Abstract
The mechanical characteristics and adhesive strength of nickel–chromium coatings produced by the laser fusion of Ni12CrFe and PR-NiCr16SiB3 powder are compared by testing. The tensile strength of the samples and the hardness and adhesive strength of coatings on structural-steel substrates are determined.
Similar content being viewed by others
REFERENCES
Grigor’yants, A.G., Shiganov, I.N., and Misyurov, A.I., Tekhnologicheskie protsessy lazernoi obrabotki: Uchebnoe posobie dlya vuzov (Technology of Laser Treatment: Manual for Higher Education Institutions), Grigor’yants, A.G., Ed., Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2006.
Drozdov, A.A., Morozov, E.A., and Shafranov, A.V., Mechanical characteristics of cobalt-alloy samples obtained by laser surfacing, Russ. Eng. Res., 2020, vol. 40, no. 10, pp. 885–887.
Liao, Y.-D., Li, Z.-Y., and Tang, G.-Q., Evaluation for adhesion strength of coating and substrate by burying beforehand specimen, J. Wuhan Univ. Technol., Mater. Sci. Ed., 2003, vol. 18, no. 1, pp. 31–35.
Shafranov, A.V., Morozov, E.A., Muratov, K.R., et al., Adhesive strength of cobalt-alloy coatings applied by laser surfacing on structural-steel substrates, Russ. Eng. Res., 2020, vol. 40, no. 10, pp. 882–884.
Funding
Financial support was provided by the Russian Ministry of Science and Higher Education (project FSNM-2020-0028).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by B. Gilbert
About this article
Cite this article
Shafranov, A.V., Ablyaz, T.R., Muratov, K.R. et al. Mechanical Characteristics and Adhesive Strength of Nickel–Chromium Coatings Applied by Laser Cladding. Russ. Engin. Res. 41, 449–451 (2021). https://doi.org/10.3103/S1068798X21050191
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21050191