1007/s00366-021-01382-y

    Article  Google Scholar 

  13. Medani M, Benahmed A, Zidour M, Heireche H, Tounsi A, Bousahla Abdelmoumen A, Tounsi A, Mahmoud SR (2019) Static and dynamic behavior of (FG-CNT) reinforced porous sandwich plate using energy principle. Steel Compos Struct 32:595–610

    Google Scholar 

  14. Kaddari M, Kaci A, Bousahla Abdelmoumen A, Tounsi A, Bourada F, Tounsi A, Bedia EAA, Al-Osta Mohammed A (2020) A study on the structural behaviour of functionally graded porous plates on elastic foundation using a new quasi-3D model: bending and free vibration analysis. Comput Concrete 25:37–57

    Google Scholar 

  15. Wu J, Habibi M (2021) Dynamic simulation of the ultra-fast-rotating sandwich cantilever disk via finite element and semi-numerical methods. Eng Comput. https://doi.org/10.1007/s00366-021-01396-6

    Article  Google Scholar 

  16. Wang Z, Yu S, Xiao Z, Habibi M (2020) Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk. Mech Adv Mater Struct. https://doi.org/10.1080/15376494.2020.1824284

    Article  Google Scholar 

  17. Al-Furjan MSH, Habibi M, Ghabussi A, Safarpour H, Safarpour M, Tounsi A (2021) Non-polynomial framework for stress and strain response of the FG-GPLRC disk using three-dimensional refined higher-order theory. Eng Struct 228:111496

    Article  Google Scholar 

  18. Li Y, Li S, Guo K, Fang X, Habibi M (2020) On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach. Eng Comput. https://doi.org/10.1007/s00366-020-01166-w

    Article  Google Scholar 

  19. Dai Z, Zhang L, Bolandi SY, Habibi M (2021) On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses. Compos Struct 263:113599

    Article  Google Scholar 

  20. Al-Furjan MSH, Fereidouni M, Sedghiyan D, Habibi M, Jung DW (2021) Three-dimensional frequency response of the CNT-carbon-fiber reinforced laminated circular/annular plates under initially stresses. Compos Struct 257:113146

    Article  Google Scholar 

  21. Al-Furjan MSH, Samimi-Sohrforozani E, Habibi M, Jung DW, Safarpour H (2021) Vibrational characteristics of a higher-order laminated composite viscoelastic annular microplate via modified couple stress theory. Compos Struct 257:113152

    Article  Google Scholar 

  22. Yang F, Chong ACM, Lam DCC, Tong P (2002) Couple stress based strain gradient theory for elasticity. Int J Solids Struct 39:2731–2743

    Article  MATH  Google Scholar 

  23. Moulton DE, Goriely A (2011) Circumferential buckling instability of a growing cylindrical tube. J Mech Phys Solids 59:525–537

    Article  MathSciNet  MATH  Google Scholar 

  24. Zhang XW, Su H, Yu TX (2009) Energy absorption of an axially crushed square tube with a buckling initiator. Int J Impact Eng 36:402–417

    Article  Google Scholar 

  25. Heidary-Torkamani H, Maalek S (2017) Conceptual numerical investigation of all-steel tube-in-tube buckling restrained braces. J Constr Steel Res 139:220–235

    Article  Google Scholar 

  26. Hsieh H-S, Lin J (2005) Study of the buckling mechanism in laser tube forming. Opt Laser Technol 37:402–409

    Article  Google Scholar 

  27. Huang NC, Pattillo PD (2000) Helical buckling of a tube in an inclined wellbore. Int J Non-Linear Mech 35:911–923

    Article  MATH  Google Scholar 

  28. Nikhare C, Weiss M, Hodgson PD (2017) Buckling in low pressure tube hydroforming. J Manuf Process 28:1–10

    Article  Google Scholar 

  29. Liu J-P, Zhong X-Y, Cheng Z-B, Feng X-Q, Ren G-X (2018) Buckling of a slender rod confined in a circular tube: theory, simulation, and experiment. Int J Mech Sci 140:288–305

    Article  Google Scholar 

  30. Liu J-P, Zhong X-Y, Cheng Z-B, Feng X-Q, Ren G-X (2018) Post-buckling analysis of a rod confined in a cylindrical tube. J Appl Mech 85:071001. https://doi.org/10.1115/1.4039622

    Article  Google Scholar 

  31. Mateus JAS, Tagawa H, Chen X (2019) Buckling-restrained brace using round steel bar cores restrained by inner round steel tubes and outer square steel tube. Eng Struct 197:109379

    Article  Google Scholar 

  32. Nateghi A, Salamat-talab M, Rezapour J, Daneshian B (2012) Size dependent buckling analysis of functionally graded micro beams based on modified couple stress theory. Appl Math Model 36:4971–4987

    Article  MathSciNet  MATH  Google Scholar 

  33. Ilkhani MR, Hosseini-Hashemi SH (2016) Size dependent vibro-buckling of rotating beam based on modified couple stress theory. Compos Struct 143:75–83

    Article  Google Scholar 

  34. Wang Y-G, Lin W-H, Liu N (2015) Nonlinear bending and post-buckling of extensible microscale beams based on modified couple stress theory. Appl Math Model 39:117–127

    Article  MathSciNet  MATH  Google Scholar 

  35. Şimşek M, Reddy JN (2013) A unified higher order beam theory for buckling of a functionally graded microbeam embedded in elastic medium using modified couple stress theory. Compos Struct 101:47–58

    Article  Google Scholar 

  36. Zeighampour H, Shojaeian M (2019) Buckling analysis of functionally graded sandwich cylindrical micro/nanoshells based on the couple stress theory. J Sandw Struct Mater 21:917–937

    Article  Google Scholar 

  37. Wang CM, Zhang YY, Ramesh SS, Kitipornchai S (2006) Buckling analysis of micro- and nano-rods/tubes based on nonlocal Timoshenko beam theory. J Phys D Appl Phys 39:3904–3909

    Article  Google Scholar 

  38. Ghannadpour SAM, Mohammadi B (2010) Buckling analysis of micro- and nano-rods/tubes based on nonlocal Timoshenko beam theory using Chebyshev polynomials. Adv Mater Res 123–125:619–622

    Article  Google Scholar 

  39. Akgöz B, Civalek Ö (2011) Buckling analysis of cantilever carbon nanotubes using the strain gradient elasticity and modified couple stress theories. J Comput Theor Nanosci 8:1821–1827

    Article  MATH  Google Scholar 

  40. Cao Y-P, Zheng X-P, Li B, Feng X-Q (2009) Determination of the elastic modulus of micro- and nanowires/tubes using a buckling-based metrology. Scripta Mater 61:1044–1047

    Article  Google Scholar 

  41. Li L, Hu Y (2015) Buckling analysis of size-dependent nonlinear beams based on a nonlocal strain gradient theory. Int J Eng Sci 97:84–94

    Article  MathSciNet  MATH  Google Scholar 

  42. Wang C, Ru C, Mioduchowski A (2006) Orthotropic elastic shell model for buckling of microtubules. Phys Rev E 74:052901

    Article  Google Scholar 

  43. Das M, Levine AJ, MacKintosh FC (2008) Buckling and force propagation along intracellular microtubules. Europhys Lett 84:18003

    Article  Google Scholar 

  44. Kabir AMR, Inoue D, Afrin T, Mayama H, Sada K, Kakugo A (2015) Buckling of microtubules on a 2D elastic medium. Sci Rep 5:17222

    Article  Google Scholar 

  45. Xiang P, Liew KM (2011) Predicting buckling behavior of microtubules based on an atomistic-continuum model. Int J Solids Struct 48:1730–1737

    Article  MATH  Google Scholar 

  46. Farajpour A, Farokhi H, Ghayesh MH (2019) Mechanics of fluid-conveying microtubes: coupled buckling and post-buckling. Vibration 2:102–115

    Article  MATH  Google Scholar 

  47. Rajasekaran S, Khaniki HB (2017) Bending, buckling and vibration of small-scale tapered beams. Int J Eng Sci 120:172–188

    Article  MathSciNet  MATH  Google Scholar 

  48. Robinson MTA, Adali S (2018) Buckling of nonuniform and axially functionally graded nonlocal Timoshenko nanobeams on Winkler-Pasternak foundation. Compos Struct 206:95–103

    Article  Google Scholar 

  49. Moore ID (1989) Elastic buckling of buried flexible tubes—a review of theory and experiment. J Geotechn Eng 115:340–358

    Article  Google Scholar 

  50. Eldabe NTM, El-Sayed MF, Ghaly AY, Sayed HM (2007) Peristaltically induced transport of a MHD biviscosity fluid in a non-uniform tube. Phys A 383:253–266

    Article  Google Scholar 

  51. Shafiei N, Mousavi A, Ghadiri M (2016) Vibration behavior of a rotating non-uniform FG microbeam based on the modified couple stress theory and GDQEM. Compos Struct 149:157–169

    Article  Google Scholar 

  52. Jiao P, Borchani W, Hasni H, Alavi AH, Lajnef N (2016) Post-buckling response of non-uniform cross-section bilaterally constrained beams. Mech Res Commun 78:42–50

    Article  Google Scholar 

  53. Huang Y, Zhang M, Rong H (2016) Buckling analysis of axially functionally graded and non-uniform beams based on Timoshenko theory. Acta Mech Solida Sin 29:200–207

    Article  Google Scholar 

  54. Totry EM, Altus E, Proskura A (2007) Buckling of non-uniform beams by a direct functional perturbation method. Probab Eng Mech 22:88–99

    Article  Google Scholar 

  55. Huang X, Zhang Y, Moradi Z, Shafiei N (2021) Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube. Eng Comput. https://doi.org/10.1007/s00366-021-01395-7

    Article  Google Scholar 

  56. Yang J, Shen H-S (2002) Vibration characteristics and transient response of shear-deformable functionally graded plates in thermal environments. J Sound Vib 255:579–602

    Article  Google Scholar 

  57. Shafiei N, Kazemi M, Safi M, Ghadiri M (2016) Nonlinear vibration of axially functionally graded non-uniform nanobeams. Int J Eng Sci 106:77–94

    Article  Google Scholar 

  58. He J-H (2002) Modified Lindstedt–Poincare methods for some strongly non-linear oscillations: part I: expansion of a constant. Int J Non-Linear Mech 37:309–314

    Article  MATH  Google Scholar 

  59. He J-H (2002) Modified Lindstedt–Poincare methods for some strongly non-linear oscillations: part II: a new transformation. Int J Non-Linear Mech 37:315–320

    Article  MATH  Google Scholar 

  60. Reddy JN (2011) Microstructure-dependent couple stress theories of functionally graded beams. J Mech Phys Solids 59:2382–2399

    Article  MathSciNet  MATH  Google Scholar 

  61. Reddy JN (2007) Nonlocal theories for bending, buckling and vibration of beams. Int J Eng Sci 45:288–307

    Article  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Shengbin Wu.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hou, F., Wu, S., Moradi, Z. et al. The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation. Engineering with Computers 38 (Suppl 4), 3217–3235 (2022). https://doi.org/10.1007/s00366-021-01456-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00366-021-01456-x

Keywords

Navigation