Abstract
A method to determine the energy released in the elements of pulsed systems with powerful capacitive energy storage devices has been proposed. The method is based on an experimental study of a typical shape of current pulse in the device and determining the frequency range in which the research should be carried out, on determining the frequency characteristics of individual elements of the power-supply system of the device and development of their equivalent circuits that are typical for a given frequency range, and on the development and investigation of a general equivalent circuit for a pulse device. The results of calculations of the energy-loss distribution for a high-voltage electrophysical setup used to produce ultradispersed particles have been considered. It is shown that, when determining the equivalent circuit of a powerful capacitive storage, it is necessary to take into account the ways of connection of individual elements of this device. Comparison of the results of numerical simulations of the current and voltage distribution on individual elements of the device with the experiments has shown that the results obtained using the suggested method have a rather high accuracy.
Similar content being viewed by others
REFERENCES
Yushkov, A.Yu., Electropulse destruction of rocks, Sovrem. Nauchn. Issled. Innovatsii, 2015, no. 4–2. http://web.snauka.ru/issues/2015/04/52486. Accessed January 11, 2021.
Burtsev, V.L., Elektricheskii vzryv provodnikov i ego primenenie v elektrofizicheskikh ustanovkakh (Electrical Explosion of Semiconductors and Its Application in Electrophysical Installations), Moscow: Energoatomizdat, 1990.
Goncharov, V.D. and Yashkardin, R.V., The experimental study of spacial distribution of particles produced in the pulse arc discharge, IOP Conf. Ser.: Mater. Sci. Eng., 2018, vol. 387, art. ID 012021. https://iopscience.iop.org/article/10.1088/1757-899X/ 387/1/012021/meta. Accessed January 11, 2021.
Kakaurov, S.V., Yudin, A.S., and Suvorov, I.F., Water disinfection with a diaphragm electric discharge, Materialy XVII Mezhdunarodnoi nauchno-prakticheskoi konferentsii “Sovremennye tekhnika i tekhnologii” (Proc. XXVII Int. Sci.-Pract. Conf. “Modern Technics and Technologies”), Tomsk: Tomsk. Politekh. Univ., 2011, vol. 1.
Baranov, M.I., Erosion of electrodes in a switchboard of a high-voltage electrophysical plant, Russ. Electr. Eng., 2019, vol. 90, no. 1.
Tarkovskiy, V.V., Vasilevich, A.E., Balykin, A.S., Stakheyko, P.N., Levanovich, A.V., Sakovich, E.I., Filipovich, S.M., and Skripko, A.N., A powerful and compact electro-hydraulic device for demolishing concrete structures and mining rocks during rescue operations, Saf. Fire Techn., 2015, vol. 40, no. 4.
Usachev, A.E., Ispytatel’nye i elektrofizicheskie ustanovki vysokogo napryazheniya: poluchenie vysokikh napryazhenii (Testing and Electrophysical High-Voltage Installations: Generation of High Voltages), Kazan: Kazan. Gos. Energ. Univ., 2014.
Raizer, Yu.P., Gas Discharge Physics, Berlin: Springer-Verlag, 1991.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by M. Astrov
About this article
Cite this article
Goncharov, V.D., Yashkardin, R.V. A Method for Calculating the Balance of Energy Released in Elements of High-Power Pulse Installations. Russ. Electr. Engin. 92, 159–162 (2021). https://doi.org/10.3103/S1068371221030056
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068371221030056