Abstract
The 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 ceramic films were prepared using the water-based tape casting method. Two main components of the slurry are water and solids. The concentrations of other chemicals, the surfactant and binder, are at the level of 1 wt.%. Both binder and surfactant are eco-friendly polymers. Additional chemicals are not required. The optimal concentration of surfactant determined through viscosity measurements. The density of the ceramics was studied as a function of the concentration of water and binder. The density is nearly independent of amount of water despite a wide range of values of concentration. This independence is a powerful tool to cast using different techniques. The density substantially depends only on binder concentration. The polymers removal protocol of the cast films was optimized using thermogravimetric analysis. As a result, the translucent ceramic films with a relative density of 98% and thickness of 70 μm were prepared. The permittivity, remnant polarization and pyrocurrent measurements, along with the scanning electron microscopy, prove the high density of the ceramics.
Similar content being viewed by others
Data Availability
Data sharing not applicable to this article as all raw data were generated by the authors.
References
L.P. Meier, L. Urech, L.J. Gauckler, J. Eur. Ceram. Soc. 24(15-16), 3753 (2004)
M. Zhang, Z. Huang, J. Cheng, O. Yamamoto, N. Imanishi, B. Chi, J. Pu, J. Li, J. Alloys Compd. 590, 147 (2014)
J.H. Song, S.I. Park, J.H. Lee, H.S. Kim, J. Mater. Process. Technol. 198(1-3), 414 (2008)
Z. Wang, J. Qian, J. Cao, S. Wang, T. Wen, J. Alloys Compd. 437(1-2), 264 (2007)
R. Belon, R. Boulesteix, P.M. Geffroy, A. Maître, C. Sallé, T. Chartier, J. Eur. Ceram. Soc. 39(6), 2161 (2019)
M. Liu, Y. Liu, Int. J. Hydrogen Energy. 44(31), 16976 (2019)
H. Zhao, F. Tang, Y. Xie, Z. Wen, K. Tian, X. Nie, Y. Cao, D. Tang, Int. J. Appl. Ceram. Technol. 17(3), 1255 (2020)
Z. Jingxian, J. Dongliang, L. Weisensel, P. Greil, J. Eur. Ceram. Soc. 24(1), 147 (2004)
J. Blum, W. Cannon, MRS Online Proceedings Library Archive, 40 (1984)
C. Fiori, G. De Portu, in . Br. Ceram. Proc., Vol. 38, (1986), pp. 213–225
M. Ding, Y. Shi, J. Xie, D. Zhou, Y. Wang, F. Lei, L. Zhang, Int. J. Appl. Ceram. Technol. 17(1), 285 (2020)
D. Hotza, P. Greil, Materials Science and Engineering: A. 202(1-2), 206 (1995)
D. Hotza, R.K. Nishihora, R.A. Machado, P.M. Geffroy, T. Chartier, S. Bernard, Int J Ceramic Eng Sci. 1(1), 21 (2019)
R.K. Nishihora, P.L. Rachadel, M.G.N. Quadri, D. Hotza, J. Eur. Ceram. Soc. 38 (4), 988 (2018)
H. Jantunen, T. Hu, A. Uusimäki, S. Leppävuori, J. Eur. Ceram. Soc. 24(6), 1077 (2004)
R.A. Malik, J.K. Kang, A. Hussain, C.W. Ahn, H.S. Han, J.S. Lee, Appl. Phys. Express. 7(6), 061502 (2014)
Z. Yuping, J. Dongliang, P. Greil, J. Eur. Ceram. Soc. 20(11), 1691 (2000)
A. Jan, H. Liu, H. Hao, Z. Yao, M. Cao, S.A. Arbab, M. Tahir, M. Appiah, A. Ullah, M. Emmanuel, et al., J. Mater. Chem. C (2020)
Y. Sun, K. Zeng, T. Li, Science China Physics, Mechanics & Astronomy. 63(7), 1 (2020)
J.J. Choi, J.H. Lee, B.D. Hahn, W.H. Yoon, D.S. Park, Mater. Res. Bull. 43(2), 483 (2008)
R. Liang, Q.M. Wang, Sensors Actuators A Phys. 235, 317 (2015)
K. Prabhakaran, E.M. Jayasingh, S. Raghunath, C. Durgaprasad, S. Sharma, J. Mater. Process. Technol. 209(8), 4217 (2009)
W. Santa-Rosa, M. Venet, J.C. M’Peko, R. Moreno, H. Amorín, M. Algueró, J. Eur. Ceram. Soc. 39(4), 1065 (2019)
R.J.N. Quintero, S. Guillemet, J.A. Aguilar-Garib, M.E.R. Melo, B. Durand, J. Ceramic Process.Res. 13(2), 101 (2012)
K. Nagata, Ceram. Trans. 22, 335 (1991)
K. Nagata, Forming and technology for ceramics (1992)
B.P. Kumar, H. Kumar, D. Kharat, Mater. Sci. Eng. B. 127(2-3), 130 (2006)
T. Zeng, X. Dong, C. Mao, Z. Zhou, H. Yang, J. Eur. Ceram. Soc. 27(4), 2025 (2007)
Q. Jiang, L. Cross, J. Mater. Sci. 28(16), 4536 (1993)
L. Saravanan, S. Subramanian, Colloids Surf. A Physicochem. Eng. Asp. 252(2-3), 175 (2005)
J. Böhnlein-Mauß, W. Sigmund, G. Wegner, W.H. Meyer, F. Heßel, K. Seitz, A. Roosen, Adv. Mater. 4(2), 73 (1992)
M. Yu, J. Zhang, X. Li, H. Liang, H. Zhong, Y. Li, Y. Duan, D.L. Jiang, X. Liu, Z. Huang, Ceram. Int. 41(10), 14845 (2015)
M. Descamps, G. Moreau, M. Mascart, B. Thierry, J. Eur. Ceram. Soc. 13(3), 221 (1994)
V. Vinothini, P. Singh, M. Balasubramanian, Proceedings of the international symposium of research students on material science and engineering (2004)
P.M. Geffroy, T. Chartier, J.F. Silvain, Adv. Eng. Mater. 9(7), 547 (2007)
S. Lüftl, B. Balluch, W. Smetana, S. Seidler, J. Therm. Anal. Calorim. 103(1), 157 (2011)
P. Wiecinska, J. Therm. Anal. Calorim. 123(2), 1419 (2016)
M. Razzak, S. Dewi, H. Lely, E. Taty, et al., Radiat. Phys. Chem. 55(2), 153 (1999)
M. Zheng, M. Gu, Y. Jin, G. Jin, Mater. Sci. Eng. B. 77(1), 55 (2000)
R.K. PP, S. Vijayan, P. Wilson, P.A. Kumar, K. Prabhakaran, Ceram. Int. 45 (15), 18543 (2019)
O. Noblanc, P. Gaucher, G. Calvarin, J. Appl. Phys. 79(8), 4291 (1996)
R. Wongmaneerung, A. Rittidech, O. Khamman, R. Yimnirun, S. Ananta, Ceram. Int. 35(1), 125 (2009)
K.P. Chen, C. Li, X. Zhang, Y. Huang, Mater. Lett. 57(1), 20 (2002)
T.R. Shrout, Z.P. Chang, N. Kim, S. Markgraf, Ferroelectrics Letters Section. 12(3), 63 (1990)
B. Noheda, D. Cox, G. Shirane, R. Guo, B. Jones, L. Cross, Phys. Rev. B. 63 (1), 014103 (2000)
X. Zhao, J. Wang, Z. Peng, K.H. Chew, H. Chan, C. Choy, H. Luo, Physica B: Condensed Matter. 339(2-3), 68 (2003)
S. Choi, T.R. Shrout, S. Jang, A. Bhalla, Mater. Lett. 8(6-7), 253 (1989)
Acknowledgements
This project has received funding from the Research Council of Lithuania (LMTLT), agreement No S-LLT-20-4.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interests
The authors declare that they have no conflict of interest.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kudrevičius, T., Plyushch, A., Ivanov, M. et al. Aqueous tape casting of the 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 ceramic films: Production optimization and properties. J Electroceram 46, 20–25 (2021). https://doi.org/10.1007/s10832-021-00240-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10832-021-00240-z