Abstract
In this work, interchange reactions between poly(lactic acid) and poly(ethylene-co-vinyl acetate) is catalyzed by adding samarium acetylacetonate aiming to create a catalytic transesterification reaction and compatibilization between polymer blends. The impact of the samarium acetylacetonate content on transesterification reactions was studied. The FTIR analysis shows that all exposed samples exhibited an increase in the absorption of the carbonyl region with augmentation of vinyl acetate and catalyst content. The results of torque analysis show that the mixing torque reduces with increasing the content of the catalyst due to the contribution of its plasticizing effect in reducing of the mixture viscosity and the significant structural changes. DSC analysis illustrates that the glass transition temperature values of both polymers were unaffected after blending indicating their immiscibility. However, during melt mixing of polymers with catalyst, decrease of the glass transition, crystallization and melting temperatures are observed. The mechanical performance of blend is enhanced with the addition of catalyst.
Similar content being viewed by others
REFERENCES
H. Tsuji and Y. Ikada, Polymer 36, 2709 (1995).
M. Barkhed, B. Abu-Jdayil, and A.-H. I. Mourad, in Proceedings of “AIChE Annual Meeting”, Orlando, USA 2019 (Orlando, 2019), p. 720.
Y. B. Kim, W. G. Hwang, C. D. Kee, and H. B. Yi, Proc. Inst. Mech. Eng., Part D 215, 865 (2001).
R. M. Rasal and A. V Janorkar, Prog. Polym. Sci. 35, 338 (2010).
S. Kobayashi and S. Sugimoto, JSME Int. J., Ser. A 2, 15(2008).
K. M. Schreck and M. A. Hillmyer, J. Biotechnol. 132, 287 (2007).
Y. Li and H. Shimizu, Macromol. Biosci. 7, 921 (2007).
S.-M. Lai, S.-H. Wu, G.-G. Lin, and T.-M. Don, Eur. Polym. J. 52, 193 (2014).
H. Al Jassmi, F. Al Najjar, and A.-H. I. Mourad, IOP Conf. Ser.: Mater. Sci. Eng. 324, 12088 (2018).
H. Zhao, Z. Cui, X. Wang, L.-S. Turng, and X. Peng, Composites, Part B 51, 79 (2013).
A. Araújo, G. Botelho, M. Oliveira, and A. V Machado, Appl. Clay Sci. 88, 144 (2014).
P. Badrinarayanan, F. K. Ko, C. Wang, B. A. Richard, and M. R. Kessler, Polym. Test. 35, 1 (2014).
T. Tang, X. Chen, H. Chen, X. Meng, Z. Jiang, and W. Bi, Chem. Mater. 17, 2799 (2005).
H. M. Cele, V. Ojijo, H. Chen, S. Kumar, K. Land, T. Joubert, M. F. R. De Villiers, and S. S. Ray, Polym. Test. 36, 24 (2014).
M. A. Rahman, D. De Santis, G. Spagnoli, G. Ramorino, M. Penco, V. T. Phuong, and A. Lazzeri, J. Appl. Polym. Sci. 129, 202 (2013).
O. Gordobil, I. Egüés, R. Llano-Ponte, and J. Labidi, Polym. Degrad. Stab. 108, 330 (2014).
R. Liu, S. Luo, J. Cao, and Y. Peng, Composites, Part A 51, 33 (2013).
A. F. Koutsomitopoulou, J. C. Bénézet, A. Bergeret, and G. C. Papanicolaou, Powder Technol. 255, 106 (2014).
A. N. Frone, S. Berlioz, J.-F. Chailan, and D. M. Panaitescu, Carbohydr. Polym. 91, 377 (2013).
R. Pantani, G. Gorrasi, G. Vigliotta, M. Murariu, and P. Dubois, Eur. Polym. J. 49, 3471 (2013).
N. Nakayama and T. Hayashi, Polym. Degrad. Stab. 92, 1255 (2007).
A. M. Henderson, IEEE Electr. Insul. Mag. 9, 30 (1993).
P. M. Kamath and R. W. Wakefield, J. Appl. Polym. Sci. 9, 3153 (1965).
X. Shi, J. Zhang, D. Li, and S. Chen, J. Appl. Polym. Sci. 112, 2358 (2009).
J. Jin, S. Chen, and J. Zhang, Polym. Degrad. Stab. 95, 725 (2010).
A. Martínez-García, A. Sánchez-Reche, S. Gisbert-Soler, C. M. Cepeda-Jiménez, R. Torregrosa-Maciá, and J. M. Martín-Martínez, J. Adhes. Sci. Technol. 21, 441 (2007).
J.-S. Yoon, S.-H. Oh, M.-N. Kim, I.-J. Chin, and Y.‑H. Kim, Polymer 40, 2303(1999).
A. M. Gajria, V. Dave, R. A. Gross, and S. P. McCarthy, Polymer 37, 437 (1996).
K. S. Anderson and M. A. Hillmyer, Polymer 45, 8809 (2004).
Y. Li, L. Liu, Y. Shi, F. Xiang, T. Huang, Y. Wang, and Z. Zhou, J. Appl. Polym. Sci. 121, 2688 (2011).
P. Ma, D. G. Hristova-Bogaerds, J. G. P. Goossens, A. B. Spoelstra, Y. Zhang, and P. J. Lemstra, Eur. Polym. J. 48, 146 (2012).
E. C. L. Pereira, J. M. F. da Silva, R. B. Jesus, B. G. Soares, and S. Livi, Eur. Polym. J. 97, 104 (2017).
I. Moura, R. Nogueira, V. Bounor-Legaré, and A. V. Machado, React. Funct. Polym. 71, 694(2011).
N. Chelghoum, M. Guessoum, M. Fois, and N. Haddaoui, J. Polym. Environ. 26, 342 (2018).
V. N. Ignatov, C. Carraro, V. Tartari, R. Pippa, M. Scapin, F. Pilati, C. Berti, M. Toselli, and M. Fiorini, Polymer 38, 195 (1997).
V. N. Ignatov, C. Carraro, V. Tartari, R. Pippa, M. Scapin, F. Pilati, C. Berti, M. Toselli, and M. Fiorini, Polymer 38, 201 (1997).
C. Berti, V. Bonora, F. Pilati, and M. Fiorini, Makromol. Chem. 193, 1665 (1992).
M. I. Babaghayou, A.-H. I. Mourad, V. Lorenzo, S. F. Chabira, and M. Sebaa, Polym. Test. 66, 146 (2018).
M. I. Babaghayou, A.-H. I. Mourad, V. Lorenzo, M. U. de la Orden, J. M. Urreaga, S. F. Chabira, and M. Sebaa, Mater. Des. 111, 279 (2016).
F. H. Mohamed, A.-H. I. Mourad, and D. C. Barton, Plast. Rubber Compos. 37, 346 (2008).
A. Dehbi and A.-H. I. Mourad, Arab. J. Chem. 9, S282 (2016).
A.-H. I. Mourad, Mater. Des. 31, 918 (2010).
A.-H. I. Mourad, M. S. Al Mansoori, L. A. Al Marzooqi, F. A. Genena, and N. Cherupurakal, in Proceedings of “Pressure Vessels and Piping Conference”, Prague, Czech Republic, 2018 (Prague, 2018), p. V06AT06A042.
A.-H. I. Mourad, N. Zaaroura, and N. Cherupurakal, Karbala Int. J. Mod. Sci. 5, 5 (2019).
M. I. Babaghayou, A.-H. I. Mourad, and N. Cherunurakal, in Proceedings of 2020 “Advances in Science and Engineering Technology International Conferences (ASET)”, Dubai, UAE, 2020 (Dubai, 2020), pp. 1–3.
E. B. Mejia, S. Al-Maqdi, M. Alkaabi, A. Alhammadi, M. Alkaabi, N. Cherupurakal, and A.-H. I. Mourad, in Proceedings of 2020 “Advances in Science and Engineering Technology International Conferences (ASET)”, Dubai, UAE, 2020 (Dubai, 2020), pp. 1–6.
R. Z. Habib, M. M. S. Abdoon, R. M. Al Meqbaali, F. Ghebremedhin, M. Elkashlan, W. F. Kittaneh, N. Cherupurakal, A.-H. I. Mourad, T. Thiemann, and R. Al Kindi, Environ. Pollut. 258, 113831 (2020).
E. Quero, A. J. Müller, F. Signori, M. Coltelli, and S. Bronco, Macromol. Chem. Phys. 213, 36 (2012).
N. Shi and Q. Dou, Polym. Compos. 35, 1570 (2014).
I. Moura, G. Botelho, and A. V Machado, J. Polym. Environ. 22, 148 (2014).
A.-H. I. Mourad and N. Zaaroura, J. Mater. Eng. Perform 27, 4453 (2018).
M. S. Mozumder, A.-H. I. Mourad, A. Mairpady, H. Pervez, and M. E. Haque, J. Mater. Eng. Perform. 27 2166 (2018).
A.-H. I. Mourad, M. S. Mozumder, A. Mairpady, H. Pervez, and U. M. Kannuri, Materials 10, 85 (2017).
A.-H. I. Mourad, N. Bekheet, A. El-Butch, L. Abdel-Latif, D. Nafee, and D. C. Barton, Polym. Test. 24 169 (2005).
A. Dehbi, A.-H. I. Mourad, K. Djakhdane, and A. Hilal-Alnaqbi, Polym. Eng. Sci. 55, 287 (2015).
A.-H. I. Mourad, A. H. Idrisi, M. C. Wrage, andB. M. Abdel-Magid, Composites, Part B 168, 243 (2019).
A.-H. I. Mourad, H. F. Elsayed, D. C. Barton, M. Kenawy, and L. A. Abdel-Latif, Int. J. Fract. 120 501 (2003).
D. Zhang, H. Liang, J. Bu, L. Xiong, S. Huang, D. D. Zhang, H. B. Liang, J. Bu, L. Xiong, and S. M. Huang, J. Appl. Polym. Sci. 132, 42095 (2015).
L. Bellamy, The Infra-Red Spectra of Complex Molecules (Springer Science & Business Media, the Netherlands, 2013).
L. Zhang, L. R. Kucera, S. Ummadisetty, J. R. Nykaza, Y. A. Elabd, R. F. Storey, K. A. Cavicchi, and R. A. Weiss, Macromolecules 47, 4387 (2014).
J. Glikman, R. Arnaud, J. Lemaire, and H. Seinera, Chem. Phys. 188, 987 (1987).
J. Zhang, K. Tashiro, H. Tsuji, and A. J. Domb, Macromolecules 41, 1352 (2008).
I. Mayouf, M. Guessoum, M. Fuensanta, and J. M. Martín Martìnez, Polym. Eng. Sci. 5, 944 (2020).
J. R Rocca-Smith, T. Arbowiak, E. Marcuzzo, A. Sensidoni, F. Piasente, D. Champion, and F. Debeaufort, Polym. Degrad. Stab. 132, 109 (2016).
A. H. Mohsen and N. A. Ali, J. Biorem. Biodegrad. 9, 455 (2018).
G. Kister, G. Cassanas, and M. Vert, Polymer 39, 267 (1998).
W. Zheng, Z. Qi, and F. Wang, Polym. Int. 34, 307 (1994).
Y.-J. Park and H.-J. Kim, Int. J. Adhes. Adhes. 23, 383 (2003).
A.-H. I. Mourad, R. O. Akkad, A. A. Soliman, and T. M. Madkour, Plast. Rubber Compos. 38 265 (2009).
K. Djakhdane, A. Dehbi, A.-H. I. Mourad, A. Zaoui, and P. Picuno, Plast. Rubber Compos. 45 346 (2016).
A.-H. I. Mourad and A. Dehbi, Plast. Rubber Compos. 43, 111 (2014).
A.-H. I. Mourad, O. G. Ayad, A. Rahman, A. Hilal-Alnaqbi, and B. I. Abu-Jdayil, in Proceedings of “Pressure Vessels and Piping Conference”, Vancouver, Canada, 2016 (Vancouver, 2016), p. V06AT06A030.
A.-H. I. Mourad, H. Fouad, and R. Elleithy, Mater. Des. 30, 4112 (2009).
M.I. Babaghayou, A.-H. I. Mourad, A. Ochoa, F. Beltrán, and N. Cherupurakal, Polym. Bull. (2020). https://doi.org/10.1007/s00289-020-03363-5
K. Agroui, G. Collins, and J. Farenc, Renewable Energy 43, 218 (2012).
V. T. Phuong, M.-B. Coltelli, P. Cinelli, M. Cifelli, S. Verstichel, and A. Lazzeri, Polymer 55, 4498 (2014).
A. Alizadeh, L. Richardson, J. Xu, S. McCartney, H. Marand, Y. W. Cheung, and S. Chum, Macromolecules 32, 6221 (1999).
E. Bureau, C. Cabot, S. Marais, and J. M. Saiter, Eur. Polym. J. 41, 1152 (2005).
Author information
Authors and Affiliations
Corresponding author
Supplementary Information
Rights and permissions
About this article
Cite this article
Aouadi, N.EH., Hellati, A., Guessoum, M. et al. Impact of Samarium Acetylacetonate Catalyst on the Compatibilization of Poly(lactic acid)/Poly(ethylene-co-vinyl acetate) Blends: Thermomechanical, Chemical, and Viscoelastic Characterizations. Polym. Sci. Ser. B 63, 218–231 (2021). https://doi.org/10.1134/S1560090421030027
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1560090421030027