Abstract
The influence of the turning parameters on the surface roughness of composites based on thermally expanded graphite is considered. The dependence of the cutting force on the turning parameters is determined. A formula is proposed for the cutting force on composites based on thermally expanded graphite as a function of the selected machining conditions.
Similar content being viewed by others
REFERENCES
Karavaev, D.M. and Khanov, A.M., Mechanical properties of expanded graphite/silicone resin composites, Proc. 14th Int. Multidisciplinary Scientific GeoConf. (SGEM 2014), Albena, Bulgaria, June 19–25, 2014, Sofia: SGEM, 2014, book 6, vol. 1, pp. 107–112.
Karavaev, D.M., Sirotenko, L.D., and Matygullina, E.V., The tribological properties of expanded graphite/siliconeresin composites, Proc. 14th Int. Multidisciplinary Scientific GeoConf. (SGEM 2014), Albena, Bulgaria, June 19–25, 2014, Sofia: SGEM, 2014, book 6, vol. 1, pp. 185–190.
Karavaev, D.M., Khanov, A.M., Degtyarev, A.I., et al., Anisotropy of the mechanical properties of a composite material based on thermally extended graphite, Izv. Samar. Nauchn. Tsentra, Ross. Akad. Nauk, 2012, vol. 14, no. 4 (5), pp. 1243–1245.
Bez”yazychnyi, V.F., Kordyukov, A.V., Timofeev, M.V., and Fomenko, R.N., Development of a dynamometric system for measuring the cutting force during turning, Izv. Mosk. Gos. Tekh. Univ., MAMI, 2014, vol. 2, no. 1 (19), pp. 171–176.
Funding
Financial support was provided by the Russian Ministry of Science and Higher Education to advance the goals of the Perm Scientific Center for Rational Mineral Use.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Karavaev, D.M., Matygullina, E.V., Sirotenko, L.D. et al. Turning of Composites Based on Thermally Expanded Graphite. Russ. Engin. Res. 41, 452–454 (2021). https://doi.org/10.3103/S1068798X21050063
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21050063