Skip to main content
SpringerLink
Log in

CFD-based Parametric Study of Swirl Effects on Combustion in Industrial Natural Gas Combustor

  • Published:
Journal of Engineering Thermophysics Aims and scope

Abstract

Accurate prediction of the temperature and various species concentrations at combustor exhaust is very important. This work presents numerical investigations of a can-type combustor used in industrial gas turbines for power generation. The methane-air combustion process is investigated using models based on Reynolds-averaged Navier–Stokes (RANS) equations. Enhancement of the mixing of air and fuel streams, which results in better combustion, is numerically investigated using different swirl rates. The investigation explores different combinations of turbulence, combustion, and radiation models to find the best possible combination that could accurately predict the combustion process. The numerical results are validated with the extensive experimental database available in the open literature. A structured grid is used to investigate the effect of different modelling parameters as it turned out to reduce the computational power and simulation time. It is found that a swirl improves the combustion process by forming recirculation zones of different lengths and time scales. The combustion lengths are reduced by the entrainment and rapid mixing of the reactants in the recirculation zones.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

REFERENCES

  1. Garreton, D., and Simonin, O., Aerodynamics of Steady State Combustion Chambers and Furnaces, ASCF Ercoftac CFD Workshop, Chatou, France, 1994.

  2. da Silva, C.V., Franca, F.H.R., and Vielmo, H.A., Analysis of the Turbulent, Non-premixed Combustion of Natural Gas in a Cylindrical Chamber with and without Thermal Radiations, Combust. Sci. Technol., 2007, vol. 179, no. 8, pp. 1605–1630.

  3. Centeno, F.R., Cassol, F., Vielmo, H.A., França, F.H.R., and da Silva, C.V., Comparison of Different WSGG Correlations in the Computation of Thermal Radiation in a 2D Axisymmetric Turbulent Non-Premixed Methane–Air Flame, J. Braz. Soc. Mech. Sci., 2013, vol. 35, no. 4, pp. 419–430.

  4. Ronchetti, B., da Silva, C.V., and Vielmo, H.A., Simulation of Combustion in Cylindrical Chamber, Proc. 18th Int. Congr. Mech. Eng., Ouro Preto, Brazil, 2005.

  5. Pang, Y.S., Law, W.P., Pung, K.Q., and Gimbun, J., A Computational Fluid Dynamics Study of Turbulence, Radiation and Combustion Models for Natural Gas Combustion Burner, Bull. Chem. React. Eng. Catal., 2018, vol. 13, pp. 155–169.

  6. Da Silva, C.V., Segatto, C.A., Paula, A.V.D., and Centeno, F.R., 3D Analysis of Turbulent Non-Premixed Combustion of Natural Gas in a Horizontal Cylindrical Chamber, Proc. 22 nd Braz. Cong. Mech. Eng., Ribeirão Preto, SP, Brazil, 2013.

  7. Parente, A., Galletti, C., and Tognotti, L., Effect of the Combustion Model and Kinetic Mechanism on the MILD Combustion in an Industrial Burner Fed with Hydrogen Enriched Fuels, Int. J. Hydrogen Energy, 2008, vol. 33, pp. 7553–7564.

  8. Magel, H.C., Schnell, U., and Hein, K.R.G., Simulation of Detailed Chemistry in a Turbulent Combustor Flow, Symp. (Int.) Combust., 1996, vol. 26, pp. 67–74.

  9. Derudi, M., Villani, A., and Rota, R., Mild Combustion of Industrial Hydrogen-Containing Byproducts, Ind. Eng. Chem. Res., 2007, vol. 46, no. 21, pp. 6806–6811.

  10. Miroslav, S., Stevanovic, Z., and Belosevic, S., Modeling of Non-Confined Turbulent Flow of Two Coaxial Streams Under Combustion Conditions, Facta Universitatis, Ser. Mech. Engin., 2001, vol. 1, no. 8, pp. 981–988.

  11. Cavaliere, A. and Joannon, M.D., Mild Combustion, Prog. Energy Combust. Sci., 2004, vol. 30, no. 4, pp. 329–366.

  12. Magel, H.C., Schnell, U., and Hein, K.R.G., Modeling of Hydrocarbon and Nitrogen Chemistry in Turbulent Combustor Flows using Detailed Reactions Mechanisms, 3rd Workshop on Modeling of Chemical Reaction Systems, Heidelberg, 1996, pp. 1–10.

  13. Salvador, S., Commandre, J.M., and Kara, Y., Thermal Recuperative Incineration of VOCs: CFD Modeling and Experimental Validation,Appl. Therm. Eng., 2006, vol. 26, pp. 2355–2366.

  14. Beér, J.M., and Chigier, N.A., Combustion Aerodynamics, London: Applied Science Publishers (Elsevier), 1972.

  15. Fluent 6.3 User’s Guide, New Hampshire: Fluent, 2006.

  16. Magnussen, B.F., and Hjertager, B.H., On Mathematical Modeling of Turbulent Combustion with Species Emphasis on Soot Formation and Combustion, Proc. 16th Symp. (Int.) Combust., 1977, vol. 16, pp. 719–729.

  17. Howell, J.R., Mengüç, M.P., and Siegel, R., Thermal Radiation Heat Transfer, CRC Press, 2011.

  18. Gosman, A.D. and Lockwood, F.C., Incorporation of a Flux Model for Radiation into a Finite Difference Procedure for Furnace Calculations,Proc. 14th Symp. (Int.) Combust., 1973, vol. 14, pp. 661–671.

  19. Roache, P.J., Quantification of Uncertainty in Computational Fluid Dynamics, Ann. Rev. Fluid. Mech., 1997, vol. 29, pp. 123–60.

Download references

Author information

Authors and Affiliations

  1. Mechanical Engineering Department, NED University of Engineering and Technology, Karachi, Pakistan

    U. Allauddin, H. R. Ansari, S. S. Ahmed, A. Anjum, H. A. Siddique, M. Y. Ahmed, A. A. Khan, S. S. Khan & M. Salman

  2. Universiti Teknologi Brunei, Darussalam, Brunei

    N. Uddin

Authors
  1. U. Allauddin
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. N. Uddin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. H. R. Ansari
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. S. Ahmed
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. A. Anjum
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. H. A. Siddique
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. M. Y. Ahmed
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. A. A. Khan
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. S. S. Khan
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. M. Salman
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to U. Allauddin.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Allauddin, U., Uddin, N., Ansari, H.R. et al. CFD-based Parametric Study of Swirl Effects on Combustion in Industrial Natural Gas Combustor. J. Engin. Thermophys. 30, 75–102 (2021). https://doi.org/10.1134/S1810232821010082

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S1810232821010082

Search

Navigation