Skip to main content

Advertisement

Log in

Power electronic transformer design with dual-PWM based on MATLAB/Simulink

  • Published:
Wireless Networks Aims and scope Submit manuscript

Abstract

With the continuous development of new energy power generation and smart grid, Power Electronic Transformer (PET) has a good prospect for development because of its remarkable advantages. Based on the topology of AC/DC/AC, the modulation strategy with dual-PWM (Pulse Width Modulation) is adopted to control the operation of power electronic transformers in this paper. The PET structure consists of three units: importation portion, isolation portion and output portion. Model building and analyzing both at the input and output terminals are achieved step by step. And the simulation of the whole PET system with dual-PWM is accomplished with MATLAB/ Simulink. The simulation results show the control system stability and output voltage regulation precision are improved with feed-forward voltage decoupling vector control system. The correctness and effectiveness of the control strategy are demonstrated through the simulation. PETs play an important role in enhancing power supply reliability for Power Grid and promoting the new energy power generation development.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24

Similar content being viewed by others

References

  1. Wensi, L. (2011). Research on modeling method and control technology of power electronic transformer. Shandong University.

    Google Scholar 

  2. Yisheng, Y., Kaixiang, M., & Shiying, Y. (2019). Large signal modeling and analysis of DC-bus voltage of power electronic transformer applied in electric locomotive. Power System Protection and Control, 47(04), 83–90. https://doi.org/10.7667/PSPC180314

    Article  Google Scholar 

  3. Jiang, D., Wang, Y., Lv, Z., Wang, W., & Wang, H. (2020). An energy-efficient networking approach in cloud services for IIoT networks. IEEE Journal on Selected Areas in Communications, 38(5), 928–941. https://doi.org/10.1109/JSAC.2020.2980919

    Article  Google Scholar 

  4. Feng, Xu., & Jun, J. (2018). Simulation research on improving power quality of power electronic transformer. Electromechanical Information, 36, 4–6.

    Google Scholar 

  5. Jiang, D., Wang, W., Shi, L., & Song, H. (2020). A compressive sensing-based approach to end-to-end network traffic reconstruction. IEEE Transactions on Network Science and Engineering, 7(1), 507–519.

    Article  MathSciNet  Google Scholar 

  6. Xiang-Long, L., You-Bo, L., Chen-Yu, Z., et al. (2019). Coordinating voltage regulation for AC-DC hybrid distribution network with multiple power electronic transformer. Advanced Technology of Electrical Engineering and Energy, 188(02), 38–46.

    Google Scholar 

  7. Jiang, D., Huo, L., & Song, H. (2020). Rethinking behaviors and activities of base stations in mobile cellular networks based on big data analysis. IEEE Transactions on Network Science and Engineering, 7(1), 80–90. https://doi.org/10.1109/TNSE.2018.2861388

    Article  MathSciNet  Google Scholar 

  8. Jiang, D., Wang, Y., Lv, Z., Qi, S., & Singh, S. (2019). Big data analysis based network behavior insight of cellular networks for industry 4.0 applications. IEEE Transactions on Industrial Informatics, 16(2), 1310–1320. https://doi.org/10.1109/TII.2019.2930226

    Article  Google Scholar 

  9. Jiang, D., Huo, L., Lv, Z., Song, H., & Qin, W. (2018). A joint multi-criteria utility-based network selection approach for vehicle-to-infrastructure networking. IEEE Transactions on Intelligent Transportation Systems, 19(10), 3305–3319. https://doi.org/10.1109/TITS.2017.2778939

    Article  Google Scholar 

  10. Tian, Z. (2017). Design of power electronic transformer. Industrial Control Computer, 30(12), 149–150.

    Google Scholar 

  11. Jiang, D., Huo, L., & Li, Y. (2018). Fine-granularity inference and estimations to network traffic for SDN. PLoS ONE, 13(5), 1–23. https://doi.org/10.1371/journal.pone.0194302

    Article  Google Scholar 

  12. Lewicki, A., & Morawiec, M. (2019). The structure and the space vector modulation for a medium voltage power-electronic-transformer based on two seven-level cascade H-bridge inverters. IET Electric Power Applications, 13(10), 1514–1523. https://doi.org/10.1049/iet-epa.2018.5886

    Article  Google Scholar 

  13. Jiang, D., Wang, F., Lv, Z., et al. (2021). QoE-Aware efficient content distribution scheme for satellite-terrestrial networks. IEEE Transactions on Mobile Computing. https://doi.org/10.1109/TMC.2021.3074917

    Article  Google Scholar 

  14. Xing, Z. (2003). Research on PWM rectifier and its control strategy. Hefei University of Technology.

    Google Scholar 

  15. Jiang, D., Wang, Z., Huo, L., et al. (2020). A performance measurement and analysis method for software-defined networking of IoV. IEEE Transactions on Intelligent Transportation Systems, 99, 1–13. https://doi.org/10.1109/TITS.2020.3029076

    Article  Google Scholar 

  16. Shaodi, O., Jinjun, L., Yue, Y., et al. (2019). DC voltage control strategy of three-terminal medium-voltage power electronic transformer-based soft normally open points. IEEE Transactions on Industrial Electronics, 99, 1–1. https://doi.org/10.1109/TIE.2019.2922915

    Article  Google Scholar 

  17. Jiang, D., Zhang, P., Lv, Z., et al. (2016). Energy-efficient multi-constraint routing algorithm with load balancing for smart city applications. IEEE Internet of Things Journal, 3(6), 1437–1447. https://doi.org/10.1109/JIOT.2016.2613111

    Article  Google Scholar 

  18. Jiang, D., Wang, Z., Wang, W., et al. (2021). AI-assisted energy-efficient and intelligent routing for reconfigurable wireless networks. IEEE Transactions on Network Science and Engineering. https://doi.org/10.1109/TNSE.2021.3075428

    Article  Google Scholar 

  19. Qin, H., & Kimbal, J. W. (2013). Solid-state transformer architecture using AC–AC dual-active-bridge converter. IEEE Transaction on Industrial Electronics, 60(9), 3720–3730. https://doi.org/10.1109/tie.2012.2204710

    Article  Google Scholar 

  20. Yang, Y., Pei, W., Deng, W., et al. (2019). Benefit analysis of using multi-port and multi-function power electronic transformer connecting hybrid AC/DC power grids. The Journal of Engineering, 2019(16), 1076–1080. https://doi.org/10.1049/joe.2018.8446

    Article  Google Scholar 

  21. Li jianli, . (2016). Discussion on the control and application of electronic power transformer. Heilongjiang Science and Technology Information, 2016(23), 53.

    Google Scholar 

  22. Jiang, D., Huo, L., Zhang, P., et al. (2020). Energy-efficient heterogeneous networking for electric vehicles networks in smart future cities. IEEE Transactions on Intelligent Transportation Systems, 99, 1–13. https://doi.org/10.1109/TITS.2020.3029015

    Article  Google Scholar 

  23. Geng, Q., & Hu, Y. (2019). Energy storage device locating and sizing based on power electronic transformer. Journal of Engineering, 2019(16), 3164–3168. https://doi.org/10.1049/joe.2018.8773

    Article  Google Scholar 

  24. Wang, Z., Jiang, D., Zhang, Z., et al. (2021). A polymorphic heterogeneous security architecture for edge-enabled smart grid. Sustainable Cities and Society, 67(4), 1–16. https://doi.org/10.1016/j.scs.2020.102661

    Article  Google Scholar 

  25. Gaber, M., El-Banna, S., El-Dabah, M., et al. (2021). Designing and implementation of an intelligent energy management system for electric ship power system based on adaptive Neuro-Fuzzy inference system (ANFIS). Advances in Science Technology and Engineering Systems Journal, 6(2), 195–203. https://doi.org/10.25046/aj060223

    Article  Google Scholar 

  26. Zhao, J. (2003). Simulation of power electronic transformer with constant output voltage. Power System Automation, 2003(18), 30–33.

    Google Scholar 

  27. Guo, S., Mu, Y., Jia, H., et al. (2019). Optimization of AC/DC hybrid distributed energy system with power electronic transformer. Energy Procedia, 2019(158), 6687–6692. https://doi.org/10.1016/j.egypro.2019.01.021

    Article  Google Scholar 

  28. Liu, Z., & Lin, Y. (2008). Design and simulation of power electronic transformer in distributed power generation system. Electrical Applications, 37(06), 82–86.

    Google Scholar 

Download references

Acknowledgements

The authors acknowledge the Jiangsu University Natural Science Research Project (18KJB470024) and Provincial Construction System Science and Technology Project of Jiangsu Provincial Housing and Urban-Rural Construction Department (2018ZD088). This work is partly supported by the Natural Science Foundation of Jiangsu Province of China (No. BK20161165), the applied fundamental research Foundation of Xuzhou of China (No. KC17072). The authorized patents for invention are also the research and development of Jiangsu Province Industry-University-Research Cooperation Project (BY2019056).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Lulu Bei.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fang, E., Bei, L., Mu, Jy. et al. Power electronic transformer design with dual-PWM based on MATLAB/Simulink. Wireless Netw 27, 4375–4387 (2021). https://doi.org/10.1007/s11276-021-02662-7

Download citation

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11276-021-02662-7

Keywords

Navigation