In order to improve machine performance, the optics parameters of the storage ring need to be measured accurately. The commonly used accelerator optics parameters, including momentum compaction factor and dispersion function, are key parameters that reflect the state of the machine. It is difficult to measure them with traditional methods during the user operation run. Based on a high-resolution bunch-by-bunch three-dimensional measurement system, a noninvasive measurement of momentum compaction factor and the dispersion function was performed at the Shanghai synchrotron radiation facility (SSRF). The dispersion function can be obtained purely from the direct observation results of the bunch-by bunch 3D position, based on the definition of the dispersion function during normal user operation run without perturbing the beam. The theoretical background and experimental results of the method are discussed in this paper. The measurement results are in good agreement with the design values.

• Received 8 February 2021
• Accepted 1 June 2021

DOI:https://doi.org/10.1103/PhysRevAccelBeams.24.062802

Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article’s title, journal citation, and DOI.

Published by the American Physical Society