Abstract
Shape optimization of a polymer die in cyclic loading is simulated. The relation between the number of shaping cycles and the optimal die volume is established. Simulation permits determination of the cost savings for materials in the production of dies for metal forming.
Similar content being viewed by others
REFERENCES
Bogomolov, A.N., Ushakov, A.N., and Bogomolova, O.A., Stress distribution in the base of absolutely rigid stamp at the finite value of friction coefficient through stamp-soil contact, Vestn. Volgograd. Gos. Arkhit.-Stroit. Univ., Ser.: Stroit. Arkhit., 2009, no. 16 (35), pp. 20–23.
Andrianov, I.K. and Stankevich, A.V., Finite-element model of the shell-shaped half-pipes forming for blanks behavior investigating during corrugating at the stamping, Proc. Conf. “2019 International Science and Technology Conference "EastConf,” Vladivostok, March 1–2, 2019, Piscataway, NJ: Inst. Electr. Electron. Eng., 2019. https://doi.org/10.1109/Eastonf.2019.8725322
Kuzhagil’din, R.S. and Shutova, L.A., Durability of dies for hot forming, Sots.-Ekon. Tekh. Sist.: Issled., Proekt., Optim., 2019, no. 1 (80), pp. 50–58.
Andrianov, I.K. and Belykh, S.V., The finite element simulation of the stamping die optimal topology, Proc. Conf. “2019 International Science and Technology Conference "EastConf,” Vladivostok, March 1–2, 2019, Piscataway, NJ: Inst. Electr. Electron. Eng., 2019. https://doi.org/10.1109/Eastonf.2019.8725410
Andrianov, I.K., Modeling of effective material distribution of stamping equipment in forming processes, Proc. 2019 Int. Multi-Conf. on Industrial Engineering and Modern Technologies (FarEastCon), Piscataway, NJ: Inst. Electr. Electron. Eng., 2019. https://doi.org/10.1109/FarEastCon.2019.8933949
Dmitriev, A.M. and Korobova, N.V., Reducing the deformation of the dies during cold extrusion of steel glasses with actively directed stresses of contact friction on the matrix, Izv. Tul’sk. Gos. Univ., Tekh. Nauki, 2019, no. 5, pp. 72–84.
Stankevich, A.V. and Andrianov, I.K., The stress-strain state simulation of the aircraft fuselage stretch forming in the ANSYS, J. Phys.: Conf. Ser., 2019, vol. 1333, no. 8, art. ID 082002. https://doi.org/10.1088/1742-6596/1333/8/082002
Petukhovskii, S.V., Energy approach to analysis of equivalent stresses at multiple-cycle fatigue, Vestn. Mashinostr., 2018, no. 1, pp. 21–25.
Volkov, I.A., Igumnov, L.A., Sikarev, S.N., et al., Modeling the fatigue durability of polycrystalline construction alloys during the combined action of low- and multi-cycle fatigue, Probl. Prochn. Plast., 2019, vol. 81, no. 3, pp. 305–323.
Gorbovets, M.A., Khodinev, I.A., Karanov, V.A., and Yushin, V.D., Influence of the type of loading on the multi-cycle fatigue of high-temperature alloys, Tr. Vseross. Nauchno-Issled. Inst. Aviats. Mater., 2019, no. 3 (75), pp. 96–104.
Kornilova, A.V., Determination of the total durability and residual resource of the object by the multi-cycle fatigue degree, Bezop. Tr. Prom., 2008, no. 6, pp. 47–51.
Shamrovskii, A.D. and Minyailo, T.A., The phenomenon of hysteresis in solution of nonlinear problems for elastic shafted construcitons, Vost.-Evrop. Zh. Peredovykh Tekhnol., 2011, vol. 6, no. 7 (54), pp. 24–28.
Mishin, V.M., Shchitov, D.V., and Volokonskii, M.V., Transition from thermofluctuation delayed fracture to brittle fracture by shear in martensitic steel, Vestn. Tambovsk. Univ., Ser. Estestv. Tekh. Nauki, 2018, suppl., pp. 451–453.
Mukhortov, P.A., Analysis of the thermofluctuational constants of Zhurkov’s generalized equation wooden elements of composite section, Derzhavinskii Forum, 2019, vol. 3, no. 9, pp. 150–159.
Molchanov, V.I., The structural-analytical theory of polymer destruction, Vestn. Izhevsk. Gos. Tekh. Univ. im. M.T. Kalashnikova, 2009, no. 2, pp. 13-17.
Shutilin, Yu.F., Thermofluctuation description of chemical reactions of polymers, Prom. Proizvod. Ispol’z. Elastomerov, 2012, no. 1, pp. 14–17.
Mikhailov, S.V., Thermofluctuation kinetic model of spall fracture, Vopr. At. Nauki Tekh., Ser.: Teor. Prikl. Fiz., 2015, no. 2, pp. 32–45.
Kuz’min, A.A. and Yablokova, M.A., The choice of permissible stresses for calculation of the strength of plastic parts, Sovrem. Naukoemkie Tekhnol., 2016, no. 8-2, pp. 242–246.
Fetisov, K.V. and Maksimov, P.V., The results of topological optimization using the simp method and its based geometry, Prikl. Matem., Mekh. Prots. Upr., 2016, vol. 1, pp. 4–6.
Fetisov, K.V. and Maksimov, P.V., Topological optimization in the design of lightweight products for the aerospace industry, Matem. Model. Estestv. Naukakh, 2017, vol. 1, pp. 112–116.
Krotkikh, A.A. and Maksimov, P.V., The global minimum of deformation energy in the development of a topological optimization algorithm, Matem. Model. Estestv. Naukakh, 2017, vol. 1, pp. 39–43.
Buglo, S.T. and Ratner, S.B., Ustalostnaya prochnost’ i vynoslivost’ plastmass (Fatigue Durability and Strength of Plastics), Moscow: Nauchno-Issled. Inst. Tekh.-Ekon. Issled. Khim. Kompl., 1989.
Stepikheev, A.A. and Dereviskaya, V.A., Osnovy khimii vysokomolekulyarnykh soedinenii (Fundamentals of the Chemistry of High-Molecular Compounds), Moscow: Khimiya, 1976, 3rd ed.
Funding
Financial support was provided by the Russian Foundation for Basic Research (project 19-38-60020\20 “The optimization model development of the stamp forms by the method of material effective redistribution”).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Andrianov, I.K. Rod-Based Model for Optimization of a Polymer Die with Self-Heating in Cyclic Loading. Russ. Engin. Res. 41, 403–406 (2021). https://doi.org/10.3103/S1068798X21050038
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21050038