Abstract
The influence of the working fluid on the microrelief of chrome-plated parts is studied from theoretical and practical perspectives. Adjusting the relative content of the working-fluid’s components significantly affects the final surface quality.
Similar content being viewed by others
REFERENCES
Types of machining fluids and their application, Kinai Gidzyutsu, 1968, no. 83177/0.
Orlov, P.N., Saveleva, A.A., Polukhin, V.A., and Nesterov, Yu.I., Dovodka pretsizionnykh detalei mashin (Finishing of Precise Machine Parts), Moscow: Mashinostroenie, 1978.
Kremen’, Z.I., Yur’ev, V.G., and Baboshkin, A.F., Tekhnologiya shlifovaniya v mahsinostroenii (Polishing Technologies in Machine Engineering), Kremen’, Z.I., Ed., St. Petersburg, 2007.
Rebinder, P.A., Vliyanie aktivnykh smazochno-okhlazhdayushchikh zhidkostei na kachestvo poverkhnosti pri obrabotke metallov (Influence of Active Machining Fluids on Surface Quality in Metal Processing), Moscow: Akad. Nauk SSSR, 1946.
Dushko, O.V., Shumyacher, V.M., and Bashkirtseva, I.V., The effect of machining fluids on the friction coefficient of an abrasive on metal, Tekhnol. Mahsinostr., 2005, no. 12, pp. 39–41.
Bulyzhev, E.M. and Khudobin, L.V., Resursosberegayushchee primenenie smazochno-okhlazhdayushchikh zhidkostei pri metalloobrabotke (Resource-Saving Application of Machining Fluids in Metal Processing), Moscow: Mashinostroenie, 2004.
Khanov, A.M., Muratov, R.A., Muratov, K.R., and Gashev, E.A., Nanoroughness produced by systems with raster kinematics on surfaces of constant curvature, Russ. Eng. Res., 2010, vol. 30, no. 5, pp. 528–529.
Zedgenidze, I.G., Planirovanie eksperimenta dlya issledovnaiya mnogokomponentnykh sistem (Experiment Planning to Analyze the Multi-Component Systems), Moscow: Nauka, 1976.
Chmelena, T.A. and Adler, Yu.P., Experiment planning for composition-properties plots: a review, in Primenenie matematicheskikh metodov dlya issledovaniya mnogokomonentnykh sistem (Use of Mathematical Methods for Analysis of Multi-Component Systems), Moscow: Metallurgiya, 1974, pp. 11–42.
Scheffe, H., Experiments with Mixtures, J. R. Stat. Soc., 1998, vol. 20, pp. 344–360.
Funding
Financial support was provided by the Russian Ministry of Science and Higher Education (project FSNM-2020-0028).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Muratov, K.R., Gashev, E.A., Ablyaz, T.R. et al. Influence of the Coolant Concentration on the Final Surface Roughness of Chrome-Plated Parts. Russ. Engin. Res. 41, 445–448 (2021). https://doi.org/10.3103/S1068798X21050154
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X21050154