Abstract
This paper presents an efficient design of several inverse filters, ILPF, IHPF, IBPF and IBRF. The designs are based on a modified second-generation voltage conveyor (VCII). The proposed filters utilize four grounded passive components and two active blocks. Moreover, the designed circuits can be either a current-mode or a voltage-mode depending on the application under consideration. The functionality of the designed filters was confirmed using 0.18 µm TSMC CMOS process technology. The proposed circuits are powered from ± 0.9 V DC supply.
Similar content being viewed by others
References
Gupta, S.; Bhaskar, D.; Senani, R.; Singh, A.: Inverse active filters employing CFOAs. Elect Eng. 91, 23–26 (2009)
Leuciuc, A.: Using nullors for realization of inverse transfer functions and characteristics. Electron Lett 33, 949–951 (1997)
Chipipop, B.; Surakampontorn, W.: Realization of current-mode FTFN- based inverse filter. Electron Lett 35, 690–693 (1999)
Wang, H.C.; Lee, T.: Using nullors for realization of current-mode FTFN-based inverse filters. Electron Lett 35, 1889–1894 (1999)
Abuelma’atti, M.: Identification of cascadable current-mode filters and inverse-filters using single FTFN. Frequenz 54, 11–12 (2000)
Shah, N.; Quadri, M.; Iqbal, S.: High output impedance current- mode all pass inverse filter using CDTA. Indian J Pure Appl Phys 46, 893–896 (2008)
Gupta, S.; Bhaskar, D.; Senani, R.: New Analogue inverse filters realized with current feedback op-amps. Int J Electron 98(8), 1103–1113 (2011)
Safari, L.; Barile, G.; Stornelli, V.; Ferri, G.: An overview on the second generation voltage conveyor: feature, design and applications. IEEE Trans Circ Syst-II: Express Brief 66(4), 547–551 (2019)
Safari, L.; Youcem, E.; Minai, S.; Ferri, G.; Stornelli, V.: A second-generation voltage conveyor(VCII)-based simulated grounded inductor. Int J Circuit Theory Appl 48, 1180–1193 (2020)
Banerjee, S., Ghosh, M., and Mondal, P. (2019) OTRA based realization of second order inverse low pass filter and inverse band pass filter, International conference on communication and signal processing, India, April 4–6
Bhagat, R.; Bhaskar, D.; Kumar, P.: CMOS CDBA-Based Inverse Filter Structure, International Journal of Innovative Technology and Exploring. Engineering 9(3), 2278–3075 (2020)
Ram, B.; Bhaskar, D.; Pragati, K.: Multifunction filter/inverse filter configuration employing CMOS CDBAs. Int J Recent Technol Eng (IJRT) 8(4), 8844–8853 (2019)
Jyoti, S., Ram, B.,” Analog inverse filters using OTAs,” International Conference on Control, Automation and Robotics, pp.627–631, (2020).
Tsukutani, T.; Kunugasa, Y.; Yabuki, N.: CCII-based inverse active filters with grounded passive components. J Electr Eng 6, 212–215 (July 2018)
Acknowledgements
The authors acknowledge the support of King Fahd University of Petroleum & Minerals.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Al-Shahrani, S.M., Al-Absi, M.A. Efficient Inverse Filters based on Second-Generation Voltage Conveyor (VCII). Arab J Sci Eng 47, 2685–2690 (2022). https://doi.org/10.1007/s13369-021-05775-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13369-021-05775-5